DS Audio Grand Master Extreme Equalizer Instruction Manual
- June 9, 2024
- DS Audio
Table of Contents
DS Audio Grand Master Extreme Equalizer
Supplied items
Grand Master Extreme cartridge
Grand Master Extreme needle cover
Cartridge screw (M2.6)
Instruction manual
Specifications
- Output Signal level 70mV and more(at cartridge output)
- Channel Separation 27dB and more
- Needle Pressure 2.0g 2.2g(2.1 g is Recommended)
- Canti-lever&Needle One Piece Diamond
- Stylus Micro Ridge Stylus
- Weight 7.9 g
- Body Material Super Duralumin
- Cantilever holder material Stainless
Names and function
-
Power indicator LED
LED indicates power is on when it is lit. When Equalizer is turned on, yet LED is not lite, check the Cartridge connection and Equalizer connection -
Cantilever/ Stylus
Adjust the Stylus pressure carefully as recommended.
Other settings should follow as those for MM/ MC cartridges. -
Output pins
Connect Output pins as described in “Output pin connection”.
Precautions
-
Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.
The operational temperature should be 20degreeC to 26degree C. Warming up is recommended in winter time. -
This optical cartridge is an Amplitude proportional signal read out. It required our designated equalizer. Outputs from the equalizer should be connected to CD/ AUX terminals of your amplifier. Do not connect to Phono terminals.
“Output pin connection”
Stylus Replacement
Stylus replacement is available at OS Audio. Please consult our authorized
dealer for its cost and time.
Warranty
Owner’s Record
The model and serial numbers are located on the bottom. Record the serial
number in the space provided below. Refer to these numbers whenever you call
your Cartridge dealer regarding this product.
Model No. Grand Master Extreme
Serial No.
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
LIMITED WARRANTY
DS Audio warrants this product against defects in material or workmanship for
the time periods as stated below. Pursuant to this Limited Warranty, DS Audio
will, at its option, (1) repair the product using new or refurbished parts or
(2) replace the product with a new or refurbished product.
For the purposes of this warranty, “refurbished” means a product or part has
been returned to its original specifications. In the event of a defect, these
are your exclusive remedies. For a period of one (1) year from the original
date of purchase of the product, DS Audio, at its option, repair or replace
with new or refurbished product, product determined to be defective.
This limited warranty covers only the hardware components packaged with the
product. It deos not cover technical assistance for hardware.
Instructions: To obtain warranty service, you must deliver the product,
freight prepaid, in either its original packaging or packaging affording an
equal degree of protection to the DS Audio authorized service facility
specified.
Any parts or product replaced under this limited warranty will become the
property of DS Audio.
This limited warranty only covers product issues caused by defects in material
or workmanship during ordinary consumer use. It does not cover product issues
caused by any other reasons, including but not limited to product issues due
to commercial use, acts of God misuse, limitation of technology, or
modification of any art of product.
This limited warranty is invalid if the factory-applied serial number has been
altered or removed from the product.
This limited warranty is valid with the official receipt of our authorized
dealer which indicates the date of your purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>