V-TAC VT-6069 LED Panel Instruction Manual
- June 9, 2024
- V TAC
Table of Contents
V-TAC VT-6069 LED Panel
Product Information
LED Panel
The LED Panel model VT-6069 is a square-shaped panel that has a power
consumption of 36W and provides 3100LM of useful lumens. The panel has a beam
angle and CRI rating that is not mentioned in the manual. The panel has a
Power Factor (PF) and IP range, which is also not mentioned in the manual. The
panel can be turned on and off for multiple cycles and has a long life
operation temperature. The input power and dimensions of the panel are not
mentioned in the manual.
Product Usage Instructions:
- Step 1: Ensure that the LED panel is mounted securely on the ceiling or wall.
- Step 2: Connect the input power supply to the LED panel.
- Step 3: Turn on the LED panel using the On/Off switch.
- Step 4: Adjust the brightness of the panel if possible using a dimmer switch or remote control.
- Step 5: To turn off the panel, use the On/Off switch or the dimmer switch or remote control if applicable.
- Step 6: In case of any issues or defects, refer to the warranty information provided in the manual.
Note: It is recommended to read the entire user manual before using the LED panel to ensure safe and proper usage.
TECHNICAL DATA
- Model VT-6069
- Shape Square
- Watts 36W
- Lumens 3100LM (Useful Lumens)
- BeamAngle 90°
- CRI >80
- PF >0.9
- IP Rating IP20
- On/Off Cycle >15,000
- Long Life 25,000 Hours
- Operation Temperature -20°C to +40°C
- Input Power DC: 30-42V
- Dimension 620x620x13mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Installation should only be done by a certified electrician.
- For Indoor use only
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
- Luminaires not suitable for covering with thermally insulating material.
Note: The panel works on DC 30-42V, please connect correctly with the
conductor before connecting the conductor to the power supply main.
‘This product contains a light source of energy efficiency class
INSTALLATION DIAGRAM
- Make a hole into the ceiling.
- Fix the panel into the ceiling.
- Wire the DC cable of the panel to the driver and then wire the AC source cable to the power supply.
- Turn on the switch, test the fixture light on.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>