Swim Fun MV-1572-1-2022 Bypass Valve Kit User Manual
- June 9, 2024
- swim fun
Table of Contents
MV-1572-1-2022 Bypass Valve Kit
Product Information: ByPass Kit
The ByPass Kit is a manual water flow control system for solar heating/solar collector systems. It can be used with all types of solar heaters. The kit includes a 3-way valve, T-joint, hose adaptors, hose clamps, and Teflon tape. The length of the hose needed depends on the number of solar heaters in the system. The product comes with manuals in several languages including Danish, Swedish, Norwegian, Finnish, English, Estonian, German, Dutch, and Polish.
Product Usage Instructions:
- Determine the length of hose required based on the number of solar heaters in your system.
- Connect the 3-way valve to the existing hose that conducts water from the pump to the solar heating system.
- Connect the 3-way valve to the new hose using the included hose adaptors.
- Connect the T-joint to the existing hose that conducts water from the solar heating system to the pool.
- Connect the T-joint to the new hose using the included hose adaptors.
- Seal all hose joints with Teflon tape and secure with hose clamps (supplied).
Note: The kit does not include hoses. You will need to purchase hoses separately.
Bypass kit for manual control of water flow around solar heating/solar panel system. Suitable for use with all types of solar heating systems. A Bypass kit allows water to bypass the solar heating system when there is no need for heating. A Bypass kit is also beneficial if you need to allow water to bypass the solar heating system at night rounder poor or very cloudy weather conditions. Under such conditions, the temperature of the water will fall, when it is passing through the solar heater. The Bypass kit contains everything you need to make a parallel connection from the solar heating system to bypass the pool water return pipe.
The kit contains the following
- 1 x 3-way valve
- 1 x T-joint/connector
- 3 x hose adaptors
- 6 x hose clamps
- Teflon tape (Hose not supplied)
You will need a length of hose corresponding to the number of solar heaters in your system. E.g. Swim & Fun article no. 1542.
Fitting to an existing pool hose Connect the 3-way valve a) to the existing hose which conducts water from the pump to the solar heating system and b) to the new hose (3 x hose adaptors are included). Connect the T-joint to a) the existing hose which conducts water from the solar heating system to the pool and b) to the new hose. Seal all hose joints with Teflon tape and secure with hose clamps (supplied).
Swim & Fun A/S – [email protected] – www.swim- fun.com
WARRANTY
The warranty is in effect for 12 months (plus 12 months of entitlement to file warranty claims) The warranty period applies from the date on your receipt. The receipt must be presented when requesting service during the warranty period. It is therefore important that you keep the receipt in a safe place. The warranty does not apply for normal wear, scratches and cosmetic damage. More specifically, the warranty does not apply for damage caused by:
- Improper use or handling.
- Carelessness and lost components.
- Repairs, modifications or similar actions other than those performed by the Swim & Fun service centre.
In the event of guarantee claims please contact your dealer. When returning a defective product, it must be packed in such a way that it is not damaged during transport. It is your responsibility that the product arrives safely. You must state your name, address, phone number and preferably your e-mail address. If the product are to be returned to you! Always remember to state what is wrong with your product.
For more information and tips, see our website: www.swim-fun.com This manual is protected by copyright law. Swim & Fun A/S: Denmark +45 7022 6856 – Sweden +46 771 188819
References
- Gifts for Him & Gifts for Her | Toys, Gifts & Clothing | Fun.com
- Pools, water care, and pool accessories