Ninja BL642 Personal and Countertop Blender Owner’s Guide

Ninja BL642 Personal and Countertop Blender

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR NUTRI NINJA® | NINJA® BLENDER DUO™ WITH AUTO-IQ™ TECHNOLOGY.

POLARIZED PLUG

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT modify the plug in any way.

WARNING

Extension cords are not recommended for use with this product.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. WARNING: Remove utensils prior to processing. Failure to remove may cause the jar to be damaged or to shatter which may cause personal injury.
2. WARNING: Stacked Blade Assembly is sharp, not locked in place and removable, handle with care. When handling the Stacked Blade Assembly, always hold it by the shaft. Failure to do so will result in a risk of laceration.
3. WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly first, holding it by the shaft. Failure to do so will result in a risk of laceration.
4. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure build-up, resulting in risk of the user being burned.
5. CAUTION: We do not recommend grinding in any of our Nutri Ninja® Cups.
6. CAUTION: Remove the Pro Extractor Blades® Assembly from the Nutri Ninja cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
7. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.
8. DO NOT allow the appliance to be used by children. Close attention is necessary when used near children. This is not a toy.
9. Never leave an appliance unattended when in use.
10. Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.
11. Turn the appliance Off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull it from the electrical outlet. Never pull from the power cord.
12. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from the electrical outlet; instead, grasp the plug and pull it to disconnect.
13. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped, or is damaged in any manner. This appliance has no serviceable parts. Return the appliance to SharkNinja Operating LLC for examination, repair or adjustment.
14. DO NOT let the power cord hang over the edge of the table or counter or touch hot surfaces such as the stove.
15. Always use the appliance on a dry, level surface.
16. Keep hands, hair, clothing, as well as utensils out of the container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.
17. Avoid contact with moving parts.
18. DO NOT attempt to sharpen blades.
19. DO NOT use the appliance if blade assemblies are bent or damaged.
20. To reduce risk of injury, never place the blade assemblies on the base without the pitcher or Nutri Ninja cup properly attached.
21. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).
22. The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.
23. DO NOT remove the container from the motor base while the appliance is in operation.
24. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
25. DO NOT expose containers to extreme temperature changes.
26. DO NOT overfill.
27. DO NOT operate the appliance empty.
28. To reduce the risk of burns, always allow the appliance to cool before taking off parts and before cleaning.
29. In the event that the unit overloads, the control panel lights will flash and the unit will shut down. Unplug the appliance and let it cool down for approximately 15 minutes before using it again.
30. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.
31. The maximum rating is based on the Stacked Blade Assembly (a pitcher) that drives the greatest power and other recommended attachments may draw significantly less power or current.
    SAVE THESE INSTRUCTIONS

TECHNICAL SPECIFICATIONS

• Voltage: 120V~, 60Hz.
• Power: 1500 Watts
• Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
• Max Liquid Capacity: 64 oz. (8 cups, 1.9 L)
• Nutri Ninja® Cup Capacity : 18 oz. (2.25 cups, 530 mL); 24 oz. (3 cups, 710 mL); 32 oz. (4 cups, 950 mL)

Getting Started

Getting To Know Your Nutri Ninja® Ninja® Blender Duo™ with AUTO-iQ™ Technology

The Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology is a professional, high-powered innovative tool with a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

• a Jumbo Multi-Serve 32 oz. Nutri Ninja® Cup
• b Regular 24 oz. Nutri Ninja Cup
• c Small 18 oz. Nutri Ninja Cup
• d Pro Extractor Blades® Assembly
• e Sip & Seal® Lids (x3)
• f Pitcher
• g Pitcher Lid with Locking Handle
• h Stacked Blade Assembly
• i Motor Base
• j Power Cord (not shown)
  NOTE: Blade assemblies are not interchangeable.

Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology Features:

• Ninja® Blade Technology
• BPA Free Pitcher, Nutri Ninja Cups and Lids
• Drip-Free Pour Spout
• LED Control Panel with Timer
• Sturdy, Non-Slip Base
• Smart Lid technology for easy release
• 3 speeds: Low, Medium, & High
• 5 AUTO-iQ Programs – AUTO-iQ Frozen Drinks/Smoothies, AUTO-iQ Puree, Nutri Ninja AUTO-iQ Blend, Nutri Ninja AUTO-iQUltra Blend and AUTO-iQ Pulse
• Nutri Ninja Nutrient & Vitamin Extraction*
• Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies
  

Before First Use

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:
IMPORTANT

• Make sure that the motor base is plugged in for use.
• Never add ingredients into the container before placing the Blade Assembly in first.
• Blade Assemblies are not interchangeable.
• DO NOT attempt to operate the appliance without the lid on.
• Never run the appliance empty.
• Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the blender pitcher. Failure to do so will result in a risk of laceration.
WARNING: Stacked Blade Assembly is sharp and not locked in place. If pouring with the lid removed, carefully remove the Stacked Blade Assembly first, holding it by the shaft. Failure to do so will result in a risk of laceration.

CAUTION: Do not immerse the motor base in water or any other liquid.

1. Remove all packaging material and labels from the appliance. Separate/remove all parts from each other.

2. Wash the lids, pitcher, Nutri Ninja® cups, and Blade Assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with the blades.
   WARNING: Handle the Blade Assemblies with care when washing, as the blades are sharp.

3. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.

4. The pitcher, Nutri Ninja cups, lids, and blade assemblies, are all dishwasher safe. It is recommended that the lids and blade assemblies be placed on the top rack. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.

5. Wipe the motor base clean with a damp cloth.

Assembly and Use of the Pitcher

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

It’s best to add the liquid ingredients first and then the dry ingredients.

1. Review the warning and caution statements above before proceeding to number 2.

2. Place the motor base on a clean, dry, level surface such as a counter or tabletop. Press down on the motor base to make sure that the Suction Cups adhere to the counter or tabletop.

3. Align and lower the Pitcher onto the motor base. (Fig. 1) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.

4. Rotate the pitcher clockwise until it clicks in place. As the pitcher rotates, it will lower and the safety tabs on the bottom of the pitcher will slide under the safety tabs on the top of the motor base. (Fig. 2)

5. The pitcher can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner. (Fig. 3a, Fig. 3b)

6. Holding the Stacked Blade Assembly by the top of the shaft, place it onto the drive gear inside the pitcher. Ensure that the Stacked Blade Assembly is seated properly and is standing upright. (Fig. 4)
   NOTE : The Stacked Blade Assembly will fit loosely onthe drive gear.

7. Add the ingredients to the pitcher, making sure that they do not exceed the highest measured marking line on the side of the pitcher.
   NOTE: If you need to add additional ingredients while the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.
   NOTE: When blending any kind of liquids, such as mixtures of any drinks or smoothies, do not exceed the “MAX” liquid mark (64 oz.) on the Pitcher.

8. Plug the power cord into the electrical outlet and press the power button .
   IMPORTANT: As a safety feature, the power light will flash and the motor will not work if the Pitcher and lid are not installed correctly. When the Pitcher and lid are installed properly, the power light will be solid, indicating that the appliance is ready for use.

9. Holding the lid by the handle in the upright position, place it on top of the Pitcher aligning the triangle located on the lid with the triangle located on the Pitcher’s handle. (Fig. 5a) Press the handle down until you hear a click. The triangles on the lid and the pitcher handle MUST be aligned in order for the blender to turn on. (Fig. 5b)

10. Review the warning and caution statements on page 13 before proceeding.
    NOTE: Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base. (Fig. 6)

11. Press the power button to turn on the unit. Select the speed or AUTO-iQ Program that best suits your needs. The AUTO-iQ program will stop the appliance automatically at the end of the program. (Fig. 7)

12. To pause the appliance, press the selected speed or AUTO-iQ Program a second time. When the program is paused, the light on the program button will flash until you press it again to resume the rest of the program.

13. When you have reached your desired consistency, stop the appliance by pressing the power button ( ) and wait for the Stacked Blade Assembly to stop turning. (Fig. 8)

14. Turn the pitcher counterclockwise to remove and then lift off the base. (Fig. 9)
    WARNING: Never insert your hands in the pitcher as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

15. Open the pour spout cap and use the spout to empty the liquid contents.

16. For thicker consistencies, first, remove the lid by pressing the release button and pulling the lid handle up to a 90-degree angle to lift the lid off the pitcher. Then, carefully remove the Stacked Blade Assembly by the top of the shaft. Place Stacked Blade Assembly away from the work area to avoid accidental contact. Finally, empty the contents from the pitcher. (Fig. 10)

17. Make sure that the unit is unplugged when not in use.

Assembly and Use of the Nutri Ninja™ Cups

WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.

