KESKO J0909248 Isover Ultimate Mineral Wool Instructions

June 9, 2024
KESKO

KESKO-LOGO

KESKO J0909248 Isover Ultimate Mineral Wool

KESKO-J0909248-Isover-Ultimate-Mineral-Wool-PRODUCT

Product Information

The Safe Use Instruction Sheet provides information on the safe use of ISOVER ULTIMATE mineral wool, which is a man-made vitreous (silicate) fiber with random orientation and alkaline and alkali earth oxides content greater than 18% by weight. The product is recommended for thermal, acoustic, and/or fire insulation purposes. The product is manufactured by Saint-Gobain ISOVER G+H AG and is not classified as a hazardous substance or mixture. However, dust from the product may cause temporary skin itching due to coarse fibers.

Product Usage Instructions

  1. Inhalation: If inhaled, remove from exposure and provide fresh air. Rinse throat and blow nose to clear dust.
  2. Skin Contact: In case of skin contact, wash skin gently with cold water and soap.
  3. Eye Contact: If the product comes in contact with eyes, do not rub eyes. Rinse gently and abundantly with water. If necessary, seek medical advice.
  4. Ingestion: If ingested, drink plenty of water.
  5. If first aid measures do not provide relief or discomfort continues, seek medical advice.

Note:
that the product may contain small quantities of water-repellent additives, coupling agent, adhesives, and/or facing,  depending on the application. It is recommended to follow the handling instructions provided in sections 7 and 8 of the Safe Use Instruction Sheet when using ISOVER ULTIMATE mineral wool products.

Identification

Identification of the substance/mixture and of the company/undertaking
  • Product identifier ISOVER ULTIMATE mineral wool

  • Relevant identified uses of the substance or mixture and uses advised against
    Recommended use: Thermal, acoustic and/or fire insulation.

  • Details of the supplier of the Safe Use Instruction Sheet

    • SAINT-GOBAIN ISOVER G+H AG
    • D – 67059 Ludwigshafen/Rhein
    • Phone Hochbau-Themen: ++49 (0)900 – 3501201 (see section 16)
    • Phone Trockenbau-Themen: ++49 (0)900 – 3776347 (see section 16)
    • E-Mail: Isover.de/Kontakt
Hazards identification
  • Classification of the substance or mixture
    No hazards are associated with ISOVER ULTIMATE Mineral Wool. Nevertheless, please observe the information given in this safe use instructions sheet.

  • Label elements
    According to Regulation (EC) No 1272/2008 no hazard labeling is required.

  • Other hazards
    Dust:
    Mineral wool products may cause temporary skin itching due to the well-known mechanical effect of coarse fibers. For the handling of ISOVER ULTIMATE mineral wool products we recommend to follow the instructions of sections 7 + 8. 3.

 Composition/information on ingredients
  • In Consideration of Commission Regulation (EU) 2015/830. Safety data sheets are mandatory only for dangerous substances and mixtures. ISOVER ULTIMATE mineral wool products are NOT dangerous.
  • This safe use instruction sheet covers only ULTIMATE mineral wool manufactured by Saint-Gobain ISOVER G+H AG.

Chemical identity


Substance

| ****

C.A.S. Number (EC-Number)

| ****

REACH

Reg.Nr.:

| ****

Amount weight (%)

| Classification and

labelling (Regulation (EG) 1272/2008)

---|---|---|---|---
Man-made vitreous (silicate) fibers with random orientation with alkaline and alkali                    earth                         oxides (Na2O+K2O+CaO+MgO+BaO)

content greater than 18% by weight and fulfilling one of the Nota Q conditions. *

| ****


(926-099-9)

| ****


01-2119472313-44-

0035

| ****


90 – 100 %

| ****


Not classified

Terpolymer binder| –| –| 0 – 10 %| Not classified
Thermosetting polymer on basis of

saccarides

| –| –| 0 – 10 %| Not classified
Mineraloil| –| –| 0 – 0,5 %| Not classified

ISOVER ULTIMATE mineral wool products are also exonerated from German laws (Annex I, chapter 23) and (Annex II, Nr.5). Dependent on application ISOVER ULTIMATE mineral wool products may contain small quantities of water-repellent additives, coupling agent, adhesive and/or face.

Measures

First aid measures
  • Description of first aid measures

    • In case of inhalation: Remove from exposure and provide for fresh air. Rinse throat and blow nose to clear dust.
    • In case of skin contact: Wash skin gently with cold water and soap.
    • In case of eye contact: Do not rub eyes, rinse gently and abundantly with water, if necessary, call on medical advice.
    • In case of ingestion: Drink plenty of water.
      If first aid measures don’t produce relief or discomfort continues, call on medical advice.
  • Most important symptoms and effects, both acute and delayed
    Mineral wool products may cause temporary itching on skin, eyes or mouth due to the well-known mechanical effect of coarse fibers.

