PLIANT TECHNOLOGIES MicroCom 900M Receiver User Guide
- June 10, 2024
- PLIANT TECHNOLOGIES
Table of Contents
TECHNOLOGIES Micro Com 900M Receiver
User Guide
IN THIS BOX
WHAT’S INCLUDED WITH MICROCOM 900M?
- Holster
- Lanyard
- USB Charging Cable
- Quick Start Guide
- Product Registration Card
ACCESSORIES
OPTIONAL ACCESSORIES
- PAC-USB6-CHG: Micro Com 6-Port USB Charger
- PAC-MC-SFTCASE: Micro Com Soft Travel Case
- PAC-MCXR-5CASE: Micro Com Hard Travel Case
- CAB-4F-DMG: Micro Com to AD903 DMG to XLR Cable
- Selection of compatible headsets (see Pliant website for more details)
SETUP
-
Connect a headset to the backpack.
-
Power on. Press and hold the Power button for three (3) seconds, until the screen turns on.
-
Select a Group. Press and hold the Mode button for 3 seconds until the “GRP” symbol is blinking on the LCD. Then, use the Volume +/- buttons to select a group number from 0-51. Short-press Mode to save your selection and proceed to ID setting.
IMPORTANT Belt packs must have the same group number to communicate. -
Select an ID. When “ID” begins to blink on the LCD, use the Volume +/- buttons to select a unique ID number. Press and hold Mode to save your selection and exit the menu.
a. Pack IDs range from 00-04.
b. One pack must always use the “00” ID and serve as the master pack for proper system function. “MR” designates the master pack on its LCD.
c. Listen-only packs must use the “L” ID. You may duplicate ID “L” on multiple belt packs if setting up listen-only users. (See the Microcosm 900M Manual for more information about that process.)
d. Shared Talk beltpacks must use the “Sh” ID. You may duplicate ID “Shh” on multiple belt packs if setting up shared users. However, the “Shh” ID cannot be used at the same time as the last full-duplex ID (“04”).
OPERATION
Talk – Use the Talk button to enable or disable talk for the device. This
button changes with a single, short press. “TK” appears on the LCD when
enabled.
For full-duplex users, use a single, short press to toggle talk on and off.
For Shared Talk users (“Sh”), press and hold while talking to enable it for
the device. (Only one Shared Talk user can talk at a time.)
- Volume Up and Down – Use the + and — buttons to control the volume. “VOL” and a numerical value from 00-09 appear on the LCD when volume is adjusted.
Multiple Micro Com Systems
- Each separate Microcosm system should use the same Group for all beltpacks in that system. Pliant recommends that systems operating in proximity to one another set their Groups to be at least ten (10) values apart. For example, if one system is using Group 03, another system nearby should use Group 13.
Battery
- Battery life: Approx. 8 hours
- Charge time from empty: Approx. 3.5 hours
- Charging LED on beltpacks will illuminate red while charging and will turn off when charging complete.
- Beltpacks may be used while charging, but doing so may lengthen charge time.
Menu Options
To access the menu, press and hold the Mode button for 3 seconds. Once you
have finished your changes, press and hold Mode to save your selection and
exit the menu.
Menu Setting | Default | Options | Description |
---|---|---|---|
Sidetone | S3 | SO | Off |
S1—S5 | Levels 1-5 | ||
Receiving Mode | PO | PO | Rx & Tx Mode |
PF | Rx-Only Mode (Listen-Only) | ||
Mic Sensitivity Level | C1 | Cl—05 | Levels 1-5 |
Audio Output Level | UH | UL | Low |
UH | High |
Recommended Settings by Headset
Headset Type | Recommended Setting |
---|---|
Mic Sensitivity | Audio Output |
Headset with boom mic | Cl |
Headset with lavalier mic | C3 |
CUSTOMER SUPPORT
Pliant Technologies offers technical support via phone and email from 07:00 to
19:00 Central Time (UTC-06:00). Monday through Friday.
+1.844.475.4268 or +1 334 3211160
customersupportOplianttechnologies.com
You may also visit our website
(www.plianttechnologies.com) for live
chat help. (Live chat available 08:00 to 17:00 Central Time (UTC-06:00),
Monday through Friday.)
Additional Documentation
This is a quick start guide. For additional details on menu settings, device
specifications, and product warranty, view the full Micro Com Operating Manual
on our website. (Scan this OR code with your mobile device to navigate there
quickly.)
COPYRIGHT 0 2022 Pliant Technologies, LLC. All rights reserved. Pliant°,
MicroCom°, and the Pliant ‘V” logo are registered trademarks of Pliant
Technologies, LLC. Any and all other trademark references within this document
are property of their respective owners.
Document Reference: D0000512_F
For more information visit
www.plianttechnologies.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>