Wellis Crystal Spa Cleaner User Manual
- June 10, 2024
- Wellis
Table of Contents
Crystal Spa Cleaner User Manual
Spa Cleaner has been specially designed for cleaning your pipes and your spa pool. It dissolves calciumand remaining dirt in your lines. We advise to use Spa Cleaner every time you change the water, we recommend to do this every three months. Spa Cleaner is environmentally friendly and bio-degradable.
User manual:
- Add 250 ml of Spa Cleaner to your spa, 24 hours before changing the water.
- Make sure all jets and valves are open, and switch on the pumps at full power for 15 minutes. Repeat this 3 times, with enough time in between.
- Remove the filter before you drain your spa water.
- Clean the filter with Wellis Crystal Filter cleaner.
- Rinse out the spa with clean water.
- Fill your spa, and place the clean filter back.
- Resume your normal water treatment schedule with Wellis Crystal All in one Water treatment.
Ingredients:
- Hydrogen Peroxide . . . . . . . . <5%
- Water . . . . . . . . . . . . . . . >95%
Cautions:
Keep out of reach from children
Don’t inhale and swallow
100% bio-degradable
1L
Shelf life: 2 Years
MSZ EN 902: 2016
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>