  • Indication of any immediate medical attention and special treatment needed
    None required. If first aid measures don’t produce relief or discomfort continues, call on medical advice.

Firefighting measures
  • Extinguishing media

    • Suitable extinguishing media: Water, foam,
    • carbon dioxide (CO2) and dry powder Unsuitable extinguishing media: None.
  • Special hazards arising from the substance or mixture
    None.

  • Advice for firefighters
    The unfaced products are non-combustible, some facings may however be combustible. The packaging materials are combustible. In large fires adapt the respiratory protection / breathing apparatus to the surroundings.

Accidental release measures
  • Personal precautions, protective equipment and emergency procedures
    In case of high concentrations of dust, use the personal protective equipment as mentioned in section 8.

  • Environmental precautions
    None.

  • Methods and material for containment and cleaning up
    Put bigger pieces in suitable plastic bags by hand. For small quantities and dust use a suitable vacuum cleaner or sweep up after water spray.

  • Reference to other sections

    • Personal precautions: Section 8
    • Disposal: Section 13.

Handling and storage

  • Precautions for safe handling
    Avoid unnecessary handling of unwrapped product. Use preferably a knife for cutting. If a power tool is used, it must be equipped with efficient air suction. Ensure adequate ventilation of workplace. See also section 8. Do not eat or drink in work areas. In case of sensible skin use protective cream after cleaning.

  • Conditions for safe storage, including any incompatibilities

    • Storage conditions: Store in original packaging; keep dry and protected against mechanical damage. FIFO method is recommended.
    • Incompatible materials: None
    • Packaging: Products are packed in polyethylene film and / or cardboard on wooden or EPS pallets.
  • Specific end use
    Not relevant.

Exposure controls / personal protection

  • Control parameters
    No specific limit values given in the EU. Please respect your national laws and regulations.
    Germany: Common occupational exposure limit for dust (TRGS 900):
    1,25 mg/m³, alveolar
    10 mg/m³, respirable

  • Exposure controls

    • Eye protection:
      Wear goggles when working overhead. Eye protection to EN 166 is recommended.

    • Skin protection:
      Cover exposed skin. When working in unventilated area wear disposable face mask. Use gloves (acc. EN 388) to avoid itching.

    • Respiratory protection:
      When working in unventilated area or during operations which can generate emission of any dust, wear a disposable face mask (FFP1 acc. EN 149). When insulation wool is heated above 150°C for the first time(s), the thermal decomposition of the organic binder starts. Local ventilation should be provided, and if needed wear breathing apparatus. Depending on the service temperature and the installation situation the release of the thermal decomposition gases ends within a few hours /days.

Additional information

The following informations are printed on the packaging of the ISOVER ULTIMATE mineral wool products:

  1. Ventilate working area if possible.
  2. Wear goggles when working overhead.
  3. Clean area using vacuum equipment.KESKO-J0909248-Isover-Ultimate-Mineral-Wool-FIG-1
  4. Cover exposed skin. When working in unventilated area wear disposable face mask.
  5. Waste should be disposed of according to local regulations.
  6. Rinse in cold water before washing.KESKO-J0909248-Isover-Ultimate-Mineral-Wool-FIG-2

Physical and chemical properties

  • Apperance: Elastic body in different shapes, preferably as batts, slabs, rolls, pipe sections or loose wool.
  • Physical state: Solid
  • Colour: Yellow brown
  • Odour: Odourless
  • Odour threshold:  Not applicable
  • pH: Not applicable
  • Melting point: >1000 °C The melting point >1000°C is acc. DIN 4102-17. For long-lasting service at higher temperatures please consider the maximum service temperature of each individual product acc. EN 14303.
  • Initial boiling point: Not applicable
  • Flash point: Not applicable
  • Evaporation rate: Not applicable
  • Flammability: ISOVER ULTIMATE mineral wool is non-combustible acc. EN 13 501 and / or DIN 4102-1, classes A1 and A2. Deviations are possible based on facings, please see individual technical datasheet.
  • Vapour pressure:  Not applicable
  • Relative Density:  10 – 150 kg/m³
  • Solubility (water): Insoluble
  • Auto-ignition temperature:  Not applicable
  • Decomposition temperature: With service temperatures >150 °C the thermal decomposition of the organic binder starts. The mineral fiber itself is stable to higher temperatures (see melting point).
  • Viscosity:  Not applicable
  • Explosive properties:  Not applicable
  • Oxidising properties: Not applicable

Stability and reactivity

  • Reactivity
    None

  • Chemical stability
    Stable under living conditions. With service temperatures >150 °C the thermal decomposition of the organic binder starts

  • Possibility of hazardous reactions
    None under recommended use.

