KILOS GEAR WT-F61B Multi Function Camping Fan Instruction Manual

KILOS GEAR WT-F61B Multi Function Camping Fan

Please read this instruction manual carefully before using the product keep it in a safe place

Safety Precautions

1. After purchasing the product, please fully charge it before use
2. lf you don’t use it often, please charge it once every two months to avoid battery damage
3. If there is water or solution into the product, please promptly disconnect the power and put the product in a dry place to dry. product in a dry place to dry before use
4. Keep product out of reach of children and pets
5. Do not disassemble, modify or repair this product yourself
6. Do not put product into or near fire in order to avoid fire and explosion hazard
7. Please stop using it if in the event of abnormal operation
8. To protect the environment, please take out the battery and get the battery to the right recycle place

How To Remove The Battery
Remove the mask screws, remove the mask, top open the rear cover buckle position, remove the rear cover, remove the battery Cover remove the battery
Product Maintenance
Please charging for more than 2 hours after purchasing fan, if don’t need to use fan, please charging it every 2 months to avoid damage to the battery
We appreciated you chose us

How to use this product

Fan Function
Short press the fan button to start the fan working, short press again to upshift the wind gears. The fan will be shut down after short press again on 5th wind gear. Long press the fan button for 5 seconds to shut down all functions including remote control. The remote control can be used if it’s on charging or short press the fan button or light button.
Shaking head function
When the fan is working, short press the oscillating button to start oscillation. Short press again to shut down oscillating and turn back to initial position.
Light Function
There are 3 brightness in the light of this product, short press the light button to turn on, short press 2nd time to raise brightness, short press 3rd time to raise to the strongest brightness, short press 4th time to turn the light off.
Spray Timing

1. introduction of the remote control, press the button in the middle is start the fan working, press the wind speed button·-· and·+· to speed down or speed up.
2. The buttons of the remote control, including wind speeds “.” and R+” and oscillating control must be working after turn the fan on.

NOTE: The remote control can’t be used after stop working for 12 hours, It will be reactivated If you recharge It or short press the fan/light button.
Shaker function

• The gear indicator light is white and weak brightness on 1st wind speed.
• The gear indicator light is white and middle brightness on 2nd wind speed.
• The gear indicator light is white and strong brightness on 3rd wind speed.
• The gear indicator light is white and max brightness on 4th wind speed.
• The gear indicator light is green and middle ever bright on 5th natural wind speed.

Usage Status

• Can be placed
• Suspend able
• Stand able

Function Introduction

1. Rotate to adjust the fan angle
2. Rotate to adjust fan height
3. Carrying handle can be hung
4. Magnetic remote control

Product introduction

Warm Tips
Positioning of brackets and mainframes: Rotate the fixer clockwise to fixed it on the main body, Please makesure the arrowhead of the fixer in face of the arrowhead of the
main body.(lt will be returned to the original passion when the fan is oscillating.)

Specification

FCC Caution.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>