Autonics LP-A Series Color LCD Logic Panel Instructions
- June 10, 2024
- Autonics
Table of Contents
Autonics LP-A Series Color LCD Logic Panel Instructions
TCD210070AC
Color LCD Logic Panel
LP-A Series
CATALOG
For your safety, read and follow the considerations written in the instruction manual, other manuals and Autonics website.
The specifications, dimensions, etc. are subject to change without notice for product improvement. Some models may be discontinued without notice.
Features
-
Equipped with TFT LCD for realizing True color
-
Easier system configuration and use with PLC, HMI, I/O all-in-one design
-
Horizontal/Vertical installation according to environment
-
Available to monitor device of the connected controllers even without user screen data
-
Using user screen drawing program ‘atDesigner’
: More variety functions, objects and library image
: Intuitive user interface
: Multilingual table function: switching language of user screen by touching a button -
Various communication interface: RS232C, RS422, Ethernet, CAN
Ordering Information
This is only for reference, the actual product does not support all
combinations.
For selecting the specified model, follow the Autonics website.
❶ Screen size
070: 7.0 inch
104: 10.4 inch
❷ Interface
❸ I/O configuration
5: 7.0 inch – input 16-point, output 16-point
6: 10.4 inch – input 32-point, output 32-point
❹ I/O connector type
R: Ribbon cable connector
T: Terminal block connector
Product Components
- Logic panel + built in battery
- 7.0 inch: 4 fixing brackets
- 10.4 inch: 6 fixing brackets, CAN connector
- Sold separately: communication cable
Specifications
Supportive interface can be different up to model. Please refer to ‘Ordering Information’ for the supportive interface per model and ‘LP-A Series user manual’ and ‘GP/LP user manual for communication’ for the detailed information about each interface.
Dimensions
- Unit: mm, For the detailed drawings, follow the Autonics website.
-
Fixing bracket
-
Panel cut-out
Software
Visit Autonics web site to download software.
-
atDesigner
atDesigner is for editing project file. -
atLogic
atLogic is for writing and debugging program. -
Recommended computer specification
-
Firmware
Please refer to ‘LP-A Series user manual’ for firmware upgrade.
18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com | +82-2-2048-1577 |
sales@autonics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>