BAMBURY Sonar Premium Electric Blanket Instruction Manual
- June 10, 2024
- BAMBURY
Table of Contents
Sonar Premium Electric Blanket
Instruction Manual
Sonar Premium Electric Blanket
IMPORTANT INSTRUCTIONS – RETAIN FOR FUTURE USE
Please ensure the contents of this manual are read carefully before operating
your new appliance, even if you are familiar with this type of product
SAFETY PRECAUTIONS
DO
DO use as an under blanket only
DO switch off at the power outlet and remove the plug when the electric
blanket is not in use
DO ensure that the electric blanket is used only on an alternating
current supply circuit of the proper voltage
DO allow the electric blanket to cool down before folding and storing
DO frequently examine for signs of wear on the blanket, controller and
cord
DO discontinue use immediately if any abnormality or defect appears
during operation, and consult the place of purchase or the supplier regarding
its repair
DO have the electric blanket inspected by a qualified and registered
person after 3 years of use. Repairs, by law, must be undertaken by a
qualified and registered electrician
DO carefully follow the instructions for machine, hand washing and
localised soiling (Tie Down model excluded)
DO detach the controller before washing the electric blanket (Tie Down
model excluded)
DO keep the supplied flexible cord and switch outside of the bed, as far
away as practical
DO keep the control unit away from open windows
DO ensure that the heating area (element) on any side of the bed does not hang
over the edge of the mattress, and that the size of the electric blanket is
suitable for the intended mattress
DO keep the electric blanket in the fully spread position at all times
during use to avoid overheating. It is imperative that the electric blanket is
frequently inspected to ensure that this condition is maintained
DO ensure that children are supervised while using the device that they
do not play with the appliance
Sonar Electric Blanket Instruction Manual
DO NOT
DO NOT use the electric blanket for anything other than domestic use
only. It is not intended for use in hospitals
DO NOT use this electric blanket on an adjustable bed, futon or similar,
in which the cord can be caught, tangled, rucked or damaged
DO NOT use the electric blanket on a water bed
DO NOT allow young children or infirm persons to use the electric blanket
without supervision unless the controls have been pre-set by a parent or
guardian, or unless the child has been adequately instructed on how to operate
the controls safely
DO NOT allow persons (including children) with reduced physical, sensory
or mental capabilities, or lack of exprience and knowledge, to use the
appliance unless they have been given supervision or adequate instructions by
a person responsible for thier safety
DO NOT allow children under the age of three or infirm persons to use
this appliance due to their inability to react to overheating
DO NOT allow persons suffering from bed-wetting to use this electric
blanket
DO NOT use for pets, this is for human use only
DO NOT switch the power on if the electric blanket is wet or folded
DO NOT use the electric blanket at the high settings for an extended
period of time, as it can result in skin burns
DO NOT use when tucked in or folded
DO NOT use pins on, or through the electric blanket as this can cause
damage to the electrical wiring
DO NOT leave heavy objects on the bed when the unit is switched on, e.g.
folded blankets, clothes, suitcases, etc.
DO NOT dry clean the electric blanket. Dry cleaning liquid may have a
harmful effect on the insulation or covering of the heating unit
DO NOT fold too tightly when storing. Fold neatly without sharp bends in
the heating element and store where no objects will be placed on top of it.
Avoid pressing creases into the electric blanket
DO NOT use if the supply cord is damaged. It must be replaced by the
manurfacturer, its service agent or similarly qualified persons in order to
avoid a hazard
FITTING THE BLANKET
The electric blanket should be securely fastened to your mattress. If it is
fully fitted with fabric side walls, ensure that all corners have covered the
mattress evenly. If it is a tie down electric blanket, make sure it is
securely tied down in each corner.
The control/s should be closest to the end nearing the pillow.
If you are using a mattress protector, place it over the electric blanket.
Only use a size suitable for the size of your mattress.
Once the electric blanket is securely fitted to your mattress, connect the
plug to the nearest power source and switch on. Ensure that the hand controls
are not tucked in to the sides, and are not exposed to moisture.
