RTR BIKES R910499 Ride Brutus Bike Holder Instruction Manual

: June 10, 2024
: RTR BIKES

Table of Contents

RTR BIKES R910499 Ride Brutus Bike Holder
INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RTR BIKES R910499 Ride Brutus Bike Holder

RTR BIKES R910499 Ride Brutus Bike Holder-fig1

Product Information

The product is called Brutus Up and is manufactured by RTRBIKES.COM. It comes with multiple components labeled A to M, with some components having multiple quantities.

List of Components:

A x2
B
C x4
D x4
E
F x4
G
H x2
I
J x24
K x9
L x2
M x1

Product Usage Instructions

Before assembling the product, ensure that all components are present and in good condition.

Start by assembling component A. Take two A components and attach them to each other using the provided screws with a 5 mm diameter.
Attach component B to the assembled A components using the provided screws with a 5 mm diameter.
Attach four C components to the bottom of the assembled structure using the provided screws with a 5 mm diameter.
Attach four D components to the top of the assembled structure using the provided screws with a 5 mm diameter.
Attach component E to the top of the assembled structure using the provided screws with a 5 mm diameter.
Attach four F components to the bottom of component E using the provided screws with a 5 mm diameter.
Attach components I and J to the assembled structure using the provided screws with a 5 mm diameter. Use 24 J components and one M component.
Attach eight H components to the assembled structure using the provided screws with a 5 mm diameter.
Attach component K to the top of the assembled structure using the provided screws with a 5 mm diameter. Use nine K components.
Attach component L to the top of component K using the provided screws with a 3 mm diameter.
Attach component G to the bottom of component L using the provided screws with a 5 mm diameter.
After assembling the product, ensure that all screws are tightened and secure. The maximum height of the product should not exceed 2 cm. For further assistance or troubleshooting, refer to the product manual or contact RTRBIKES.COM.