Yale EF-3PIR Easy Fit Alarm Accessory PIR Motion Detectors Instruction Manual

Yale EF-3PIR Easy Fit Alarm Accessory PIR Motion Detectors

Product Information

The Yale EF-PIR (EF-3PIR) is a wire-free passive infrared motion detector that operates on the 868MHz FM radio frequency. It features a status LED, learn/test button, movement high/low sensitivity, supervision enable/disable jumper, tamper spring, and battery tab. The PIR has two wall-fixing knockouts and four corner-fixing knockouts for easy installation. It has a sleep timer of approximately one minute for power conservation and an LED indicator that flashes for two seconds to indicate low battery, tamper activation, or test mode.

Product Specification

• Environmental conditions: -10c to 40c, relative humidity 85% noncondensing. Indoor use only
• Radio: 868MHz FM
• 2-year guarantee against faulty workmanship, materials, and function from the date of purchase
• Product instructions are available upon request or by visiting the website www.yale.co.uk
• RoHS compliant

Product Usage Instructions

Before installation, program your PIR and test it afterward. Please refer to your current system instruction book for programming instructions.

Product Pack Contents

• Wirefree 868MHz Yale EF-PIR (EF-3PIR) Passive infrared motion detector

Installation

1. Choose a suitable location to install the PIR.
2. Remove the cover screw and the cover to access the jumpers.
3. Set the movement high/low sensitivity jumper to increase or decrease PIR sensitivity to movement based on your preference.
4. If you want to enable supervision, set the supervision enable/disable jumper to “Off”. If you want to disable supervision, set the jumper to “On”.
5. Insert the battery tab to power on the PIR.
6. Secure the PIR to the wall or corner using the fixing knockouts.
7. Test the PIR to ensure proper function.

Operation

The PIR has an automatic sleep timer of approximately one minute for power conservation. After transmitting a detected movement, the PIR will not retransmit for one minute. Any further movement detected within this one- minute sleep period will extend the sleep time by another minute. To temporarily disable the sleep timer, enter test mode as described in the Test Mode section below. Disable the sleep timer temporarily by entering the test mode. See the Test Mode section.

LED Indicator

• Off: Normal operation
• LED flash (2 sec):
  • Detects motion during low battery, tamper activated, or test mode.
  • The spring tamper switch is activated.

Test Mode

To enter test mode, press and hold the learn/test button until the LED indicator flashes. The PIR will not enter sleep mode during testing. To exit test mode, press and release the learn/test button.

Guarantee

This product is guaranteed for consumers against faulty workmanship, materials, and function for a period of 2 years from the date of purchase provided the full installation and maintenance instructions are followed. Please keep your proof of purchase safe, this must be submitted when making a claim under this guarantee. Contact Customer Services on 01902 364647 if there is a fault with the product.

Disposal

Do not dispose of waste electrical products and batteries with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Overview

Description

• • Learn/Test Button
  To enter Test mode: Press once in Standby mode. The LED will light up for two seconds whenever a movement is detected. Test mode lasts for 3 minutes.
  • LED Indicator
  • Knockouts for Wall / Corner Mounting
  • Jumper 2= Supervision Enable / Disable
  • Jumper 3= Movement High/Low Sensitivity
  • Tamper Switch with spring
  • 3x 1.5V AAA Alkaline Battery
  • Top & Bottom Cover securing screw hole

Pack contents

• • 1 x PIR motion detector.
  • 4 x wall plugs & screws.
  • 3 x 1.5V AAA alkaline cells (pre-fitted).

Supervision Enable/Disable Jumper 2

• If enabled, the PIR will automatically transmit Supervisory signals periodically to the Control Panel at random intervals. The Control Panel needs to enable supervision before it can monitor these periodic signals.
• Jumper On= Supervision Disabled (Default)
• Jumper Off= Supervision Enabled

Movement High/Low Sensitivity Jumper 3

• Jumper On= Increase PIR sensitivity to movement
• Jumper Off= Decrease sensitivity (Factory Default)

Programming & installation

Program your PIR before installation and test afterward. Please see your current system instruction book.

Specification

• Environmental conditions:
  -10c to 40c, relative humidity 85% non-condensing. Indoor use only
• Radio: 868MHz FM

2 Year Instruction Statement

This product is guaranteed for consumers against faulty workmanship, materials and function for a period of 2 years from the date of purchase provided the full installation and maintenance instructions are followed. Please keep your proof of purchase safe, this must be submitted when making a claim under this guarantee.

Please note that it is a condition of this guarantee that your Yale product:

• Has been correctly installed and maintained in accordance with the Yale installation and maintenance instructions provided to you at the time of purchase.
• Has not been modified or damaged in any way.
• Has not been subjected to unauthorized repairs.

Yale is responsible under this guarantee for repairing the product or replacing the product as we deem necessary. If there is a fault with the product, please contact Customer Services at 01902 364647, who will give you the name of an expert and confirm what you need to do to make a claim under this guarantee. Please do not carry out any repairs without our authority or by using an unauthorized expert. Any repairs or other works carried out without our authorization or by using an unauthorized expert will not be covered under this guarantee.

This guarantee is non-transferable and applies to products purchased in the United Kingdom only. This guarantee does not apply to normal wear and tear. This does not affect your statutory rights. A full copy of the product instructions is available upon request or by visiting our website www.yale.co.uk.

WEEE

Note:
Waste electrical products and batteries should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

www.yale.co.uk.

References

• YaleHome | Protect Your Home The Smarter Way With Yale

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>