Ruckus Wireless Default Usernames & Passwords Guide

: June 9, 2024
: RUCKUS

Table of Contents

Ruckus Wireless Default Usernames & Passwords Guide
Ruckus Wireless default Password List (Valid April 2023)
- Reset Ruckus Wireless router to default password
REFERENCE LINK
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ruckus Wireless Default Usernames & Passwords Guide

The default credentials needed to login to your Ruckus Wireless router The majority of Ruckus Wireless routers have a default username of super, a default password of sp-admin, and a default IP address of 192.168.0.1. These Ruckus Wireless credentials are needed when doing log in to the Ruckus Wireless router’s web interface to change any settings. Since some of the models don’t follow the standards, you can see those in the table below. Below the table are also instructions on what to do in case you forget your Ruckus Wireless router password, need to reset your Ruckus Wireless router to its factory default password, or the password reset doesn’t work. Tip: Press ctrl+f (or cmd+f on Mac) to quickly search for your model number.

Ruckus Wireless default Password List (Valid April 2023)

Model| | Default Username

Default Password| Default IP address
M510
M510 default factory settings| super| sp-admin| 192.168.0.1
MediaFlex 2111 (VF2111)
MediaFlex 2111 (VF2111) default factory settings| admin| password| | 192.168.0.254

Forgot your Ruckus Wireless router password? Have you changed the username and/or password of your Ruckus Wireless router and forgotten what you changed it to? Don’t worry: all Ruckus Wireless routers come with a default factory-set password that you can revert to by following the instructions below.

Reset Ruckus Wireless router to default password

If you decide to revert your Ruckus Wireless router to its factory defaults, you should do the 30-30-30 reset as follows:

When your Ruckus Wireless router is powered on, press and hold the reset button for 30 seconds.
While still holding the reset button pressed, unplug the power of the router and hold the reset button for another 30 seconds
while still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds. Your Ruckus Wireless router should now be reset to its brand-new factory settings, Check the table to see what those are (Most likely super/sp-admin). If the factory reset didn’t work, check out the Ruckus Wireless 30 30 30 factory reset guide.

Important: Remember to change the default username and password to increase the security of your router after the factory reset, as the default passwords are available all over the web (like here).

I still can’t access my Ruckus Wireless router with the default password
make sure that you have followed the reset instructions correctly as the Ruckus Wireless routers should always revert to their factory default settings when reset. Otherwise, there is always the risk that your router is damaged and might need to be repaired or replaced.