Only use the controller model type as specified at the back of this manual.
OVERHEATING
All electric blankets are fitted with our Overheating Safeguard System.
This offers protection against overheating or damage to the element by
disengaging the power to the heating element before any hazards may occur.
If the product is misused against the instructions provided, the warranty will
be voided.
CHECK DAILY THAT YOUR ELECTRIC BLANKET IS FLAT, FULLY SPREAD OUT AND
SECURED BEFORE SWITCHING ON.
FAILURE TO OBSERVE THESE INSTRUCTIONS WILL CAUSE OVERHEATING.
This will activate our Overheating Safeguard System, or leave the electric
blanket inoperative, voiding all warranties.
Do not be concerned if you notice a blue flash in the switch when it is moved
from one setting to another. This is NOT dangerous and is only the copper
parts making contact.
INSTRUCTIONS FOR STANDARD MODELS
The following instructions are for the following models:
Single | SEBS | 70W |
---|---|---|
King Single | SEBKS | 90W |
Double | SEBD | 2x60W |
Queen | SEBQ | 2x60W |
NZ King | SEBKB | 2x60W |
King | SEBK | 2x70W |
NZ Super King | SEBK | 2x70W |
Super King | SEBSK | 2x70W |
NZ California King | SEBCK | 2x70W |
Single | STDEBS | 60W |
--- | --- | --- |
Queen | STDEBQ | (2x60W) |
HOW TO OPERATE
Once the electric blanket is securely fitted to your mattress, connect the
plug to the nearest power source and switch on.
Ensure that the hand controls are not tucked in to the sides, and are not
exposed to moisture.
It
is recommended that the electric blanket is turned on to setting 3,1-2 hours
prior to going to bed, and the setting is lowered or switched off completely
when going to bed. There are three temperature settings; the electric blanket
is at it’s hottest when the controller is set at the position indicated by
three dots.
Sonar Electric Blanket Instruction Manual
INSTRUCTIONS FOR PREMIUM MODEL
The following instructions are for the following models:
Single | SPEBS | 70W |
---|---|---|
King Single | SPEBKS | 90W |
Double | SPEBD | 2x60W |
Queen | SPEBQ | 2x60W |
NZ King | SPEBKB | 2x60W |
King | SPEBK | 2x65W |
NZ Super King | SPEBK | 2x65W |
Super King | SPEBSK | 2x65W |
NZ California King | SPEBCK | 2x65W |
BEFORE USE
When using your electric blanket for the first time, set the body and foot
temperatures to 9, and time to 5 hours. Leave the electric blanket to heat and
time out on its own.
This process will remove any humidity in the cover and alleviate any odours
present from the manufacturing process. Continual use thereafter will then
eradicate any odour (if present).
TIMER SETTINGS
The “Timer” button can be used to set the operation time, the electric blanket
will automatically switch off once it reaches this time. Keep pressing the
“Timer” button until it reaches the desired operation time. If the timer has
not been set, the standard operation time is 1 hour.
TEMPERATURE SETTINGS
Turn the On/Off switch to the “On” position.
To set the temperature in the body section, press the button “Body”. To set
the temperature in the feet section, press the button “Feet”.
The temperature settings can be changed by pressing the buttons again turning
it to the desired setting (0-9).
It is recommended that the electric blanket is turned on to setting 9, 1-2
hours prior to going to bed, and the setting is lowered or switched off
completely when going to bed.
Warning – The highest temperature setting (9) is for preheating only and
not recommended for continuous operation.
CARE INSTRUCTIONS
PRIOR TO CLEANING
Switch to OFF and ensure the plug has been removed from the power outlet.
If the electric blanket has a detachable controller disconnect it by pulling
the triangular tab away from the electric blanket with one hand, and pulling
the plug out with your other hand.
The controller cannot get wet or it will stop working.
Before washing, check that the electric blanket is stretched out, maintaining
a rectangular shape, and that no heating wires have been squashed together.
