Livoo DOM402 Steam Iron User Manual

Livoo DOM402 Steam Iron

• Reference: DOM402
• Version : 1.5
• Language: English
• WWW.LIVOO.FR

You have purchased a product LIVOO brand and we thank you. We take great care in the design, ergonomics, and ease of use of our products. We hope that this product will give you complete satisfaction.  This instruction manual is available too on our website www.livoo.fr

SAFETY ADVICE

PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE PARTICULARLY BEFORE THE FIRST USE. Misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for which it is designed, and refuse any responsibility as for the damages by incorrect use or bad manipulation.

1. Make sure the power used corresponds with the one indicated on the rating label and the socked has an effective earth connection.
2. Use the iron only for needed use as described in the instruction manual.
3. Do not use this appliance outside
4. Close supervision is necessary when any appliance is used near children.
5. Burns can occur from touching hot metal parts, hot water or steam.
6. Keep the iron out of reach of children.
7. The iron must not be left unattended while it is connected to the supply mains.
8. The iron must be used and rested on a flat, stable surface to avoid any risk of falling. when placing the iron on its stand, ensure that the surface on which the stand is placed is stable;
9. The filling aperture must not be opened during use
10. The plug must be removed from the socket outlet before the water reservoir is filled with water.
11. Unplug the iron from the mains electrical supply :
    • Before cleaning
    • Before filling with water or emptying the water tank
    • Immediately after use
12. Do not pull the cord to unplug the appliance.
13. Never operate the iron with a damaged power cord or plug, or after it has fallen or been damaged in any way. To avoid the risk of electric shock, do not disassemble the iron, take it to a qualified serviceman for examination and repair.
14. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. (*)
15. Do not let the cord touch hot surfaces.
16. The appliance is not intended to be operated by means of an external timer or a separate remote control system.
17. Never use the appliance with the damaged wall socket.
18. The device must be connected to a ground socket.
19. If you use the iron with an extension cord, make sure it has an earthing plug and that it supports the power of the unit. Pay attention that no one gets in the way.
20. To protect against the risk of electrical hazards, do not immerse the iron in water or any other liquid.
21. Do not handle the device or plug it with wet hands.
22. The iron is not to be used if it has been dropped, if there are visible signs of damage, or if it is leaking.
23. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
24. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
25. Only qualified and authorized persons are authorized to carry out repairs to your appliance. Any repairs not in accordance with standards could significantly increase the level of risk for the user!
26. Never add perfume, vinegar, or other chemical liquid to the tank; it can damage the appliance.
27. Risk of burns: The soleplate becomes extremely hot during use. Do not touch it because you could get burned. Be careful when using the steam function as well. it could burn you.
28. This appliance is intended to be used in household and similar applications such as:
    • staff kitchen areas in shops, offices and other working environments
    • farmhouses
    • by clients in hotels, motels, and other residential-type environments

• bed and breakfast-type environments

Competent qualified electrician: after sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case, you should return the appliance to this electrician.

TECHNICAL

• Voltage: AC220-240V 50-60Hz
• Power: 2200W

Surfaces are liable to get hot during use

DESCRIPTION

1. Soleplate
2. Spray nozzle
3. Filling cover
4. Steam and self-clean knob
5. Burst button
6. Spray button
7. Thermostat knob
8. Light
9. Cord guard

CHOICE OF WATER

1. This iron can be used with tap water or ideally distilled or demineralized water.
2. Do not use chemically descaled water or any other liquids for refilling.

HOW TO FILL IN WATER

1. Unplug the iron from the wall outlet, and wait for the iron to cool down.
2. Open the filling cover
3. Fill up to the maximum level “MAX” of the water tank.

TEMPERATURE CONTROL SETTING

1. Always check the garment label for ironing instructions before ironing the garment.
2. If the ironing instructions are missing, then the table below may help you.
3. If the fabric consists of various kinds of fibers (e.g. cotton with polyester) you must always select the ironing temperature for the material with the lowest advised temperature.

SETTING THE TEMPERATURE

1. Insert the plug in the wall socket and stand the iron upright.
2. Turn the temperature button to the desired temperature setting.
3. The desired temperature has been reached when the pilot light has turned off. The pilot light will turn on and off from time to time, indicating that the selected temperature is being maintained.

STEAM IRONING
Steam is regulated by the steam knob moving to the required position.

Warning: the iron gives off steam continuously only if you hold the iron horizontally or by putting steam knob (4) on position. You can stop the continuous steam by placing the iron in a vertical position. As indicated on the thermostat knob, you can only use steam at the highest temperatures. If the selected temperature is too low, water may drip onto the plate.

Continuous steam

• The temperature knob is adjusted to the maximum
• Start the steam switch and move the product
• When the steam switch is turned on, the product remains stationary for 3 seconds and the steam is recovered when the product is moved!

BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles. Press the burst button to generate a powerful burst of steam that can penetrate the fabrics and smooth the most difficult and tough creases. Wait for a few seconds before pressing again By pressing the burst button at intervals you can use also iron vertically (curtains, hung garments, etc.)

Warning: the shot-steam function can only be used at high temperatures. Stop the emission when the plate temperature control light comes on, than start ironing again only after the light has gone off.

DRY IRONING

1. Connect the iron to a suitable mains supply outlet.
2. Ensure that the steam knob (4) is on position .
3. Select the setting with the temperature knob.
4. When the light turns off, the required temperature is reached. The iron is ready for use.

Spray Function
Make sure that there is water in the reservoir. Press the spray button (6) slowly (for a dense spray) or quickly (for a vaporized spray)

ANTI-DRIP SYSTEM
With the anti-drip system, you can perfectly iron even the most delicate fabrics. Always iron these fabrics at low temperatures. In these cases, the Anti-drip system automatically activates to prevent vaporization, so that you can iron the most delicate fabrics without the risk of spoiling or staining them.

SELF-CLEANING
The self-cleaning feature cleans inside the plate, removing impurities. We recommend using it every 10-15 days.

1. Fill the reservoir up to the maximum level indicated and set the steam knob (4)
2. Set the thermostat knob to the maximum temperature and wait for the light to turn off.
3. Hold the iron horizontally over the sink, and move the steam button cursor to the left. Repeat until all the boiling water, steam, and impurities come out.

CARE AND CLEANING

1. Turn the temperature control to MIN, then disconnect the iron from the wall outlet and let it cool down completely.
2. Deposits and other residues on the sole plate can be removed with a cloth soaked in vinegar/water or alcohol solution.
3. The casing may be wiped with a damp cloth and then polished with a dry one.
4. Never use any abrasives to clean the sole plate.
5. Keep the sole plate smooth; avoid contact with metal objects.

Correct disposal of the unit (Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems countries)

The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol of the crossed-out dustbin is marked on all products to remind the obligations of separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.

References

• Livoo, life in feel-good mode

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>