Champion-First Electronics Ltd GC-845S Motherboard Owner’s Manual

June 9, 2024
Champion-First Electronics Ltd

Champion-First Electronics Ltd GC-845S Motherboard

Champion-First-Electronics-Ltd-GC-845S-Motherboard-
fig-1

Product Information

Product Usage Instructions

  • Before using the GC-845S motherboard, ensure that it is compatible with your Pentium 4 Processor.
  • To install the motherboard, follow these steps:
    1. Ensure that all power sources are turned off and disconnected.
    2. Remove the computer case cover to access the internal components.
    3. Locate the existing motherboard and remove it from the computer case.
    4. Align the GC-845S motherboard with the screw holes in the computer case and secure it in place using screws.
    5. Connect all necessary components to the motherboard, including the CPU, RAM, and hard drive.
    6. Replace the computer case cover and reconnect all power sources.
    7. Power on the computer and follow the on-screen instructions to install any necessary drivers or software.
  • If you encounter any issues during installation or usage of the GC-845S motherboard, contact Champion-First for further assistance
    at info@champion-first.com.

Specification

Designed for Pentium 4 Processor by using Intel Chipset

  • Support Intel Pentium 4 and Northwood Processor on Socket 478
  • Support 400MHz Processor Front-side Bus
  • Intel 82845/82801BA Chipset
  • Full Software Configurable: CPU PnP and full jumper less
  • Keyboard and PS/2 Mouse Wakeup
  • Modem Ring Wakeup with External Modem
  • Interface Header to Support Wake-On-LAN Enabled Ethernet Card
  • Three DIMM slots supporting up to 3GB Memory Capacity
  • Support 133MHz PC133 SDRAM DIMM
  • Suspend-to-RAM Technology to support Instant ON
  • AGP 2.0 Compliant Slot Supporting 4x Mode to get 266MHz Graphics Bandwidth
  • 1x AGP slot, 5x PCI slots, 1x CNR slot shared with 1x AMR slot
  • 1x FDD port, 1x LPT port, 2x COM ports
  • 4x USB ports, 1x PS/2 mouse port, 1x IrDA port
  • Dual IDE channels supporting four Ultra ATA33/66/100 IDE devices
  • System Health Monitoring with Win95/98/Me/NT/2000 Support
  • AMI Flash BIOS, PC99/ACPI/DMI Compliant
  • ATX Format, 305mm x 170mm PCB
  • Integrated AC97 Audio Onboard
  • AC97 2.1 Compliant Codec with 3D Stereo Enhancement
  • Complete Driver Support for Win95/98/Me/NT/2000
  • 1x Line-out, 1x Line-in, 1x Mic-in
  • 1x CD-in, 1x AUX-in, 1x Telephony Port, 1x Game Port

ABOUT COMPANY

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals