Qolsys QS9014-840-00-02 – IQ Control Panel Instructions
- June 10, 2024
- Qolsys
Table of Contents
TECHNICAL SERVICE BULLETIN
Instructions
QS9014-840-00-02 – IQ Control Panel
IQ PANEL 4 – 4.0.1 SOFTWARE UPDATE – RELEASE NOTES AND INSTRUCTIONS
TSB #: 211028
DATE: 10/28/21
RE: IQ PANEL 4 – 4.0.1 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS
Release Notes:
New Features:
- Local Dealer branding (Logo, Help Videos & On-Screen Billboard) can now be loaded directly to the Panel via the built-in access point from any mobile device. This replaces the need to use an SD Card for Dealer branding
- Improved flow for local Software Update via Panel Access Point, including QR code scanning to auto connect to the network
- New user interface changes to encourage Wi-Fi connectivity and to help panels stay connected over time to the network
- Added Panel configuration support in advance of the pending release for IQ WiFi 6
Fixes/Improvements:
- Fixed an issue in 4.0.0 related to S2 versions of Linear Garage Door Openers. See TSB 210927 for additional detail: https://dealers.qolsys.com/wp-content/uploads/2021/09/TSB-210927-Linear-ZWave-GDOIncompatibility-261-REVISED.pdf
- Enhancements to Two-Way Voice audio analytics and default settings
- Changed Severe Weather Siren notification to be unique from other types of notifications
NOTE: The first time the system is powered on, it will automatically
reboot before the Installation Wizard starts.
This is expected as part of the initial system configuration process and will
not occur again unless you perform a master reset (factory default).
Update Instructions:
Compatibility Note: Your IQ Panel must be on software version 4.0.0 or higher and connected to Wi-Fi to install this update wirelessly.
- Swipe down from the top of the screen and touch “Settings”
- Touch “Advanced Settings”
- Enter a valid installer code (default is 1111)
- Touch “Upgrade Software”
- Touch “Patch Tag” and enter the patch iqpanel4.0.1 then touch OK
- Touch “Upgrade Using Network” (panel must be connected to Wi-Fi). Update will download and install
- Once complete touch “OK” to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.
Read User Manual Online (PDF format)
Loading......