tp-link Deco BE85 BE22000 Whole Home Mesh Wi-Fi 7 System User Guide
- June 9, 2024
- tp-link
Table of Contents
tp-link Deco BE85 BE22000 Whole Home Mesh Wi-Fi 7 System User Guide
About This Guide
This guide provides a brief introduction to BE22000 Whole Home Mesh Wi-Fi 7 System and regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.
Conventions
In this guide, the following conventions are used:
More Info
- Specific product information can be found on the product page at https://www.tp-link.com.
- A Technical Community is provided for you to discuss our products at https://community.tp-link.com.
- Our Technical Support contact information can be found at the Help center of the Deco app and the Contact Technical Support page at https://www.tp-link.com/support.
Speed/Coverage/Device Quantity Disclaimer
Maximum wireless signal rates are the physical rates derived from IEEE
Standard 802.11 specifications. Actual wireless data throughput and wireless
coverage, and quantity of connected devices are not guaranteed and will vary
as a result of network conditions, client limitations, and environmental
factors, including building materials, obstacles, volume and density of
traffic, and client location.
MU-MIMO Disclaimer Use of MU-MIMO requires clients to also support MU-MIMO.
IoT Compatibility Disclaimer IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use.
Seamless Roaming Disclaimer Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device.
HomeShield Disclaimer HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield for more information.
Appearance
Each Deco has an LED that changes color according to its status, a WPS button,
two 2.5 Gbps WAN/LAN ports, a 10 Gbps WAN/LAN port, a 10 Gbps RJ45/SFP+
WAN/LAN Combo port, a USB 3.0 port, a power slot, and a Reset button. See the
explanation below:
Tip: The product label can be found at the bottom of the product.
Set Up Your Deco
First let’s start by setting up the Deco network. Get the TP-Link Deco app for iOS or Android, then follow the app to walk through the setup.
- Get the Deco app
Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet.
https://www.tp- link.com/app/qrcode/?app=deco
-
Log in or sign up with TP-Link ID
Open the app and log in with your TP-Link ID. If you don’t have a TP-Link ID, create one first.
Note: If you forgot your login password, tap Forgot Password?. The app will help you reset your password.
-
Select your Deco model
Search for and select your Deco model. If you have more than one Deco model, tap the question below the search box to check how to maximize the overall network.
-
Plug in your Deco
Power off your modem. Connect your Deco to the modem and power them both on.
If you don’t have a modem, connect your Deco directly to the Ethernet outlet .
-
Wait until Deco’s LED pulses blue
Wait until your Deco’s LED pulses blue, then your phone/tablet will connect to the Deco’s default Wi-Fi automatically.
-
Specify your Deco’s location
Select or custom a location for your Deco. The location will be used as the name of your Deco.
-
Connect your Deco to the internet
Select the internet connection type and enter the information. If you are not sure, contact your internet service provider.
-
Create your Wi-Fi network
Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi.
-
Create your MLO network
Set a network name and a password. The MLO network enables Wi-Fi 7 clients to connect to multiple bands simultaneously.
-
Keep your Deco up-to-date
Set auto update time. This allows your Deco to automatically update to the latest firmware which provides better network experience.
-
Connect to your Wi-Fi network
Connect your phone/tablet to the Deco’s Wi-Fi.
-
Use Deco’s Combo Pair
The Combo pair includes an Ethernet port and an SFP+ port. Only one port in the pair can be used at a time.
-
Setup complete
Your Deco network is now up. You can connect your devices to the Deco network. Plug in the other included Decos, and they will automatically join the network within 2 minutes.
-
Add more Decos
Plug in the other included Decos, and they will automatically join the network within 2 minutes.
