LG SQ-C2WA6555 Gallery Stand Owner’s Manual

LG SQ-C2WA6555 Gallery Stand

Product Information

This is the owner’s manual for the following product models:

• SQ-C2WA6555
• SQ-C2SA6555
• SQ-C2SA77
• SR-C3SA6555
• SR-C3SA77

The product comes with a stand and accessories such as a cable
cover and cable holder (depending on the model). The model name,
width, depth, height, and weight of the product are as follows:

Usage Instructions

Please read the safety precautions and instructions carefully before using the product.

Assembling and Preparing

Here are the steps to assemble the stand:

1. Place the product on a flat floor with its screen facing downward. Put a soft and fluffy cloth on the place, and then put the product screws are attached.

2. Tighten the screws with appropriate force to prevent the product from tilting or tipping over. Do not over-tighten the screws as this may cause them to come off. Do not use oil or lubricant on the screws.

3. Assemble the stand by conducting the method in reverse order.
   If you have a swivel stand, follow these additional steps:

4. Attach the cable cover and cable holder provided as TV accessories (depending on model).

5. Make sure to use a cabinet or shelf that is appropriate for the product’s weight and size.

6. Place the product on a flat surface for smooth rotation. Users who are not professional installation staff can also adjust the product’s balance during rotation.

Note : Do not touch the swivel stand while it is rotating as your hand or fingers may get caught, causing injury or damage to the cable and product.

Accessories

How to Assemble the Stand

• When assembling the stand, put the product on a table or a flat floor with its screen facing downward. Here, first put a soft and fluffy cloth on the place, and then put the product on top of it to prevent the screen from being damaged.
• When assembling the stand, ensure that all of the provided screws are attached. If the screws are not fully tightened, the product may tilt or tip over, resulting in damage. Tightening the screws with excessive force may cause them to come off due to abrasion of the screw joint.
• When assembling the product, do not use foreign substances (oil, lubricant, etc.) on the screws.
  • It may cause damage to the product.
• Before installing a wall mount support, disassemble the Stand by conducting the method to assemble the stand in a reverse order

The cable cover and cable holder are provided as TV accessories. (Depending on model)

Mounting on a Table

If you want to mount the product on a table, follow these steps:

1. Place the product on a flat surface.
2. Connect the power cord to a wall outlet.
3. Lift and tilt the TV into its upright position on a table.
4. Leave a 10 cm (minimum) space from the wall for proper ventilation
5. Connect the power cord to a wall outlet.
6. Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
7. If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
8. Do not use any unapproved items to ensure the safety and product life span.
9. Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s warranty.
10. Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
11. Only use the authorized stand and wall mounting bracket made specifically for LG products.
12. Pursuant to Consumer Protection Law, LG Electronics will not be held responsible for any product malfunction, material damage or injury caused by using products not authorized by LG Electronics.

In case of Swivel Stand

• Make sure the TV is level.
• If there is a problem with swivel angle adjustment, lift the product slightly and put it back down.
• It is safe to install the product according to the installation method to prevent the damage to the product or personal injury even if the product is pulled forward.
• Allow sufficient space around the product. Otherwise, it may lose its balance during rotation and fall, causing injury or product damage. Make sure to use a cabinet or shelf that is an appropriate size for the product.
• When rotating the TV, make sure there are no objects around it, and place the product on a flat surface for smooth rotation. Users who are not professional installation staff can also adjust the angle.
• When adjusting the angle, be careful not to get your fingers caught. This may cause injury to your hand or fingers. Excessive tilting may cause the product to fall and result in injury.
• Be careful not to pull the cable when rotating the TV. It may cause damage to the cable and product.

Securing the TV to a Wall

If you want to secure the product to a wall, follow these steps:

1. Mount the wall brackets with bolts to the wall.
2. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note : Pursuant to Consumer Protection Law, LG Electronics will not be held responsible for any product malfunction, material damage, or injury caused by using products not authorized by LG Electronics.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

2. If there are bolts inserted at the eye-bolts position, remove the bolts first.

3. Mount the wall brackets with the bolts to the wall.
   Match the location of the wall bracket and the eye-bolts on the rear of the TV.

4. Connect the eye-bolts and wall brackets tightly with a sturdy rope.
   Make sure to keep the rope horizontal with the flat surface.

5. Use a platform or cabinet that is strong and large enough to support the TV securely.

6. Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer

Specifications

The model and serial number of the product are located on the back and one side of the product. Please record them below in case you ever need service.

• Model:

• Serial No.:

Image shown may differ from your product.

470 X 230 X 162

| ****

1.9

SQ-C2SA77 SR-C3SA77| ****

520 X 267 X 162

| ****

3.6

Safety instructions

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance Please read these safety precautions carefully before using the product.

• When lifting or moving the product, at least two people are required due to the heavy weight of the product.
  • The product may fall down, causing a malfunction or injury.
• Do not let children hang on or climb onto the product.
  • The product may fall down, causing an injury or even death.
• Do not install the product in a place which is unstable or vibrating or a place where the product is not completely supported such as a shaky shelf or a tilted place.
  • The product may fall down or overturn, causing an injury or malfunction.
• Put the product on a flat and firm floor.
• When moving or handling a product assembled with the Stand, be cautious about damaging the exterior of the product.
• When there is a stain or fingerprint left on the surface, wipe it off gently.
  • When removing a stain, do not use excessive force. Wiping with excessive force may cause scratches or discoloration on the product

The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.

• Model
• Serial No.

References

• LG Electronics & Home Appliances | Shop Now | LG USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>