WASH INSTRUCTIONS FOR ELECTRIC BLANKETS WITH FIXED CONTROLLERS
Spot clean in warm water with mild detergent. Press water out while flat with
towels. Dry on stable clothesline, do not use pegs.
| DO NOT bleach
---|---
| DO NOT iron
| DO NOT dry clean
| DO NOT machine or hand wash
| DO NOT insert pins
| DO NOT use with an infirm person, infant or person insensitive to heat
WASH INSTRUCTIONS FOR ELECTRIC BLANKETS WITH DETACHABLE CONTROLLERS
Do not wring, press water out while flat. Dry on stable clothesline, do not
use pegs.
| DO NOT bleach
---|---
| DO NOT iron
| DO NOT dry clean
| Cold machine wash on wool or delicate cycle.
| DO NOT insert pins
| DO NOT use with an infirm person, infant or person insensitive to heat
The connections to the electric blanket should be kept free of moisture as
much as possible. Do not turn the blanket on unless it is completely dry.
TREATMENT FOR LOCALISED SOILING
The affected area should be sponged gently using a natural wool detergent or
mild soap flakes in lukewarm water, followed by two dabs of the sponge with
clean lukewarm water. Lightly compress the treated area between two towels to
absorb excess water.
WARRANTY INFORMATION
WARRANTY
The benefits conferred by this warranty are in addition to all implied
warranties, other rights and remedies in respect of the product, which the
consumer has under the Australian Consumer Law and similar State and Territory
Laws.
The original purchaser of this product is provided with the following
warranty, subject to the following conditions.
Bambury Pty Ltd warrants this product for a period of 2 years from the date of
purchase for all part defects in workmanship or materials. The product will be
replaced free of charge.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law.
You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. Any
costs of returning and collecting the product is at the customer’s expense. If
the item is/ becomes faulty, cease using the product and contact the retailer
or Bambury Pty Ltd:
Ph:1300 766 762 (Australia) or 0061 8 9418 9000 (If calling from outside of
Australia)
Email: info@bambury.com.au
WARRANTY CONDITIONS
This warranty is only valid for the electric blanket used, washed and
stored in accordance to the manufacturer’s instructions. The electric blanket
must not be modified or changed in any way.
Connection must be to the voltage requirements as specified in the ratings
label located on the product/manual.
Bambury Pty Ltd and the manufacturer do not accept liability for any direct or
consequential damage, loss or other expense arising from misuse, or incorrect
installation and operation of the electric blanket.
Warranty will only be given where proof of purchase is provided, i.e. On the
presentation of the original purchase receipt or invoice.
The purchaser should also complete and return the included Warranty Card to
the postal address shown soon after the date of purchase.
The electric blanket is designed for domestic use only and not warranted for
industrial or commercial use.
Note: No user serviceable parts inside. Unauthorised modifications void
warranty.
Return to place of purchase for replacement or repair under warranty.
Standard Electric Blankets (Tie Down)
Approval Number SAA-180079-EA Controller Model: SEBC21
Single Queen
STDEBS 60W STDEBQ 2x60W
Standard Electric Blankets
Approval Number SAA-180079-EA Controller Model: SEBC21
Single | SEBS | 70W |
---|---|---|
King Single | SEBKS | 90W |
Double | SEBD | 2x60W |
Queen | SEBQ | 2x60W |
NZ King | SEBKB | 2x60W |
King | SEBK | 2x70W |
NZ Super King | SEBK | 2x70W |
Super King | SEBSK | 2x70W |
NZ California King | SEBCK | 2x70W |
Premium Electric Blankets
Approval Number SAA-202780-EA Controller Model: SPEBC21
Single | SEBS | 70W |
---|---|---|
King Single | SEBKS | 90W |
Double | SEBD | 2x60W |
Queen | SEBQ | 2x60W |
NZ King | SEBKB | 2x60W |
King | SEBK | 2x70W |
NZ Super King | SEBK | 2x70W |
Super King | SEBSK | 2x70W |
NZ California King | SEBCK | 2x70W |
Made in China for Bambury Pty Ltd
ABN: 68 104 570 531
www.bambury.com.au
info@bambury.com.au
2 Year Warranty Replacement
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>