  • Conditions to avoid
    By use below -183°C liquid oxygen may occur inside the ULTIMATE mineral wool. Service temperatures > 150°C For both applications use specific designed products. Consider the regulations and standards for cryogenic and high- temperature use.

  • Incompatible materials
    None

  • Hazardous decomposition products
    None up to service temperatures < 150 °C. Above 150°C the decomposition products are those that would be expected from pyrolysis or burning of any organic material (amongst others CO2, water, ..).

INFORMATION

Toxicological information
  • Information on toxicological effects

    • Acute toxicity: None

    • Skin corrosion/irritation;

    • serious eye damage/irritation;

    • respiratory or skin sensitization: None.
      Mechanical effects on skin, eyes and upper respiratory system (mucous membranes) like itching may occur due to coarse fibres; such symptoms are reversible and temporary.

    • Germ cell mutagenicity;: None

    • Carcinogenicity: None
      ISOVER ULTIMATE mineral wool is exonerated according to German laws Chemikalien-Verbots-Verordnung (Anhang I, Abschnitt 23) and Gefahrstoff- Verordnung (Anhang II, Nr.5) and european Regulation (EC) No 1272/2008 (Annex VI, Nota Q). The compliance with the exoneration criteria is checked regular by Gütegemeinschaft Mineralwolle (RAL Mineralwolle) and by EUCEB (European Certification Board for Mineral Wool Products) (see section 16.).

    • Reproductive toxicity;: None

    • STOT-single exposure: None

    • STOT-repeated exposure: None

    • Aspiration hazard: None

Ecological information
  • Toxicity: None
  • Persistence and degradability: Inert
  • Bioaccumulative potential: None
  • Mobility in soil: None
  • Results of PBT- and vPvB-assessment: No assessment required.
  • Other adverse effects: None

Disposal considerations

Waste treatment methods

  • ULTIMATE mineral wool: Remove and dispose in accordance with local regulations and procedures.
  • Code from the list of waste: 17 06 04, „insulation materials other than those mentioned in 17 06 01 and 17 06 03“ (Commission decision 2014/955/EU)
  • Packaging:
    Germany:
    For professionals the disposal is done by “INTERSEROH Dienstleistungs GmbH”. For households the disposal is done by „Der Grüne Punkt – Duales System Deutschland GmbH“.
Transport information
  • UN-Nummer None
  • UN proper shipping name None
  • Transport hazard classes None
  • Packing group None
  • Environmental hazards None
  • Special precautions for user None
  • Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable
Regulatory information

Safety, health and environmental regulations/legislation specific for the substance or mixture
ISOVER ULTIMATE mineral wool products are articles (REACH, Regulation (EC) No 1907/2006). All components are not classified nor have to be labelled (CLP, regulation (EC) No 1272/2008). So there is no legal enforcement for a material safety data sheet. Although ISOVER uses this format to provide standardized informations.

German water hazard class: Not water-endangering (nicht wassergefährdend) (acc. annex 1, No 1.2a VwVwS issued 27.07.2005)

Chemical safety assessment No assessment required.

Other information

Contact by phone: Cost of calls: 1,49€/minute from German fixed network (cost for mobile network depending on provider and tariff)

Supervision: To ensure that ISOVER glass wool products comply with the exoneration criteria all tests and supervision procedures are carried out by independent, expert qualified institutions.

  • The sign/certificate of „GGM” (Gütegemeinschaft Mineralwolle e.V.; (http://www.ral-mineralwolle.de) identifies the compliance with german laws.
  • The sign/certificate of “EUCEB“ (European Certification Board for Mineral Wool Products; http://www.euceb.org) identifies the compliance with european regulations.

ISOVER ULTIMATE is certified by both boards under glass wool SG-T4.
For use and handling of ISOVER ULTIMATE mineral wool products maufactured before 01.01.1996 please consider (Glaswolle, Steinwolle)“ issued by “BG Bau” April 2015.

This Safe Use Instruction Sheet is based on our current knowledge at the date of issue and is supposed to describe ISOVER ULTIMATE mineral wool insulation products (all types) with regard to safety requirements. It is not meant to guaranty with a legally binding effect the presence/absence of certain properties.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals