EGRETECH SONIC 2200W Portable Power Station User Guide

: June 9, 2024
: EGRETECH

Table of Contents

Introduction
Safe Use Instructions
Packing List
Product Specifications
Input Port Description
Output Port Description
Description of Product Features
Socket Specification Description
Button Operation
Display Function Description
Protection Prompt Description
Operating Diagram
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EGRETECH SONIC 2200W Portable Power Station User Guide

Introduction

Before first unpacking

The service life of this prod uct is 2 years, an d it s bat tery is a ble to su ppo rt at least 1000 dee charge and discharge. Before firstusing this produc t or if you need to store it for please fully charge this product. For more tips and tricks to keep your battery healthy, see precautions for battery: If you need to store this product for a long time, please fully charge it every 3 months a store it in a cool, dry place.If the above steps are not followed and the battery consequently amaged, the product warranty will be invalid.

Safe Use Instructions

Never allow the product to contact any liquid, and do not immerse the product into wateror make it wet. Never use the machine in rain or humid environment, or it may cause spontaneous combustion of the battery, or even causeexplosion.
U se of unofficial parts is strictly prohibited. If replacement is needed, please contact thedealer for purchase. Any product incidents or malfunctions caused by the useof unofficial parts resulting in loss, will not be the responsibility of the manufacturer.
It may result in dangers when the temperature of product is over high (Above 60°C). If the temperature is too low (Below -10°C), performance of the product will be seriously degraded, or even the requirements of normal use may not be met. The product can be used normally after room temperature is restored.
Do not use the machine in the environment of strong static electricity or magnetic field, otherwise it may work abnormally. For example, some protective functions of the machine may fail, resulting in a serious failure of the machine.
Never disassemble or pierce the product with sharp objects in any way. Otherwise, it will cause product failure, fire or even explosion.
In order to ensure your personal safety, do not use the machine again after it is strongly dropped or is hit by external force.
If the product accidentally falls into water during use, place it in a safe open area and stayaway from the product until it is completely dry. The dried product shall not be used again and shall be disposed of properly in accordance with local regulations. If a fireoccurs in the product, it is recommended to use the fire extinguishing equipment as shown in the following order: Sand, fire blanket, dry powder extinguishingagent, carbon dioxide extinguisher.
Do not place the machine in a microwave oven or pressure cooker.
Do not use wires orother metal objects to cause shortcircuit of the product.
Do not impact the machine, and do not place any heavy objects on the machine to cause deformation of the product.
If there is any dirt on socket of the machine, please use a piece of drycloth to clean it. Otherwise, it will cause poorcontact, which results in energy loss or failure to charge.
The product shall be stored in a dry and ventilated place.
In humid environment (E.g. seaside and waterside environment, etc.), it is recommended to use it together with a moisture-proof bag to avoid it being soaked in water. If any water is found inside the product, do not use/tum on the product again, please take anti-electric shock measures before touching the product, immediately put it in a safe and waterproof open area, and immediately contact the local distributor and customer service for treatment.
It is not recommended to power personal safety-related medical emergency equipment by this product, including but not limited to hospital version CPAP (Continuous Positive Airway Pressure), ECMO (Extracorporeal Membrane Oxygenation), etc. In addition, a home version CPAP is intended for use in a home environment and can be used normally without continuous professional monitoring. Follow your doctors advice and consult the manufacturer for restrictions on the use of the device. If it is used to power the general medical equipment, be sure to pay attention to the power condition to ensure that the power does not run out.
Power products will inevitably generate electromagnetic fields during use, which may affect the normal operation of implanted medical devices or personal medical devices, such as pacemaker, implanted cochlear, hearing-aid, defibrillator, etc. If any of these medical devices are used, please consult the manufacturer about the restrictions on their use to ensure that the product is working at a safe distance from implanted medical devices. (Such as pacemaker, implanted cochlear, hearing aid, defibrillator, etc.)
The power source is connected to the load of the refrigerator in the conventional mode, which may automatically shut down the power source due to the fluctuating power properties of the refrigerator. When this power source is connected to the refrigerator used for storing drugs, vaccines or other high value items, the user shall pay attention to the power on/off state and power loss.

Packing List

Sonic 2200W x 1

Instruction manual

AC input cable 1

Car input cable >/.1

Product Specifications

Product name: Portable Power Station Sonic
Product model: Sonic 2200W Output power: 2200W Product volume: 420.00 x 288.00 x 303.00mm Battery capacity: 43.2V; 51Ah; 2203.2Wh Noise volume: 43.0dB Max Product weight: si-t-21kg Working temperature: 0-40°C (Charging)/-10-40°C (Discharging) Charging mode: Solar Input: Supports solar input of 18V and 36V, and can simultaneously charged by two XT60 ports (Max 400W+Max 400W), which can be fully charged in about 4-5 hours. (When the input power of a single port exceeds 400W, it may trigger the protection system of the product. Please select a solar panel that meets the specifications to charge.) Car

Charging Input: Charged by an XT60 port (Max 200W). AC Input: The device can be fully charged in about 1.67 hours by AC input that is transferring by bidirectional inverter. LED function: Medium lightness – high lightness – SOS – flashing – off (5-mode cycle).
HMI display: Battery power progress bar, battery power percentage, batteryalarm, charging/ discharging power, remaining charging/discharging working time, port connection indicator, high/low temperature alarm, overload warning, and fan state.
USB-A output (x4): 5V-3A; 9V-2.6A; 12V-2A, 24W Max. Two ports shared 24W Max, four ports shared maximum 48W Max. (Protocols supported: Apple2.4A; QC2.0/3.0; FCP; AFC; DCP; SCP)

Input Port Description

| AC input socket: 120V single-phase input, L/N two-wire system. AC input voltage: 100V-120V/60Hz. Rated input power: 1800W.
---|---
| XT60 input port: DC input. Input voltage range: DC 11-46V (Rated: 18V/36V). Input current range: 12A Max (Rated: 11.2A). Rated input power: If using a solar panel with a rated voltage of 18V, the rated input for a single port is 200W. If using a rated voltage of 36V, the rated input for a single port is 400W.

Output Port Description

| AC output socket: Four electrical circuits with 120V AC anaphase output, L/N two-wire system. AC output voltage: 120V / 60Hz. Ra ted output power: R a ted 2200W Output no-load test: After the output power is less than 5W for 60 min, the AC output is turned off.
---|---
| Car output port: 12V DC output. Output voltag erange: 12.5V~13.8V (Ra ted: 1 3 . 2V). Max. DC current: 10A. Full-load output power: 132W.
Wireless charging area: 5V 1A; 12V ⎓1.25A output. Output voltage range: 5V~12V . Sock et pro tocol supported : Qi.
DC 5525 output port: Two 5525 interfaces share power with the cigar ette lighter sock et, with a t o tal power 132W Max. Output voltage range: 12.5V~13.8V . Ra ted output voltag e : 13.2V.
USBA output port: 2 interfaces share 24W, while 4 interfaces s are Max 48W . Output voltage range: 4.75V~5.25V; 8.55V~9.45V; 11.4V~12.6V . Sock etpr ot ocols supported: Apple2.4A; QC2.0/3.0; FCP; AFC; DCP; SCP.
| USBC output port: 100W Max (Single port independent). Output voltage range: 4.75V~5.25V; 8.55V~9.45V; 11.4V~12.6V; 14.25V~15.75V; 19V~21V . Sock etpr o to cols supported: Apple2.4A; PPS; PD3.0/2.0; QC4.0+/4.0/3.0/2.0; AFC; FCP; Low-voltage SCP/high-voltage SCP; PE2.0/1.1; SFCP.

Description of Product Features

Front view

Control switch forb DC output/Wireless output

Top view

Rear view

Side view

Socket Specification Description

Europe
Suitablefor use in most parts of Europe.

Japan/United States
Suitable for use in Japan and the United States.

United Kingdom
Suitable for use in the United Kingdom.

Please select the socket specifications appli cable to your country and region when purchasing.

Button Operation

Power on/off
When the switch is pressed and held for 3s in power-off state, the device shall be turned on, the key indicator light shall be on, and the device shall enter the charging and discharging operation at this time. When the switch is pressed and held for 3s in power-on state, the device shall be turned off, the indicator light shall be off and discharging output shall be stopped. Startup diagnosis (Automatic operation) Before this product operates, it will test itself on all links, digital circuits and logic software with preset phasor set, and preset state signals, so as to determine whether this product meets the operating conditions, if not, this product is not allowed to be put into operation. Test items are as follows: Bus voltage, AC bias voltage, AC current sampling bias voltage, AC voltage effective value, AC current effective value, LLC temperature.
AC on/off Short press once:
AC output is enabled, and indicator light of this button is on. Short press again: AC output is disabled, and indicator light of this button is off.
DC on/off Short press once:
DC car charger output port and wireless charging output are enabled, and indicator light of this button is on. Short press again: DC car charger output port and wireless charging output are disabled, and indicator light of this button is off.
USB on/off Short press once:
USB port output is enabled, and indicator light of this button is on. Short press again: USB port output is disabled, and indicator light of this button is off.
LED light (On state of this product) Short press once:
The LED light is on. When the LED light switch is pressed shortly, the LED light will work in an order of medium brightness -high brightness – SOS – flashing – off.

Display Function Description

Energy-saving status description
Front panel display sleeping mechanism: If no operation is done within 3min, the display will be turned off, and you can turn on it again by pressing any button. AC sleeping mechanism: If the load is continuously below SW or no load is detected within 60min, the load output will be automatically turned off. DC sleeping mechanism: If the load is continuously below 2W or no load is detected within 120min, the load output will be automatically turned off. USB sleeping mechanism: If the load is continuously below 2W or no load is detected within 120min, the load output will be automatically turned off. General sleeping mechanism: After the outputs are not turned on again within 90min after being turned off, the product will be automatically powered off.

Port indicator description

| USB-A output indicator| This icon will be on when the USB output control switch is turned on.
---|---|---
| USB-C output indicator| This icon will be on when the USB output control switch is turned on.
| AC output indicator| This icon will be on when the AC output control switch is turned on.
****| DC output indicator| This icon will be on when the DC/wireless output control switch is turned on.
| socket input indicator| This icon will be on when the solar panel or car output port is used forinput…./

If no power output is detected after connection, check whether the port is improperly connected.

Digital indicator function description

| Battery power progress bar indicator| \The battery power progress bar is indicated by a total of 50 segments, each of which indicates 2% of the battery capacity. The progress bar will light up from the first segment to the last segment when charging, and cycle repeatedly; The last segment of the battery power progress bar will flash when discharging.
---|---|---
| Battery power percentage| Percentage of remaining power during charging or discharging.
| Remaining charge/ discharge time display| The time required to fully charge during charging, and the service time of remaining power during discharging. When HOURS is on, it indicates the remaining hours. When MINS is on, it indicates that the remaining time is less than 1 hour.I (I
| Input/output power display (Power meter)| The current input/output power of the device is displayed. Input state: IN above the digits will blink.Output state: OUT above the digits will be always on.Pass-through charging state: When the input voltage ishigher than the output voltage, the letters IN will light up;When the output voltage is higher than the input voltage, the letters OUT will light up. The power display shows the larger value between the current input and output.

Protection Prompt Description

Please notice the displayed output power when using this product to charge other devices.
When powering a high-power device (Such as a microwave oven), the battery power will drop very quickly and may not be able to support output. Although this product is equipped with a high-efficienc inverter, there is still some energy lost in inversion, and therefore the battery fails to get the full rated capacity.
If this product fails to power other devices, you may need to check the power requirements of other devices, see the following Frequently Asked Questions for details.