CAMBRIDGE AUDIO AXN10 Network Streamer Player User Manual

: June 9, 2024
: Cambridge Audio

CAMBRIDGE AUDIO AXN10 Network Streamer Player

AXN10 Network Streamer Player
User Manual

AXN10

Last updated: February 2, 2023 03:20. Revision #8837

CAMBRIDGE AUDIO AXN10 Network Streamer Player - AXN10

Introduction

Last updated: February 3, 2023 09:11. Revision #8855
This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of publishing; however, Cambridge Audio’s policy is one of continuous improvement, therefore design and speciﬁcations are subject to change without prior notice.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. All trademarks and registered trademarks are the property of their respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Audio Partnership Plc is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission.
aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd.
StreamMagic is a trademark of Audio Partnership Plc and is registered in the European Community and other countries.
This product contains software licensed under version 2 of the GNU Public License and version 2.1 of the GNU Lesser Public License. The source code for this software is available from: http://gpl.stream-magic.com/
This product includes technology owned by Microsoft Corporation and under a licence from Microsoft Licensing GP. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft Corporation and/or Microsoft Licensing, GP as applicable.
The Spotify software is subject to third party licenses found here: www.spotify.com/connect/third-party- licenses.
This product support AirPlay 2 and requires iOS 11.4 or later.
Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
Use of the Works with Apple badge means that an accessory has been designed to work speciﬁcally with the technology identiﬁed in the badge and has been certiﬁed by the developer to meet Apple performance standards.
Android, Google Play and the Chromecast built-in logo are trademarks of Google Inc.
TIDAL and TIDAL logo are registered trademark of Aspiro AB in the European Union and other countries.
MQA and the Sound Wave Device are registered trade marks of MQA Limited © 2016.
© Copyright Cambridge Audio Ltd
For upcoming news on future products, software updates and exclusive oﬀers, make sure you register your product at https://www.cambridgeaudio.com/register

What’s included with the AXN10?

Last updated: February 2, 2023 03:20. Revision #8838
Inside the box of your AXN10 you will receive:

CAMBRIDGE AUDIO AXN10 Network Streamer Player - Whats
included

WiFi/BT Antenna (x2)
AXN10 player
Safety guide
Quick start guide
Regional mains lead

Front panel controls

Last updated: February 2, 2023 03:20. Revision #8839

CAMBRIDGE AUDIO AXN10 Network Streamer Player - Front
panel

Power button
Switches the unit between Standby Mode (indicated by dim power LED) and On (indicated by bright power LED). Standby Mode is a low power mode (0.5 Watts) – This can only be achieved when using Eco mode. The unit should be left in Standby Mode when not in use.
Network state LED
See LED Descriptions page for descriptions of the colours and ﬂashing states
Preset buttons
Used to access and store presets, for more information on what can be stored as a preset please see the Presets section on the Home tab in the StreamMagic app.

If the currently playing media can be stored as a preset, long pressing the preset button will store the preset

LED descriptions

Last updated: January 31, 2023 03:17. Revision #8840
LED Colour

Mode	Colour

Rear panel connections

Last updated: February 2, 2023 03:20. Revision #8827

CAMBRIDGE AUDIO AXN10 Network Streamer Player - Rear
panel

Line output.
Fixed level analogue output used to provide a signal to an integrated ampliﬁer, pre-amp or recording device.
S/P DIF coaxial digital output.
TOSLINK digital output.
WiFi and Bluetooth antenna
Ensure both antennas are connected securely before use.
Service port.
For servicing use only.
Connecting any other device here may result in damage.
USB Socket
Connection for a USB ﬂash drives.
The USB port is not intended for connection to Apple mobile devices, no functionality, charging or otherwise, is supported.
Ethernet
Use to connect the AXN10 directly to a router.
WiFi antenna
AC Power Socket
Once you have completed all connections to the ampliﬁer, plug the AC power cable into an appropriate mains socket then switch on.

Getting connected

Last updated: February 2, 2023 03:20. Revision #8828
Basic connections
The diagram below shows the basic connection of your AXN10 to an AXA35.

CAMBRIDGE AUDIO AXN10 Network Streamer Player - Basic
connections

Connecting to WiFi
Important Note: It is vitally important that your AXN10 remains connected to a Wi-Fi network as often as possible. This will ensure that the unit is regularly updated to meet essential security protocols, third party compatibility and the latest software requirements.
Failure to maintain your device with regular ﬁrmware updates as provided by Cambridge Audio will void the product warranty and is likely to cause major issues to the unit in time. Please ensure that your unit is updated to the most current ﬁrmware version. Information on the latest ﬁrmware version for the AXN10 can be found here.
Note: The AXN10 is not compatible with captive portal networks. The AXN10 can connect to 2.4GHz/5GHz WiFi networks

CAMBRIDGE AUDIO AXN10 Network Streamer Player - Basic connections
2

StreamMagic app – Setup

Last updated: February 7, 2022 03:44. Revision #8833
Your player is network connected, not only can you listen to devices connected to the inputs on the product but you can also stream music from many diﬀerent sources both on your home network and from the internet.
To set up your player, please ﬁrst download the StreamMagic app from the Apple app store or Google Play store.

CAMBRIDGE AUDIO AXN10 Network Streamer Player - StreamMagic
app

Set up

Switch on your player and follow the on screen instructions to select your preferred language.
Open the StreamMagic app and follow the instructions provided to complete setting up your player on your network. This process will also apply any new updates that may be pending.

Note: During the set up process you will be asked to give your player a name, please make sure this is unique to your player. This will make it easier to ﬁnd when using streaming and smart home services.
Once your player is connected to your home network you’ll have full control of your sources, including internet radio, streaming services, network and USB drives and more.
For more information on our StreamMagic app, please visit: https://www.cambridgeaudio.com/streammagic

Google Home / Chromecast built-in

Last updated: January 24, 2022 03:01. Revision #8832
Your player is network connected, not only can you listen to devices connected to the inputs on the product but you can also stream music from many diﬀerent sources both on your home network and from the internet.
Your player features Chromecast built-in and can be incorporated in to your Google Home. To set up your player, download the Google Home app on your smart phone or tablet.

CAMBRIDGE AUDIO AXN10 Network Streamer Player - StreamMagic
app

With Chromecast built into your player, your phone becomes your remote. Simply tap the Cast button from apps you already know and love to stream music, podcasts and playlists from your phone, tablet or laptop to your player.

Chromecast built-in
Your phone is your remote

Simply tap the Cast button from apps you already know and love. No new logins or downloads required.
Use your phone to search, play, pause and turn up the volume from anywhere in the home.
While you’re streaming, you can keep using your phone for other things – scroll through social media, send a text, and even accept calls.
Enjoy music throughout your house when you use multi-room casting with Chromecast-enabled speakers.
Just say “Hey Google” to cast to your player

Unlimited entertainment, all on your schedule

Works with hundreds of apps and new apps are being added all the time.
Choose from millions of songs from popular music services like Pandora, Spotify, and Youtube Music.

Android, Google Play and the Chromecast built-in logo are trademarks of Google Inc.

Internet radio

Last updated: January 5, 2023 12:41. Revision #8751
You can assign up to 99 of your favourite Internet Radio stations as presets on your player, which can then be recalled using the StreamMagic app or a remote control if your player includes one
You can search and assign a preset via the StreamMagic app:

Within the StreamMagic app navigate to the Radio tab.
Use the Search for Radio search tab at the top of the page or enter a Custom URL link by selecting URL.
Once you have located the station you wish to store, select and you will be prompted with the option to Play now or Add to presets.
Add station to the desired preset for your player between 1-99.
You will then receive conﬁrmation that the station is saved to the chosen preset.

Note: Please ensure that the custom URL stream is one of the following supported ﬁle types: ALAC, WAV, FLAC, AIFF, DSD (x256), WMA, MP3, AAC, HE AAC AAC+, OGG Vorbis.
To remove a preset (iOS):

Within the StreamMagic app navigate to the Home tab.
Scroll to the bottom of the page where you ﬁnd your players Presets, and select EDIT.
To remove station from preset, tap the red circle icon and then press Delete.

To remove a preset (Android):

Within the StreamMagic app navigate to the Home tab.
Scroll to the bottom of the page where you ﬁnd your players Presets, and select EDIT.
Tap on the station you wish to remove.

Note: You may also assign a preset using a remote control, by pressing and holding a number on the remote whilst a station is playing.

AirPlay

Last updated: November 30, 2022 11:02. Revision #8831
AirPlay is an Apple technology designed to control home audio systems and speakers in any room — with a tap or by just asking Siri — right from iPhone, iPad, HomePod, or Apple TV. Play a song in the living room and kitchen at the same time or adjust the volume in any room, all in sync.
After installing your player, add it to the Apple Home app with a few simple steps using your iPhone or iPad
How to use AirPlay from iPhone or iPad

Ensure your player is connected to your network.
Open the app that you want to AirPlay from.
Tap or .
Select your player as your AirPlay device.

How to use AirPlay from Control Center
To switch the audio on your device from Control Center:
Swipe down from the top right side of the screen on your device to open Control Center.
Touch and hold in the upper-right corner, then select your player.
This product supports AirPlay 2 and requires iOS 11.4 or later.
Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
Use of the Works with Apple badge means that an accessory has been designed to work speciﬁcally with the technology identiﬁed in the badge and has been certiﬁed by the developer to meet Apple performance standards.

Built-in streaming services

Last updated: November 2, 2022 09:55. Revision #8759
Your player has the following built-in streaming services:
Spotify Connect
TIDAL
Qobuz
Deezer
Note: It is essential that the device you are streaming from (smartphone, tablet, computer, etc.) is on the same Wi-Fi network as your player, to ensure that the units can communicate with each other.

Spotify Connect
Use your phone, tablet or computer as a remote control for Spotify.
Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party- licenses

TIDAL (Connect)

Open the TIDAL app and choose the playlist, album, song, etc. that you wish to stream to your player.
Select the Sound Output devices icon within TIDAL and select your player from the list.
TIDAL Connect should now be streaming your chosen content to your player.
Go to tidal.com/connect to learn more

TIDAL (via StreamMagic)

Open the StreamMagic app and navigate to the Library tab, and then select TIDAL.
Note: Please ensure that you sign into your TIDAL account when prompted to do so. This will only be required on the ﬁrst instance of use to link the account to the treamMagic app.
Choose the playlist, album, song, etc. that you wish to stream to your player.
TIDAL should now be streaming your chosen content to your player.

Qobuz (via Chromecast)

Open the Qobuz app and choose the playlist, album, song, etc. that you wish to stream to your player.
Select the Qobuz Connect icon within Qobuz and select your player from the list.
Qobuz should now be casting your chosen content to your player.

Qobuz (via StreamMagic)

Open the StreamMagic app and navigate to the Library tab, and then select Qobuz.
Note: Please ensure that you sign into your Qobuz account when prompted to do so. This will only be required on the ﬁrst instance of use to link the account to the treamMagic app.
Choose the playlist, album, song, etc. that you wish to stream to your player.
Qobuz should now be streaming your chosen content to your player.

Deezer (via Chromecast)

Open the Deezer app and choose the playlist, album, song, etc. that you wish to stream to your player.
Select the speaker icon within Deezer, then select ‘Google Cast’. Select your player from the list.
Deezer should now be casting your chosen content to your player.

**Deezer (via StreamMagic)***

Open the StreamMagic app and navigate to the Library tab, and then select Deezer.
Note: Please ensure that you sign into your Deezer account when prompted to do so. This will only be required on the ﬁrst instance of use to link the account to the StreamMagic app.
Choose the playlist, album, song, etc. that you wish to stream to your player.
Deezer should now be streaming your chosen content to your player.

*Deezer is only available within the StreamMagic app when running ﬁrmware version 129-b-004 or later and StreamMagic app version 2.9.0 or later.

Bluetooth

Last updated: February 7, 2023 04:16. Revision #8869
The Bluetooth source allows your player to receive wireless Bluetooth audio from most phones, tablets and laptops.
Pairing
To begin streaming high-quality music from your chosen media source it will ﬁrst need to be paired with your player.

Use the “Edit” option of the source to add a Bluetooth source.
Within the StreamMagic App navigate to the Home tab
Return to the Home tab and select the Bluetooth source.
Open your mobile device or laptops Bluetooth settings
Select your player from the list of available devices
Your device should now connect to your player

Once paired you should be able to connect to your player at any time by selecting the Bluetooth source on your player and then choosing your player from the list of previously connected devices.
Notes:
Your Bluetooth device can only be connected to your player while the Bluetooth source is selected.

USB Media

Last updated: December 7, 2022 05:20. Revision #8852
You may connect a USB SSD, USB HDD or ﬂash drive to your player via the USB Media inputs located on the rear of the unit for playback. Once connected the following formats are supported: ALAC, WAV, FLAC, AIFF, DSD (x512), WMA, MP3, AAC, HE AAC, AAC+, OGG Vorbis
Note: your player will read large capacity hard drives connected to their USB inputs. However, some larger capacity drives will require you to use their own power supply.
Your player only supports USB hard drives which are formatted to FAT32 and NTFS.
The primary function of your player is as a network music player. The USB ports are intended for convenient connection of USB thumb drives. As such, we cannot guarantee compatibility with all USB HDD’s.
USB Media Playback (via StreamMagic app)

Connect USB SSD, HDD or ﬂash drive to rear panel USB Input.
Navigate to the Library tab of the StreamMagic app.
Under USB Drives, locate your USB Media device and open.
Upon selecting a track you will have the option to ‘PLAY FROM HERE’, ‘PLAY TRACK NOW’, ‘PLAY TRACK NEXT’ or ‘QUEUE TRACK’.

Streaming Your Local Digital Music Collection

Last updated: February 2, 2023 03:17. Revision #8853
Your player can play content from many diﬀerent physical sources and this section will explain what you need to do to access and play your locally stored digital music collection. ‘Locally Stored’ means the digital music ﬁles you have on your PC, Mac or Network Attached Storage devices (NAS).
To stream local content, you will need the following hardware and software running in your network:

Your Cambridge Audio Network Player.
A mobile device such as a smartphone or tablet on which you can run the StreamMagic app.
A hard drive, computer or NAS containing your compatible digital music ﬁles.
An active UPnP music or media server.
A router which is conﬁgured to allow the UPnP service.

Note: The above items must be correctly connected and conﬁgured, and it is important to note that depending on the server, NAS, computer, etc. you’re using this will diﬀer from setup to setup. To help you with this we have created best practice guide which should get you up and running with minimal fuss and eﬀort. This can be found here.

Settings

Last updated: February 2, 2023 03:17. Revision #8854
Device Name
This is how your player will appear in your StreamMagic app and on your home network when using services like Spotify, Chromecast built-in and TIDAL Connect.
Giving your player a unique name makes it easier to distinguish when using streaming and smart home services.
AirPlay Name
This is how your player will appear when using AirPlay or the Apple Home app.
Standby Mode
This selects what type of standby mode your player will use.
Network Standby means your player will still be controllable by the StreamMagic app and other network services.
If Eco mode is chosen your player will use even less power in standby but will need to be switched on either by the front panel or the remote control.
Automatic Power Down
This sets how long your player will wait while inactive before switching in to standby.
Roon Ready DSD
This will allow you to choose how Roon provides DSD content.
Use DoP for digital output – If your device does support native DSD in DoP format.
Use PCM for digital output – If your device doesn’t support native DSD.
Early Update
Setting this to ‘On’ will let you try out the latest ﬁrmware ahead of general release.
For more information and to ﬁnd out what’s new visit our FAQ.
Firmware
This will check for and apply any new ﬁrmware available for your player.
When left in network standby overnight your player will check and apply any new updates.
Factory Reset
This will return your player to its factory settings.
You can also do this manually by following the steps below:

Remove the mains power lead
Hold the standby button while re-applying the power lead
The LED will ﬂash red while the factory reset process completes
The player will reboot

Note: Your network player must be connected to the internet to carry out ﬁrmware updates. It is recommended that you keep your network player connected to ensure optimal performance.

Technical Speciﬁcations

Last updated: February 2, 2023 03:20. Revision #8795
Inputs
Ethernet, USB host (mass storage), Wi-Fi, Bluetooth
Outputs
Line out (unbalanced), Digital out (Coax and Optical)
DAC
ESS Sabre ES9033Q
Frequency response
20Hz – 70kHz +0/-1dB
THD+N 0dBFS, 1khz, 20k BW
<0.001%
S/N Ratio (20k BW)

110dB
RCA output level
2Vrms +/-10%
RCA output Impedance
500Ohm
Ethernet
IEEE 802.3 10 Base-T or 100 Base-T
Wi-Fi
Wi-Fi 5 dual band 2.4/5gHz
WPA2/WPA2-PSK
Bluetooth
5.0 A2DP/AVRCP supporting SBC and AAC
Compatibility
UPnP, Local USB media, Chromecast built-in, Spotify connect, Tidal, Qobuz, RoonReady, Airplay2, Amazon Music
Audio formats
ALAC, WAV, FLAC, AIFF, DSD (x512), WMA, MP3, AAC, HE AAC, AAC+, OGG Vorbis, HLS/DASH,.m3u, .pls playlists
USB File system support
FAT32, NTFS, ext3/4, ExFAT
Hi-res support
Up to 768KHz 32bit PCM, up to DSD512
Mains Voltage
100-240V ~50/60Hz
Max Power consumption
20W
Standby power consumption
<0.5W
Dimensions (H x W x D)
75 x 430 x 305mm
Weight
3.5kg

Troubleshooting

Last updated: February 2, 2023 03:20. Revision #8796
If you have trouble connecting the AXN10 to your network, these steps may help to resolve the problem:

Ensure that both of the supplied Wi-Fi antennas are securely connected.
Conﬁrm that a connected computer can access the Internet (i.e. can browse the web) using the same network.
If you have an encrypted Wi-Fi network, check that you have entered the correct key or passphrase. Remember that text-format keys are case-sensitive.

If your AXN10 can connect to the network successfully but is unable to play particular Internet Radio stations, it may be due to one of the following causes:

The station is not broadcasting at this time of the day (remember it may be located in a diﬀerent time zone).
The station has reached the maximum allowed number of simultaneous listeners.
The station is not broadcasting anymore.
The Internet connection between the server (often located in a diﬀerent country) and you is too slow.

If you have trouble connecting the StreamMagic app to the AXN10, these steps may help to resolve the problem:

Ensure that both of the supplied Wi-Fi antennas are securely connected.
Ensure that your mobile device and the AXN10 are connected to the same network.
Ensure that you have allowed the StreamMagic app to have access to devices on your network, via your mobile devices’ app settings.
Check whether any VPN or Anti-Virus app downloaded on to your mobile device may be preventing the StreamMagic app from ‘seeing’ the AXN.

If you have problems with UPnP playback check the following:

Ensure your chosen UPnP server software is capable of serving the ﬁle type you are trying to access. Some servers do not serve FLAC for instance.
The AXN can only play non DRM ﬁles. Files that have DRM controls cannot be played by the AXN. Some servers may be able to authorise and de-crypt Microsoft PlaysForSure before then serving the content to the AXN, but this operation is not guaranteed as it is purely a function of the server.
If attempting to play 24-bit WAV or FLAC content a wired Ethernet connection is normally required for reliable operation due to bandwidth considerations.
Check that the AXN is capable of playing back the ﬁle type you are trying to access.

If you have problems with USB Media playback check the following:

Check that the AXN is capable of playing back the ﬁle type you are trying to access.
For USB Media, the AXN can only play non DRM ﬁles. Files that have DRM controls cannot be played.
Check that your device does not require more than 1A if it is powered from the USB socket itself.
Check your device format is supported by the AXN.
The way you organise your USB media aﬀects how eﬃciently the AXN can browse the content. A good practice is to create folders for Artists within which you should have subfolders for each Album which then contain the tracks for that Album. Libraries with thousands of tracks in one folder will progressively slow down the AXN’s media browsing.

There is no power:

Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.

Frequently Asked Questions (FAQ)

Last updated: February 10, 2023 03:23. Revision #8872

Can the AXN10 support MQA content?****

– Although the AXN can receive MQA encoded content, it is not possible for the device to playback full MQA ﬁles via TIDAL Connect, because the AXN does not have an MQA decoder built in to unfold the MQA ﬁles.
– There are no plans to integrate MQA support into the AXN, as this would require a hardware modiﬁcation to install a Full MQA Decoder.

