BK TECHNOLOGIES BKR0300 Desktop Smart Charger Instruction Manual
- June 9, 2024
- BK TECHNOLOGIES
Table of Contents
BK TECHNOLOGIES BKR0300 Desktop Smart Charger
BKR0300 Battery Charger
The BKR0300 Battery Charger is a device designed to charge BKR0101 Lithium
Ion Batteries.
User Instructions
READ FIRST:
- CAUTION: RISK OF ELECTRIC SHOCK
- CAUTION: DRY LOCATION USE ONLY
- FOR USE WITH LISTED CLASS 2 TRANSFORMER(S).
- THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
- THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
- THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, IN-CLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERA-TION.
- THIS CLASS B APPARATUS COMPLIES WITH CANADIAN ICES-003. FOR USE WITH BKR0101 LITHIUM ION BATTERIES ONLY.Charger Status Indicators
NOTE:
- DO NOT TRANSMIT WHILE CHARGING THE BATTERY
- ALWAYS SWITCH OFF A RADIO EQUIPPED WITH A BATTERY BEFORE INSERTING THE RADIO INTO THE CHAR-GER.
- BATTERY PACK IS NOT CHARGED AT THE FACTORY. PLEASE CHARGE BEFORE USE.
Charger Status Indicators
Solid GREEN| Fully Charged
Flashing GREEN| Charging ≥ 90%
Solid RED| Charging
Solid AMBER| Charged / Low Capacity
Alternating AMBER-GREEN| Fully Charged / Unknown Battery
Flashing AMBER| Waiting to Charge
Flashing RED| Fault
PRODUCT OVERVIEW
Indicators
The charger has different status indicators that show the current status of the battery being charged. These indicators are:
- Solid GREEN: Indicates that the battery is fully charged.
- Flashing GREEN: This indicates that the battery is currently charging and is at 90% capacity.
- Solid RED: Indicates that the battery is currently being charged.
- Solid AMBER: This indicates that the battery is either fully charged or has low capacity.
- Alternating AMBER-GREEN: Indicates that the battery is fully charged or that the charger is unable to determine the battery’s status.
- Flashing AMBER: Indicates that the charger is waiting to charge the battery.
- Flashing RED: Indicates that there is a fault with the charger or the battery.
Product Usage Instructions
To use the BKR0300 Battery Charger, follow these steps:
- Connect the power connector to a power source.
- Insert the BKR0101 Lithium Ion Battery into the charging pocket.
- Observe the charging status LED to determine the current status of the battery being charged based on the status indicators described above.
- Once the battery is fully charged, remove it from the charging pocket and disconnect the power connector from the power source.
Note: Only use the BKR0300 Battery Charger with BKR0101 LithiumIon Batteries.
BK Technologies
7100 Technology Drive West Melbourne, FL 32904
1-800-648-0947
www.bktechnologies.com
©2020 BK Technologies
PN 7001-31156-100 REV. 08-20