FIAT PROFESSIONAL F1-1600W High Pressure Washer User Manual

F1-1600W High Pressure Washer

High Pressure Washer User Manual

This high pressure washer is a powerful cleaning tool designed for home and commercial use. Please read this user manual carefully before using it to ensure safe and effective usage. Keep the manual for future reference since it contains important information.

Please read this user manual carefully to fully understand the usage of your purchase. Keep the manual for future reference since it contains important information.

Safety Instructions

• This appliance is not intended for use by children or unassisted, unsupervised, person whose physical, sensory or mental capabilities prevent them from using it safely. Children must be supervised by adults to ensure they do not play with the appliance.
• Before starting up your machine, carefully check the integrity/defectiveness of the product. If you find any, do not start up your machine.
• Visitors and pets must be kept at a safe distance from the work and spray area.
• Do not use the appliance for any job outside its intended purpose.
• Do not wear loose clothing or jewelry. They can be carelessly taken during the movements of the parties. Protective rubber gloves, non-slip footwear, protective goggles are recommended during use.
• Watch what you are doing. Use common sense. Do not use the device when you are tired, or under the influence of alcohol or drugs.
• Do not move or pull the appliance without disconnecting the plug from the socket. Do not pull the device through the gun handle. Make sure that the switch is in the zero Off position before inserting the plug into the electrical socket.
• Do not move or pull the appliance through the cable, do not yank it to remove it from the electrical socket. Keep the cable away from sources of heat, oil or gasoline, sharp edges.
• Never store the appliance outdoors or at risk of freezing. The device can be seriously damaged and compromise safety.
• The high pressure jet can be dangerous if used improperly. The jet must not be directed against people, animals, connections or electrical panels, the pressure washer itself, pneumatic valves.
• Do not spray flammable products.
• If you use electrical extension cables, the plug and socket must be watertight.
• he operating temperature of use must be between 0’C (32’F) and 40’C (104’F).

Parts Description

1. Safety lock
2. Trigger
3. Trigger gun
4. Spray wand
5. Adjustable quick-connect nozzle
6. High Pressure Hose
7. Transportation Handle
8. Trigger gun holder
9. Spray wand holder
10. Removable detergent tank
11. Power cord.
12. Water outlet
13. On/off switch
14. Garden hose adaptor
15. Water inlet connector

Carefully remove the pressure washer and check if all the above-mentioned contents are present in the packaging. 2. Inspect the product carefully to verify that no transport damage or breakages are present. If you find any type of damaged or missing part DO NOT return the product, please contact your seller.

Assembly Instructions

1. Place the pressure washer near the water source. The pressure washer must be used on a safe, stable, not inclined, vertical position. (see fig 1.)
2. Insert the handle into position until you hear a “click” (fig.2).
3. Engage the extension on the gun and rotate until it fits completely. Pulling the extension must not come out of the gun (fig.3).
4. Connect the high pressure hose to the spray gun by pressing the lever and releasing it when it fits (fig. 4).
5. Connect the high pressure hose to the pump outlet (fig. 5).
6. Connect the female adapter of the garden hose to the male at the pump inlet (fig. 6). The garden hose must be at least 13mm (1/2 in.) Inside diameter and reinforced type. The water flow rate must be at least 1.5 times the pump flow rate.
7. Connect the garden hose to the tap (fig. 7)
8. Make sure that the switch is in the OFF position (0) before connecting the plug to the power socket (fig.9).
9. Insert the nozzle in the extension. Once inserted, the red button must return to the raised position (fig. 10).
10. To disconnect the high pressure nozzle from the extension: Turn off the pressure washer (switch 0 / OFF), close the inlet water supply, pull the gun lever to discharge the residual pressure. Remove the nozzle by pressing the red button and pulling outwards.

WORKING WITH DETERGENTS

When cleaning with the pressure washer, some tasks can be accomplished with water only. Others require the use of detergent for more effective cleaning. Use only detergents suitable for high pressure washers. DO NOT USE household cleaners, acids, alkaline solutions, solvents, bleach, flammable liquids, solutions for industrial use. Many detergents may require dilution before use. Prepare the solution as per the instructions on the bottle.

1. Fill the bottle with the detergent, max 300ml (Fig. 11).

Usage Instructions

1. Connect the high-pressure hose to the unit’s water outlet.
2. Connect the spray wand to the high-pressure hose.
3. Insert the detergent hose into the detergent tank.
4. Connect the garden hose to the water inlet connector.
5. Plug the power cord into an electrical socket.
6. Turn on the water source.
7. Press the on/off switch to turn on the pressure washer.
8. Point the spray wand at the surface to be cleaned and squeeze the trigger to start spraying.
9. To stop spraying, release the trigger.
10. When finished using the pressure washer, turn it off and unplug it from the electrical socket.
11. Disconnect all hoses and store them properly.

With proper usage and maintenance, your high pressure washer should provide years of reliable service. If you encounter any problems or have questions, please contact your seller or customer support.

Never use: Bleach, chlorine products, and other corrosive products liquids containing solvents (e.g. paint thinners, petrol, oils) , Sodium phosphate ,Ammonia or Acid-based products. These products damage the appliance, accessories and/or surfaces.

SHUTTING DOWN THE DEVICE

1. Turn off the switch and remove the plug from the socket.
2. Close the inlet water.
3. Pull the gun lever to relieve residual pressure two or three times.
4. Disconnect the water inlet hose
5.  Disconnect the high pressure hose from the pressure washer and gun.
6. Activate the safety lever locking device.

MAINTENANCE

Before working on the pressure washer, disconnect the plug from the power socket. To ensure good performance, check and clean the water inlet filter (fig. 14). Remove the filter and rinse with hot water to prevent any foreign parts from entering the pump.

SPECIFICATIONS

• Product size: 63.5 x 25.3 x 22.1 cm
• Product weight: 5.0 kg
• Voltage: 230~240 v
• Frequency: 50/60 hz
• Motor: 1600 watt
• Max. water temperature: 40 degrees celsius
• Working pressure: 100 – 135 bar
• Hose length: 500 cm
• Cable lengt: 500 cm

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>