How do I set up my AXN10 with a DacMagic 200M for MQA passthrough?

– Although the AXN can receive MQA encoded content, it is not possible for the device to playback full MQA ﬁles via TIDAL Connect, because the AXN does not have an MQA decoder built in to unfold the MQA ﬁles.
– It is, however, possible to bypass the DAC in the AXN, and have the MQA ﬁle processed by an external DAC that supports MQA, such as the DacMagic 200M. This will allow the full unfold of the MQA ﬁle to take place in the DacMagic 200M, and you will still be able to control and queue your MQA ﬁles via the AXN.
– Please follow the below instructions on how to how to set this up:
– 1. Connect either of the Digital Outputs (SP/DIF Coaxial or Toslink Optical) of the AXN to the corresponding DacMagic 200M Digital Input (D1 or D2).
– 2. Connect the Balanced or Unbalanced Output of DacMagic 200M to your ampliﬁer.
– 3. Select the relevant D1/D2 Input on your DacMagic 200M.
– 4. Open the TIDAL app ‘Settings’ on your smartphone or tablet, and conﬁrm that the streaming quality is set to ‘Master’.
– 5. Select the AXN within the TIDAL Connect menu as your output device.
– 6. Processing of the MQA ﬁles will now be passed through to the DacMagic 200M, and MQA playback should be indicated on the DacMagic 200M by the relevant LED light.

Can I use more than one of the AXN10’s outputs at once?****

– If you wish to connect the AXN to one single device, you can use any output, digital or analogue, that you wish.
– If, however, you would like to connect the AXN to more than one device at a time, you can connect up to three devices and play simultaneously, as all outputs remain active at all times.
– Please note, however, that as the AXN does not contain a volume control, you will need to ensure that the devices connected to the player have their own volume control.

How do I stop the AXN10 from powering down when not in use?****

– The AXN will automatically switch to standby mode after 20 minutes of inactivity. This Automatic Power-Down (APD) feature can be disabled, by navigating to the device settings within the StreamMagic app.
– You can either disable this feature, or edit the length of time it takes for APD to be triggered, by selecting ‘Automatic Power-Down’.
CAMBRIDGE AUDIO AXN10 Network Streamer Player - powering
down

What USB HDs will the AXN10 support?****

– The primary function of the AXN is as a network music player and the USB port is intended for convenient connection of USB HDDs and SSDs. As such, we can not guarantee compatibility with all USB HDDs and SSDs.
– The AXN will read large capacity hard drives connected to the USB Media input. Some larger capacity drives, however, may require their own power supply, as the player’s USB port may not provide enough power for the drive to function.
– The AXN will support USB hard drives which are formatted to FAT32 and NTFS.

Can I play ﬁles from a connected USB HD when the AXN10 is not connected to a network?****

– This is not possible as the use of the StreamMagic app is required to be able to play local ﬁles from a connected USB HD.
– Please note that it is strongly recommended that the AXN is connected to a network at all times.

What is the Service port on the back of the AXN10 for?****

– The service port on the back of the AXN is intended for servicing use only by Cambridge Audio authorised service centres and dealers.
– Please do not connect any devices to the service port, as this may result in damage to the unit.

Do I need to connect both Antennas for the AXN10 to work?****

– Yes, if you are connecting your AXN to your network wirelessly, you will need to connect both of the supplied antennas to enable full Wi-Fi functionality and the strongest possible wireless network connection.
– Bluetooth functionality will also only be possible when one of the antennas is connected to the port with the Bluetooth symbol.

Does the AXN10 have pre-amp or volume control?****

– The AXN does not have a ‘pre-amp’ mode and it is not possible to control the volume of the unit, as it outputs a ﬁxed volume level.
– You will need to control the volume of the AXN via your connected ampliﬁer or DAC.

Does the AXN10 have a remote control?****

– The AXN does not have a remote control. The unit can be controlled and the settings can be adjusted via the StreamMagic app.

Manual Generated: 15/02/2023 – 17:23

Documents / Resources

| CAMBRIDGE AUDIO AXN10 Network Streamer Player [pdf] User Manual
AXN10, AXN10 Network Streamer Player, Network Streamer Player, Streamer Player
---|---