NOTE: Nutri Ninja® | Ninja® Blender Duo™ with AUTO-iQ™ Technology can sense which jar is on the motor base. The function lights will illuminate depending on which jar is placed on the motor base. (Fig. 1)

1. Review warning and caution statements above before proceeding to number 2.

2. Place the motor base on a clean, dry, level surface such as a counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

3. Add ingredients to the Nutri Ninja cup.

4. Place the Pro Extractor Blades Assembly onto the cup and tightly screw it on clockwise until you have a good seal. (Fig. 2)

5. Turn the Nutri Ninja cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Rotate the Nutri Ninja cup clockwise until it locks in place, you will hear a click when the lock is engaged. (Fig. 3)

6. Press the power button on, and select the speed or AUTO-iQ program that suits your needs. The AUTO-iQ program will stop the appliance automatically at the end of the program. (Fig. 4)

7. To pause the appliance, press the selected speed or AUTO-iQ Program a second time. When the program is paused, the light on the program button will flash until you press it again to resume the rest of the program.

8. Once you have reached your desired consistency, stop the appliance by pressing the power button and wait for the blade to stop turning. Turn the Nutri Ninja cup counter-clockwise and pull straight up to remove. (Fig. 5, Fig. 6)
   NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max Liquid” line.

9. Turn the cup upright and remove the Pro Extractor Blades Assembly by twisting the blade assembly counter-clockwise.

10. Place the Sip & Seal® lid onto the Nutri Ninja cup, twist clockwise to seal and enjoy!

11. Make sure that the motor base is unplugged when not in use.

Programs, Speed Settings & Uses for the Pitcher

FUNCTION| CONTAINER| BLADE TYPE| SPEED or PROGRAM| TYPE OF FOOD
---|---|---|---|---
Processing| Pitcher| Stacked Blade Assembly| AUTO-iQ™ Puree

Medium

| Dips

Batters

Chopping

|

Pitcher

| Stacked Blade Assembly|

AUTO-iQ Pulse

| Salsa Vegetable Nuts
Frozen Drinks / Ice Crush|

Pitcher

| Stacked Blade Assembly| AUTO-iQ Frozen Drinks/ Smoothies| Ice Frozen Drinks

Pureeing

|

Pitcher

| Stacked Blade Assembly|

AUTO-iQ Puree

| Smoothies Soups* Milkshakes

When blending soups, make sure they’re cooled to room temperature first – Ninja® containers are not intended for hot blending.

Programs, Speed Settings & Uses for the Nutri Ninja® Cup

FUNCTION| CONTAINER| BLADE TYPE| SPEED or PROGRAM| TYPE OF FOOD
---|---|---|---|---

Smoothies

|

Nutri Ninja Cup

| Pro Extractor Blades™ Assembly|

Nutri Ninja AUTO-iQ Blend

| Smoothies Frappes Milkshakes Protein Drinks

Green Smoothies

|

Nutri Ninja Cup

|

Pro Extractor Blades Assembly

|

Nutri Ninja AUTO-iQ Ultra Blend

| Frozen Fruits Frozen Vegetables Kale

Celery Spinach Seeds Ice

Grating

|

Nutri Ninja Cup

| Pro Extractor Blades Assembly| AUTO-iQ Pulse High| Grated Cheese Bread Crumbs Spices

Chopping

|

Nutri Ninja Cup

| Pro Extractor Blades Assembly| AUTO-iQ Pulse High| Salsa Vegetable Nuts

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any blade assembly and before cleaning.
CAUTION: DO NOT immerse the motor base in water or any other liquid.

1. Separate/remove all parts from each other.

2. Hand Washing: Wash the lids, pitcher, Nutri Ninja® cup, and blade assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with the blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly. Dishwasher: The containers, lids, blade assemblies and attachments are all dishwasher-safe. The lids and blade assemblies are top-rack dishwasher safe. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.
   WARNING: Handle the Stacked Blade Assembly, and Pro Extractor Blade Assembly with care when washing, as the blades are sharp. Contact with the blades’ edges can result in a laceration.

3. Wipe the motor base clean with a damp cloth. Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.

HOW TO STORE

1. Store the Nutri Ninja® | Ninja® Blender Duo™ with Auto-iQ™ Technology upright with the blade assembly inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won’t cause harm. Wrap the power cord around the cord wrap on the back of the motor base.
   RESETTING THE MOTOR THERMOSTAT
   The Nutri Ninja | Ninja Blender Duo with AUTO-iQ

2. Technology features a unique safety system that prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance, follow the resetting procedure below:

3. Unplug the appliance from the electrical outlet.

4. Remove and empty the container and ensure that no food is jamming the blade assemblies.

5. Allow the appliance to cool for approximately 15 minutes.

6. Re-install the container onto the base and re-plug the appliance into the electrical outlet.

7. Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Troubleshooting Guide

The Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

| Make sure the container is securely placed on the motor base.

Make sure the lid is securely on the container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button to turn “On”. Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has been overloaded. The appliance will stop and the power light will flash. Unplug it and wait approximately 15 minutes before using it again.

The unit has overheated. Unplug it and wait approximately 15 minutes before using it again.

Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.| Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery.| The food has been over- processed. Use the AUTO-iQ™ Pulse button for controlled processing.
Food Collects On the Lid or On the Sides of the Container.|

The mixture is too thick. Add more liquid.

You Cannot Achieve Snow From Solid Ice.| Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Motor Base Won’t Stick to the Counter or Table Top.

| Make sure the surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as wood, tile, and non-polished finishes.

DO NOT attempt to use the appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).

You get an “Err” Message

| Your Ninja® is able to detect which jar is on the base. You may be trying to use a program that is not designed for the jar you have installed. The

programs will light up indicating which programs are available for each jar.

You have a blinking red light

| The unit is not installed properly. For your safety, the unit will only be able to be turned on when it is properly assembled. Please refer to the assembly pages of this inspiration guide for assistance.

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions. The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support, call 1-877-646-5288 or visit our website ninjakitchen.com. If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.

IMPORTANT: Carefully pack items to avoid damage in shipping. Be sure to include proof of purchase date and to attach the tag to the item before packing with your name, complete address, and phone number with a note giving purchase information, model number, and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

PRODUCT REGISTRATION

Please visit ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase, and model number along with your name and address. The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

FAQs

What is the function of a countertop blender?****

Countertop blenders are designed to mix, purée, and chop food. Their strength is such that the ability to crush ice is an expected feature.

What can I use a personal blender for?****

Personal blenders are significantly smaller than their full-size counterparts, and since you can drink out of the cup you’re blending with, they’re great for protein shakes and smoothies.

Can you use a blender instead of food processor?****

Although food processors and blenders share some functions, they are not interchangeable. Primarily, a blender is used to puree or crush ice. Use a blender if your final product is something you can drink, such as a mocktail or protein shake, drizzle or dip.

How powerful does a blender need to be?****

The more difficult a blending task, the more power it is going to require. For most traditional home use like making fresh fruit smoothies and milkshakes, a 500-watt blender is generally considered adequate.

How many parts are in a blender?****

The parts of the blender, from top to bottom, are the lid, jar, blades, gasket, jar base and housing.

How do you maintain a blender?****

Unplug the unit and wipe it down with a clean, damp cloth after every use. At the end of the workday, wipe down the blender using a cloth and soap and water. Using a hose or water pressure can damage the motor. Regularly clean the blade to avoid tainting the taste of dishes with other flavors.

Can you travel with a personal blender?****

Blenders are allowed in carry-on bags if the blade has been removed. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors.

What are the settings on a blender?****

Most traditional blenders feature a control panel on the base and give you the option of selecting different settings based on the recipe you are using. These options include mix, puree, stir, chop, and liquefy.

Does a blender use a lot of electricity?****

The average blender uses anywhere from 300 to 1,000 watts. High-powered blenders typically have more than 1,000 watts, and they are becoming more popular among consumers. Tougher foods could require a stronger blender and motor than soft, fresh foods when blending.

Does blender stop automatically?****

The Blender will automatically shut off after 2 minutes of continuous use to prevent damage to the blender and for safety precautions. If you need to continue using the blender turn off (or unplug), then being to use the blender again.

Video – Product Overview

Download The PDF Link:Ninja BL642 Personal and Countertop Blender PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>