HONOR ARG-B39 Smart Watch User Guide

: June 10, 2024
: Honor

Table of Contents

ARG-B39 Smart Watch
Product Information
Product Usage Instructions
Charging
Disposal and recycling information
EU regulatory conformance
FCC Regulatory Compliance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ARG-B39 Smart Watch

HONOR-ARG-B39-Smart-Watch-PRODUCT-IMAGE

Product Information

The Akilli band ARG-B39 is a smart band that can track your heart rate and other fitness activities. It has a button, a screen, a charging port, a heart rate sensor, and a quick release feature. The device can be charged using a charging dock that needs to be connected to a power supply. The device is compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries regulations.

Product Usage Instructions

Charging: Connect the metal contacts on the charging dock to those on the back of the device, then put them on a flat surface. Connect the charging dock to a power supply, the device’s screen will light up and display the battery level. Wipe the port, metal contacts, and the device dry during charging.
Button: Press and hold the button to power on, power off, or restart the device.
Heart rate sensor: The device has a heart rate sensor that can track your heart rate during exercise or other activities.
Quick release: The device has a quick release feature that allows you to easily remove it from your wrist.
Downloading app: Scan the QR code to download and install the app for managing the device.
Blasting Caps and Areas: Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off two-way radios or electronic devices to avoid interfering with blasting operations.
Areas with flammables and explosives: Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives.
Disposal and recycling information: The device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment. For declarations of conformity about REACH and RoHS, please visit our website: https://www.hihonor.com/global/legal/certification/.

Charging

Connect the metal contacts on the charging dock to those on the back of the device, then put them on a flat surface. Connect the charging dock to a power supply, the device’s screen will light up and display the battery level . HONOR-ARG-B39-Smart-Watch-01

1| Button
Press and hold the button to power on, power off, or restart the device.
---|---
2| Screen
3| Charging port
4| Heart rate sensor
5| Quick release

Wipe the port, metal contacts, and the device dry during charging.

Downloading app
Scan the QR code to download and install the app for managing the device .

Copyright © Honor Device Co., Ltd. 2021. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

Trademarks and Permissions
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is under license.
Other trademarks, product, service and company names mentioned may be the property of their respective owners.

Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at https://www.hihonor.com/privacy-policy/worldwide/.

Blasting Caps and Areas
Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.

Areas with flammables and explosives
Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols. Do not store or transport the device in containers with flammable liquids, gases, or explosives.

Operation and safety

Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.
Ideal temperatures are -10°C to +45°C.
Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
The device has a built-in, non-removable battery, do not attempt to remove the battery, otherwise the device may be damaged.
When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.
Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device.
This product is not designed to be a medical device, and is not intended to diagnose, treat, cure or prevent any disease. All data and measurements should be used for personal reference only.
If you experience skin discomfort when wearing the device, take it off and consult a doctor.
Wipe the charging port dry before charging.
Adult supervision is advised if children are to use or come into contact with this product.
Switch off your wireless device when requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker.
If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
To prevent damage to your device’s parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments or near magnetic fields.
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
If the battery leaks, ensure that the electrolyte does not make direct contact with your skin or eyes. If the electrolyte touches your skin or splashes into your eyes, immediately flush with clean water and consult a doctor.
Wireless devices may interfere with the airplane’s flight system. Do not use your device where wireless devices are not allowed according to the airplane company’s regulations.
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
Ensure that the power adapter meets the requirements of Clause Q.1 in IEC62368-1/EN62368-1 and has been tested and approved according to national or local standards.
Protect the wearable and its accessories from strong impact, strong vibration, scratches, and sharp objects, these may damage the device.
Make sure that the wearable and its accessories stay clean and dry. Do not wear the wearable too loosely or tightly during workouts. Clean your wrist and device after the workout. Rinse and dry the device to clean it before putting it back on.
If the wearable is built for swimming and showering, make sure to regularly clean the strap, dry your wrist and the device before wearing it again.
Use the radio equipment in good reception conditions to reduce the amount of radiation received.
Keep radio equipment away from the belly of pregnant women.
Keep radio equipment away from the lower abdomen of teenagers.
Respect of the restrictions of use specific to certain places (hospitals, planes, service stations, schools …).

Disposal and recycling information

The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website https://www.hihonor.com/.

Reduction of hazardous substances
This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site https://www.hihonor.com/global/legal/certification/.

EU regulatory conformance

RF exposure requirements
Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits established by the European Commission for exposure to radio waves.

Statement
Hereby, Honor Device Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at https://www.hihonor.com/global/legal/certification/.
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.

Frequency bands and power

(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.
(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard.
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Bluetooth: 10 dBm.

Accessories and Software Information
It is recommended that the following accessories should be used:

Charging dock: POWER-CA030
The product software version is 1.1.0.1
Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules.
All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at: https://www.hihonor.com/global/legal/certification/.
Please visit https://www.hihonor.com/global/support/ for recently updated hotline and email address in your country or region.
Please go to Settings > About > Regulatory Information on the device to view the E-label screen.

Disposal and recycling information(India) This symbol on the device or on its packaging indicates that the device (including its electrical accessories) should not be disposed of as normal household garbage.
Do not dispose this product with Regular Household, Dry and Wet Waste. If you wish to discard this product, please contact on the details below and follow the correct method of disposal as guided:
E-mail: customersupport@innocom.in Service Hotline: 1800 258 8110

For further information, log on to: https://www.hihonor.com/.

Official Recycling Partner:

ATTERO Recycling Pvt. Ltd.
ATR Traders Private. Ltd. info@attero.in
info@atr.com

Reduction of hazardous substances(India)
This device is compliant with the E-Waste (Management) Rules, 2016 and does not contain hazardous substances regulated by the Rules except for the applications of exemption.

Battery BIS details

IS 16046 (Part 2): 2018/ IEC 62133-2:2017 R-41179183 www.bis.gov.in

IS 16046 (Part 2): 2018/ IEC 62133-2:2017

R-41179191 www.bis.gov.in

IS 16046 (Part 2): 2018/ IEC 62133-2:2017

R-41181404 www.bis.gov.in

FCC Regulatory Compliance

RF exposure requirements
Important safety information regarding radio frequency (RF) radiation exposure:
RF exposure guidelines require that the device should be used for wrist. Failure to observe this guideline may result in RF exposure exceeding limits.

FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications to this device not expressly approved by Honor Device Co., Ltd. for compliance could void the user’s authority to operate the equipment.