ergotron 24-216-085 WorkFit-C Single LCD Mount User Guide
- June 4, 2024
- ERGOTRON
Table of Contents
ergotron 24-216-085 WorkFit-C Single LCD Mount
Hazard Symbols Review
These symbols alert users of a safety condition that demands attention. All
users should be able to recognize and understand the signifi cance of the
following Safety Hazards if encountered on the product or within the
documentation. Children who are not able to recognize and respond
appropriately to Safety Alerts should not use this product without adult
supervision!
Safety
Important! You will need to adjust this product after installation is
complete. Make sure all your equipment is properly installed on the product
before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are
too easy or difficult or if the product does not stay in desired positions,
follow the adjustment instructions to create smooth and easy movements.
Depending on your product and the adjustment, it may take many turns to notice
a difference. Any time equipment is added or removed from this product,
resulting in a change in the weight of the mounted load, you should repeat
these adjustment steps to ensure safe and optimum operation.
What’s In Box
Tools Required
Installation Instruction
NOTE : Leave enough slack in cable to allow full range of motion.
Caution : To avoid the potential to pinch cables it is important to
follow the cable routing instructions in this manual. Failure to follow these
instructions may result in equipment damage or personal injury.
Adjustment Step
Important! You will need to adjust this product after installation is
complete. Make sure all your equipment is properly installed on the product
before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are
too easy or diffi cult or if the product does not stay in desired positions,
follow the adjustment instructions to create smooth and easy movements.
Depending on your product and the adjustment, it may take many turns to notice
a difference. Any time equipment is added or removed from this product,
resulting in a change in the weight of the mounted load, you should repeat
these adjustment steps to ensure safe and optimum operation. 
- For Warranty visit : www.ergotron.com/warranty
- For Service visit : www.ergotron.com
- For local Customer care phone numbers visit : http://contact.ergotron.com
While Ergotron, Inc. makes every effort to provide accurate tidemaskdBgotposdudrs will not be held liable for any editorial errors or omissions (including those made in the process of translation from English to another language), or for incidental, special or consequential damages of any nature resulting from furnishing this instruction and performance of equipment in connection with this instruction. Ergotron, Inc. reserves the right to make changes in the product design and/or product documentation without notification to its users. For the most current product information, or to know if this document is available in languages other than those herein, please contact Ergotron. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of Ergotron, Inc.,1181 Trapp Road, Eagan, Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>