JARVIS LIGHTING SCRT-320 Series Petroleum Canopy LED Retrofit Kit Instructions
- June 10, 2024
- JARVIS LIGHTING
Table of Contents
SCRT-320 Series
Petroleum Canopy LED Retrofit Kit
*LSI Scottsdale Retrofit**
SCRT-320 Series Petroleum Canopy LED Retrofit Kit
| Jarvis SCRT Series | Competitors’ Products |
|---|---|
| Fastest canopy retrofit installation in the industry | Complicated design slows |
installation increasing setup costs
Pressure equalization system eliminates gasket fatigue| Gaskets experience
pressure cycling and can fail over time
Glass lens never yellow| Plastic lens yellows over time
Most Popular Models and Specifications:
Model| LEDs| INPUT| POWER| LUMENS| CCT|
CRI| PF
---|---|---|---|---|---|---|---
SCRT-320| 4| 120-277V 50/60Hz| 107W| 14,680 elm| 5000K| ≥ 72| ≥ 0.9
Electrical
Input Voltage: 120-277V.
Power Factor: >.9 at full load.
Dimming Capability: Features 0-10V Dimming
Total Harmonic Distortion: <20% full load.
Includes over voltage protection, over current protection, and short circuit
protection.
Operating Temperature Range: -40° C to 40° C Ambient (-40°F to 104°F).
Over Temperature Protection: Power supply automatically reduces power level
when operating in higher temperatures to ensure componentry does not overheat.
Full power levels are resumed automatically when temperatures return to rated
operating range.
Retrofit System
The SCRT-320 is designed to retrofit into existing LSI Industries, Inc.
Scottsdale light fixtures. The kit consists of an LED optical unit, a power
supply with mounting cover, and some wiring accessories. The LED optical unit
is sized similar to the existing fixture’s glass lens. The power supply cover
is sized to fit over the existing ballast compartment.
During the retrofit process, the existing fixture is left in place. From above
the existing Scottsdale, the existing ballast is removed, two wires are
dropped down through the fixture body, and the new power supply with cover is
snapped in place. From below the existing fixture, the lens frame is swung
down, the old glass, lamp, reflector and socket are removed, the new LED unit
is set in place and wires are connected. The lens frame (now holding the new
LED optical unit) is snapped back into position and installation is complete.
Contact a Jarvis Representative for full installation instructions, videos or
additional information.
Construction and Materials
Retrofit kit LED optical unit and driver cover are manufactured from 5052 alloy
aluminum.
Optical unit features a powder coat finish with UV protection to ensure
longevity of color. Powder coat finish is applied directly to aluminum housing
and will not crack or peel. Standard color is white. Bronze and other colors
are available. Contact factory for additional color information.
Rear of optical unit features an electrochemically applied thermal coating to
enhance heat transfer, ensuring cool operation of LEDs for optimal efficiency
and lifetime.
Optical unit is constructed with a reflective-coated internal reflector.
Lens is constructed from high-clarity prismatic tempered glass.
Optical unit is sealed and features a hydrophobic vent to equalize pressure
and reduce gasket fatigue due to thermal cycling.
Fasteners are stainless-steel and will not rust or create rust-streaks.
Luminaire is manufactured in the US of US and Imported Parts.
Regulatory and Voluntary Qualifications
ETL Classified to UL1598C and UL8750 for both US and Canada.
American Recovery and Reinvestment Act Funding Compliant.
State of California Title 24 Compliant when installed in accordance with local
requirements.
Design Lights Consortium® (DLC) qualified product. Not all versions of this
product may be DLC qualified. Please check the DLC Qualified Products List at
www.designlights.org/QPL to confirm which
versions are qualified.
Rated for Wet and Dry Locations.
Warranty and Lifetime
SCRT-320 carries a 10-year warranty. Contact Jarvis representative for
details.
Projected LED lifetime exceeds 75,000-100,000 hours under most operating
conditions. Lifetime projections are calculated using data including
LM-79, LM-80 and TM-21 calculations. Contact Jarvis representative for
details.
Photometrics
Photometric information, including LM-79 reports and .IES files are available
for most models at www.jarvislighting.com.
Site photometrics and lighting layouts are available. Contact a Jarvis
representative.
Dimensions:
BRIGHT DONE RIGHT™
www.jarvislighting.com
800-363-1075
Documents / Resources
|
JARVIS LIGHTING SCRT-320 Series Petroleum Canopy LED Retrofit
Kit
[pdf] Instructions
SCRT-320 Series Petroleum Canopy LED Retrofit Kit, SCRT-320 Series, Petroleum
Canopy LED Retrofit Kit, Canopy LED Retrofit Kit, LED Retrofit Kit, Retrofit
Kit, Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>