-
Troubleshooting
Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support
Q1. What should I do if I fail to configure the main Deco and get stuck on “We couldn’t find Deco”? Refer to the guide https://www.tp- link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM
Q2. What should I do if I fail to configure the satellite Deco and get stuck on “We couldn’t find another Deco”? Refer to the guide https://www.tp- link.com/support/faq/1447/ or follow the video https://youtu.be/iVgDzoo16T4
Q3. What should I do if I fail to configure the main Deco and get stuck on “Testing Internet Connection”? Refer to the guide https://www.tp- link.com/support/faq/2239/ Refer to the video https://youtu.be/OSUrGdWH-i0
Q4. What should I do if my wireless devices cannot connect to Deco? Refer to the guide https://www.tp-link.com/support/faq/2718/
Q5. What should I do if Deco suddenly lost internet access? Refer to the guide https://www.tp-link.com/support/faq/2428/
Q6. How can I find a suitable spot for my Deco? Refer to the guide https://www.tp-link.com//support/faq/1446/
Q7. What can I do if the Deco app isn’t working properly? Refer to the guide https://www.tp-link.com/support/faq/1456/
Authentication
FCC Compliance Information Statement
Product Name: BE22000 Whole Home Mesh Wi-Fi 7 System
Model Number: Deco BE85
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio
or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter. To comply
with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. FCC regulations restrict operation of this device to indoor
use only. The operation of this device is prohibited on oil platforms, cars,
trains, boats, and aircraft, except that operation of this device is permitted
in large aircraft while flying above 10000 feet. Operation of transmitters in
the 5.925-7.125 GHz band is prohibited for control of or communications with
unmanned aircraft systems. We, TP-Link USA Corporation, has determined that
the equipment shown as above has been shown to comply with the applicable
technical standards, FCC part 15. There is no unauthorized change is made in
the equipment and the equipment is properly maintained and operated.
Issue Date: 2023-03-24
FCC Compliance Information Statement
Product Name: I.T.E POWER SUPPLY
Model Number: T150500-2-DT / S065PQ1200500
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. FCC
regulations restrict operation of this device to indoor use only. The
operation of this device is prohibited on oil platforms, cars, trains, boats,
and aircraft, except that operation of this device is permitted in large
aircraft while flying above 10000 feet. Operation of transmitters in the
5.925-7.125 GHz band is prohibited for control of or communications with
unmanned aircraft systems. We, TP-Link USA Corporation, has determined that
the equipment shown as above has been shown to comply with the applicable
technical standards, FCC part 15. There is no unauthorized change is made in
the equipment and the equipment is properly maintained and operated.
Issue Date: 2023-03-24
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Caution:
The device for operation in the band 51505250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems; DFS (Dynamic Frequency Selection) products that operate in the bands
5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. ISED regulations restrict
operation of this device to indoor use only. The operation of this device is
prohibited on oil platforms, cars, trains, boats, and aircraft, except that
operation of this device is permitted in large aircraft while flying above
10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is
prohibited for control of or communications with unmanned aircraft systems.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
ISED regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Adapter shall be installed near the equipment and shall be easily accessible.
- Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
- Operating Temperature: 0°C~40°C (32°F~104°F)
- This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Documents / Resources
| tp-
link Deco BE85 BE22000 Whole Home Mesh Wi-Fi 7
System
[pdf] User Guide
Deco BE85 BE22000 Whole Home Mesh Wi-Fi 7 System, Deco BE85, BE22000 Whole
Home Mesh Wi-Fi 7 System, Whole Home Mesh Wi-Fi 7 System, Home Mesh Wi-Fi 7
System, Mesh Wi-Fi 7 System
---|---
| tp-
link Deco BE85 BE22000 Whole Home Mesh Wi-Fi 7
System
[pdf] User Guide
Deco BE85 BE22000 Whole Home Mesh Wi-Fi 7 System, Deco BE85, BE22000 Whole
Home Mesh Wi-Fi 7 System, Mesh Wi-Fi 7 System, Wi-Fi 7 System
References
- Link: Simple, secure one-click payments
- HomeShield | TP-Link Australia
- WiFi Networking Equipment for Home & Business | TP-Link
- TP-Link Community
- WiFi Networking Equipment for Home & Business | TP-Link
- How can I find a suitable spot for my Deco? | TP-Link
- How can I find a suitable spot for my Deco? | TP-Link
- HomeShield | TP-Link Hong Kong
- Main Deco Failed to Complete Setup | TP-Link Hong Kong
- TP-Link Product Support - Wireless Networking Equipment Support
- What can I do if the Deco app isn't working properly | TP-Link
- Main Deco Failed to Complete Setup | TP-Link
- The internet connection is unstable or suddenly stops working when connected to the Deco network? | TP-Link
- The internet connection is unstable or suddenly stops working when connected to the Deco network? | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>