CONAIR HS800 8 Volume and Shine Rollers Installation Guide
- June 9, 2024
- ConAir
Table of Contents
CONAIR HS800 8 Volume and Shine Rollers
Product Information
The product is a hair setter that allows you to curl your hair. It has a titanium ceramic thermal layer, an aluminum heating core, and a soft flocking layer. The hair setter comes with a super clip and 8 plastic clips. It also has a high/low/off switch and a Ready Dot. The product has an ionizing function that helps to reduce frizz and enhance shine.
Product Usage Instructions
Before using the hair setter, read all instructions in the user manual. Keep the appliance away from water to avoid electric shock. Never leave the appliance unattended when it is plugged in. Use the appliance only for its intended use and do not use attachments not recommended by Conair.
To curl your hair, place the hair ends on the roller and wind towards the scalp. Roll up hair firmly and secure the roller with a super clip, crossing over the roller. The firmness of the curl depends on the diameter of the roller and the length of time it is left in your hair. For tight, firm curls, use smaller rollers and leave them in the hair for at least 10 minutes before removing them. For soft, wavy curls, use larger rollers and remove them after a shorter period of time.
To remove a roller, hold it in one hand while removing the clip with the other. Gently drop the roller (DO NOT PULL) and let the curl bounce back after the roller has been completely removed. Let it cool for one minute for a firmly set curl, and then style your hair into a look that lasts for hours.
The hair setter has an ionizing function that helps to reduce frizz and enhance shine. After using the hair setter several times, you will find the best roller selection and timing for the texture of your hair and desired results. Allow the hair setter to cool before storing it in a safe, dry location out of reach of children.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER
To reduce the risk of electric shock:
- Always unplug this appliance immediately after using it.
- Do not use it while bathing or in the shower.
- Do not place or store appliances where they can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquids.
- Do not reach for an appliance that has fallen into the water. Unplug immediately.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
- An appliance should never be left unattended when plugged in.
- Do not pull, twist or wrap the line cord around the appliance.
- Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
- Se this appliance only for its intended use as described in the manual. Do not use attachments not recommended by Conair.
- Never operate this appliance if it has a damaged cord or plug if it is not working properly, or if it has been dropped or damaged, or if it has been dropped into water. Return the appli-ance to an authorized service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use it while sleeping.
- Never drop or insert any object into any opening or hose.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- Enter of rollers will be hot – hold rollers by ends to roll hair.
- Se hair setter on a level surface.
- Do not touch the metal radiator strips that hold the rollers – they are hot.
- This appliance is not a toy. Keep away from children.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
How to operate your hair setter:
- lace hair setter on a firm, flat surface. With the lid closed, plug the cord into the outlet. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- hair setter has a slide switch for power control. Slide the switch to your desired setting. The red light will go on and the rollers will heat up quickly. Rollers are ready to use when the ready dots on them turn transparent white (please refer to HOW TO CURL YOUR HAIR for further instructions).
- allow rollers to heat with the lid closed, as this will provide the fastest, most efficient heat-up. Once the rollers reach the appropriate temperature, you can begin setting your hair. For tighter curls, allow rollers to heat longer. Never leave your hair setter on and unattended. Always unplug the hair setter when not in use. Allow the hair setter to cool down after use, and store it in a safe place.
- Hair should be clean and dry or slightly damp – never wet – when setting.
USER MAINTENANCE
Your hair setter is designed for household use and is virtually maintenance- free. This product represents the highest standards of workmanship and engineering research. If cleaning becomes necessary, disconnect the appliance from the power source. Allow the setter to cool. Clean the unit and the heating metal radiator strips with a cloth. (Occasionally, you may want to clean your rollers. Use a damp cloth and mild detergent or soap.) If any abnormal condition occurs, unplug the hair setter, allow it to cool, and return it to an authorized service representative for repair.
STORAGE
Allow the hair setter to cool. Handle the cord carefully to prolong its life;
avoid jerking or straining at plug connections. Place hair setter out of reach
of children in a safe, dry location.
HOW TO CURL YOUR HAIR
- Place ends of the hair on a roller and wind toward the scalp. Roll up hair firmly, and secure the roller with a super clip, crossing over the roller.
- The firmness of the curl is determined by the diameter of the roller, and the length of time the roller is left in your hair.
- For tight, firm curls, use smaller rollers and leave them in the hair for at least 10 minutes before removing them. For soft, wavy curls, use larger rollers and remove rollers after a shorter period of time.
- Removing roller: Hold the roller in one hand while removing the clip with the other. Gently drop the roller (DO NOT PULL) and let the curl bounce back after the roller has been completely removed. Let cool for one minute for a firmly set curl, and then style your hair into a look that lasts for hours.
THE IONIZING FUNCTION
emits negative ions to:
- Neutralize the generally positive charge o flyaway, frizzy hair
- Eliminate the static electricity
- Contribute to shin
NOTE:
The unit may produce a clicking sound at times. This is normal for a high-
output ion generator.
IMPORTANT:
After using the hair setter several times, you will find the best roller
selection and the best timing for the texture of your hair and the results you
desire.
GETTING TO KNOW YOUR HAIR SETTER
- 8 two-inch-diameter jumbo rollers
- 8 easy-to-use plastic clips
SMOOTH WAVES
8-ROLLER HAIR SETTER
- 8 Two-inch Jumbo Rollers
- 8 Plastic Clips
REPLACEMENT PARTS
Model/Description/Price
- RPJFC 10 Plastic Clips $7.75
- RPJFR 3 Jumbo Rollers $6.75
Please add postage and handling to all orders. Postage and handling is as follows: Any Order up to $5.00-add $.50 to the order. For any order from $5.01 to $10.00-add $1.00 to the order. Orders of $10.01 and over add $1.50 to the order.
- Name: __
- Address: ____
- City: ____State: Zip: __
- Daytime Phone: () __
MAIL ORDER TO:
Conair LLC
Service Department 7475 North Glen Harbor Blvd.
Glendale, AZ 85307
WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did
you know that an electrical appliance is still electrically live even if the
switch is off? If the plug is in, the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES
WARRANTY
LIMITED THREE-YEAR WARRANTY (U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 36 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed on the back, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE 36-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
For your safety and continued enjoyment of this product, always read the instruction book carefully before using it.
Please register this product at
www.conair.com/registration.
Service Center
Conair LLC
Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307
©2021 Conair LLC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>