NETGEAR WAG511 Network Card Installation Guide
- June 9, 2024
- NETGEAR
Table of Contents
NETGEAR WAG511 Network Card
NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511
These setup instructions assume you will connect to an access point or
wireless router. See the online help and the NETGEAR Dual Band Wireless PC
Card 32-bit CardBus WAG511 User Manual on your CD for wireless security or
advanced options.
Estimated Completion Time: 5-15 minutes.
Minimum System Requirements
Before installation, make sure that your computer has the following:
- A 32-bit CardBus slot.
- Microsoft Vista, Windows XP, or Windows 2000. Some versions of Windows will ask for the Windows Installation CD during installation.
- At least 5 Megabytes of disk space.
Installation
- First, install the WAG511 software.
Insert the NETGEAR CD. If the CD main page does not appear, double-click Autorun.exe on the CD.
- Click Install Driver & Utility.
- The InstallShield wizard screen opens.
- Follow the wizard prompts to install the Smart Wizard Wireless Utility. When the Installation Complete message appears, click Finish.
Next, install the WAG511 Wireless PC Card.
- Hold the PC Card with the NETGEAR logo facing up and insert it into a CardBus slot. After a short delay, the Found New Hardware Wizard displays.
Note
If a Windows XP logo testing warning appears, click Continue Anyway to
proceed.
-
Follow the Found New Hardware Wizard prompts, and click Finish when done.
-
Windows 2000 users go to Step 3. Windows XP or Vista users can set up the wireless adapter with the NETGEAR Smart Wireless Settings Utility
(recommended) or the Windows configuration utilities.- NETGEAR Smart Wireless Settings Utility: Reveals more information about each network and makes it easier to troubleshoot network connection problems.
- Windows configuration utilities: See the Windows documentation or
“Using Windows XP and Vista Wireless Configuration Utilities” at: http://documentation.netgear.com/reference/enu/winzerocfg/index.htm
-
Click Next to accept the NETGEAR Smart Wireless Settings Utility.
Now, configure the WAG511 and save the Profile
-
Click the WAG511 icon in the Windows system tray to open the Smart Wireless Settings Utility on the Settings tab page.
-
Enter your network settings.
Tip
To view the available wireless networks, use the drop-down list or the Networks tab and choose the one you want. -
Click Apply to activate the connection.
Verify your wireless connection
You can use the Status bar and the WAG511 LEDs to verify your wireless
connection.
Status Bar
The status bar is located at the bottom of the Settings page.
WAG511 LEDs
Check the WAG511 LEDs:
- Both blinking alternately means attempting to connect
- Both blinking together indicates a good connection (fast blinking means data transmission).
- Off means the card is not plugged in.
Technical Support
Thank you for selecting NETGEAR products.
After completing the Smart Wizard configuration assistant, locate the serial
number on the bottom label of your product and use it to register your product
at
http://www.NETGEAR.com/register
Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product.
Go to http://kbserver.netgear.com for product updates and web support.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.
© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.
Frequently Asked Questions
What is the maximum wireless data transfer speed of the NETGEAR WAG511 network card?
The maximum wireless data transfer speed of the NETGEAR WAG511 network card is up to 108 Mbps.
What type of wireless security protocols does the NETGEAR WAG511 support?
The NETGEAR WAG511 supports WEP, WPA-PSK, WPA2-PSK, and 802.1x wireless security protocols.
What operating systems are compatible with the NETGEAR WAG511 network card?
The NETGEAR WAG511 network card is compatible with Windows 2000, Windows XP, and Windows Vista.
What type of wireless network does the NETGEAR WAG511 support?
The NETGEAR WAG511 supports 802.11a/b/g wireless networks.
Is the NETGEAR WAG511 network card compatible with PCI Express slots?
No, the NETGEAR WAG511 network card is not compatible with PCI Express slots. It is designed for standard PCI slots.
What is the maximum range of the NETGEAR WAG511 network card?
The maximum range of the NETGEAR WAG511 network card depends on the environment and obstacles, but it is typically up to 300 feet indoors and up to 1500 feet outdoors.
Does the NETGEAR WAG511 network card support WMM (Wi-Fi Multimedia) technology?
Yes, the NETGEAR WAG511 network card supports WMM (Wi-Fi Multimedia) technology, which provides better quality of service for audio, video, and voice applications.
Is the NETGEAR WAG511 network card compatible with Mac OS?
No, the NETGEAR WAG511 network card is not compatible with Mac OS. It is designed to work with Windows operating systems only.
Does the NETGEAR WAG511 network card support multiple input and output (MIMO) technologies?
No, the NETGEAR WAG511 network card does not support multiple input and output (MIMO) technologies. It is a single-stream (1×1) wireless network card.
Does the NETGEAR WAG511 network card come with an external antenna?
Yes, the NETGEAR WAG511 network card comes with a detachable external antenna that can be replaced with a higher-gain antenna for better range and performance.
Download PDF Link : NETGEAR WAG511 Network Card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>