FIAMMA RAFTER F40van Tensioner LED Strip Instruction Manual

June 9, 2024
FIAMMA

FIAMMA RAFTER F40van Tensioner LED Strip

FIAMMA RAFTER F40van Tensioner LED Strip

MODLE

FIAMMA RAFTER F40van Tensioner LED Strip
FIAMMA RAFTER F40van Tensioner LED Strip
FIAMMA RAFTER F40van Tensioner LED Strip

Package contents

Package contents

Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualified personnel and in compliance with current local regulations.

Installation instructions

Installation instructions
Installation instructions
Installation instructions
Installation instructions
Installation instructions
Installation instructions

We remind you that the awning is a sun protection, so please close your awning in case of rain, wind or snow. Otherwise, please take the following precautions: lower one side of your awning, so that water can flow away and place the Rafter.

Installation instructions

ATTENTION: we only suggest a temporary use of the tension Rafter.

Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the laws for driving in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility.
The product has been designed and manufactured exclusively for the illumination of recreational vehicles, is not suitable for the illumination of home environments.
We recommend connecting the power cable to the vehicle’s cigarette lighter. Damage to the power cable can lead to abnormal operation of the product.
It is strictly forbidden to go around with the LED lights on; connect the power supply in order to inhibit current fl ow while the vehicle is running.
We do not recommend prolonged periods of viewing at close proximity of the LED strip.
The manufacturer will not be held responsible for claims for damages resulting from the following:

  • Defective installation or connection of the product.
  • Damage to the product caused by mechanical influences and overvoltage.
  • Alterations on the device without the express authorization of the manufacturer.

Safety instructions

EU Declaration of Conformity (DoC)

Date 05/ 10/2022

We

Company name: Fiamma S.p.A.
Postal address: Via San Rocco, 56
Postcode and city: Cardanol al Campo – (Vare e)
Telepho11e nu1nber: 0331 /709111
E-1nail address: Ila n1111a@fian1111 a.it

Declare that the DoC is issued under our sole responsibility and belong to the following product:

Apparatus model / Product:                Lighting systems
Trademark: Fiamma
Model/ Type: 98655-850

98655-902

98655-914

98655-91S

98655-848

98655-883

98655A884

98655-607

98655-849

98655-886

98655-471

986SSZ040

98655Z0S1

98655-885

98655Z098

9865SZ099

98655Zl34

| Rafter Led

Rafter Led Caravan store

Led A ,vning Case

Kit Led A ,vning Case 50

Led A ,vning Light

Led Garage Light

Led Sensor Door Light

Led Awning Light Gutter

Awning Arms Led

Led Step

Kit A ,vning Led

Kit Led Strip A ,vning

Kit Led Strip Awn ing High Brightness

Led Warning Solar

Kit Led F65 Eag le

Kit Led F45 Eagle

Rafter Led F40

The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

  • 2014/30/EU Electro Magnetic Compatibility Directive (EMCD).
  • 2014/35/EU Low Voltage Directive (LVD).
  • 2011/65/EU Restriction of the use of certain hazardous substances Directive (RoHS Directive).
  • 2012/1194EU Implementing Directive 2009/125/EC of the European Parlia1nent and of the Council ,vith regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipn1ent.
  • 2012/874/EU Supplementing Directive 201O/30/EU oif the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires.
  • EN 60529 (1991) + At (2000) The IP code or Ingress Protection ratin,gs are defined in international standard (IP grade 44)
  • IEC 62471:2006 Photobiological safety of lamps and lamp systems.

The following harmonised standards and/or technical specifications have been applied
Quality System Manager
Cerutti Davide

Warranty

Warranty Fiamma. In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

CUSTOMER SUPPORT

Symbols

fiamma.com

Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)

All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time,
without notice, prices, materials,
specifi cations and models or to cease
production of any model.

FIAMMA Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals