WISeNeT PNM-9084RQZ Network Camera User Manual
- June 10, 2024
- WISeNeT
Table of Contents
WISeNeT PNM-9084RQZ Network Camera
Product Information – NETWORK CAMERA
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth. (Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.)
- Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/ accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lighting storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- This product is intended to be supplied by a Listed Power Supply Unit marked Class 2 or LPS and rated from 12 Vdc, 3.2 A or PoE(55 Vdc), 0.77 A. (PNM-9084RQZ)
- This product is intended to be supplied by a Listed Power Supply Unit marked Class 2 or LPS and rated from 12 Vdc, 3.5 A or PoE(55 Vdc), 0.82 A. (PNM-9085RQZ)
- Do not use DC power and HPoE injector at the same time.
- This product is intended to be supplied by isolation power.
Product Usage Instructions
- Change your password every three months to safely protect personal information and to prevent the damage of the information theft. Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
- Follow the manufacturer’s instructions for installation.
- Do not use this apparatus near water.
- Use a soft, dry cloth or damp cloth to clean the contaminated area on the product surface.
- Do not use a detergent or cosmetic products that contain alcohol, solvents, surfactants or oil constituents as they may deform or cause damage to the product.
- Do not block any ventilation openings.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug.
- Protect the power cord from being walked on or pinched.
- Use only attachments/ accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
- Unplug this apparatus during lighting storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel.
- Supply with a Listed Power Supply Unit marked Class 2 or LPS and rated from 12 Vdc, 3.2 A or PoE(55 Vdc), 0.77 A. (PNM-9084RQZ) or 12 Vdc, 3.5 A or PoE(55 Vdc), 0.82 A. (PNM-9085RQZ) as intended.
- Do not use DC power and HPoE injector at the same time.
- Supply with isolation power.
NETWORK CAMERA
User Manual
PNM-9084RQZ/PNM-9085RQZ PNM-9084RQZ1/PNM-9085RQZ1
Network Camera User Manual
Copyright ©2022 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark Each of trademarks herein is registered. The name of this product
and other trademarks mentioned in this manual are the registered trademark of
their respective company.
Restriction Copyright of this document is reserved. Under no circumstances,
this document shall be reproduced, distributed or changed, partially or
wholly, without formal authorization.
Disclaimer Hanwha Techwin makes the best to verify the integrity and
correctness of the contents in this document, but no formal guarantee shall be
provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Hanwha Techwin reserves the right to change the
contents of this document without prior notice. Design and specifications are
subject to change without prior notice. The initial administrator ID
is”admin”and the password should be set when logging in for the first time.
Please change your password every three months to safely protect personal
information and to prevent the damage of the information theft. Please, take
note that it’s a user’s responsibility for the security and any other problems
caused by mismanaging a password.
OVERVIEW
overview
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean the contaminated area on the product surface with a soft, dry cloth
or a damp cloth. (Do not use a detergent or cosmetic products that contain
alcohol, solvents or surfactants or oil constituents as they may deform or
cause damage to the product.)
7. Do not block any ventilation openings, Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/ apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. This product is intended to be supplied by a Listed Power Supply Unit
marked “Class 2” or “LPS” and rated from 12 Vdc, 3.2 A or PoE(55 Vdc), 0.77 A.
(PNM-9084RQZ)
16. This product is intended to be supplied by a Listed Power Supply Unit
marked “Class 2” or “LPS” and rated from 12 Vdc, 3.5 A or PoE(55 Vdc), 0.82 A.
(PNM-9085RQZ)
17. Do not use DC power and HPoE injector at the same time.
18. This product is intended to be supplied by isolation power.
19. If you use excessive force when installing the product, the camera may be
damaged and malfunction. If you forcibly install the product using non-
compliant tools, the product may be damaged.
20. Do not install the product in a place where chemical substances or oil
mist exists or may be generated. As edible oils such as soybean oil may damage
or warp the product, do not install the product in the kitchen or near the
kitchen table. This may cause damage to the product.
21. When installing the product, be careful not to allow the surface of the
product to be stained with chemical substance. Some chemical solvents such as
cleaner or adhesives may cause serious damage to the product’s surface.
22. If you install/disassemble the product in a manner that has not been
recommended, the production functions/ performance may not be guaranteed.
Install the product by referring to “Installation & connection” in the user
manual.
23. Installing or using the product in water can cause serious damage to the
product. 24. This model should be mounted horizontally.
If mounted vertically, the camera might be damaged due to malfunction.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION
GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to
dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus. To prevent injury, this apparatus must be
securely attached to the Wall/ceiling in accordance with the installation
instructions.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
English _3
overview
Class construction
An apparatus with CLASS construction shall be connected to a MAINS socket
outlet with a protective earthing connection.
Battery
Batteries(battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Disconnection Device
Disconnect the main plug from the apparatus, if it’s defected. And please call
a repair man in your location. When used outside of the U.S., it may be used
HAR code with fittings of an approved agency is employed.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION
IL Y A RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE
TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX
INSTRUCTIONS. These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to do so. Please use the input power with just one camera and
other devices must not be connected. The ITE is to be connected only to PoE
networks without routing to the outside plant. The wired LAN hub providing
power over the Ethernet (PoE) in accordance with IEEE 802.3bt shall be a UL
Listed device with the output evaluated as a Limited Power Source as defined
in UL60950-1. Unit is intended for installation in a Network Environment 0 as
defined in IEC TR 62102. As such, associated Ethernet wiring shall be limited
to inside the building.
4_ overview
Please read the following recommended safety precautions carefully. y Do not
place this apparatus on an uneven surface. y Do not install on a surface where
it is exposed to direct sunlight, near heating equipment or
heavy cold area. y Do not place this apparatus near conductive material. y Do
not attempt to service this apparatus yourself. y Do not place a glass of
water on the product. y Do not install near any magnetic sources. y Do not
block any ventilation openings. y Do not place heavy items on the product. y
Please wear protective gloves when installing/removing the camera.
The high temperature of the product surface may cause a burn. y Do not adjust
or move the lens directly with your hands. Doing so could damage the lens or
degrade its performance. y The life expectancy of driving the lens motor is
200 rotations. y To move the location of your camera, privacy masking needs to
be reset.
User’s Manual is a guidance book for how to use the products. The meaning of
the symbols are shown below. y Reference : In case of providing information
for helping of product’s usages y Notice : If there’s any possibility to occur
any damages for the goods and human caused by
not following the instruction Please read this manual for the safety before
using of goods and keep it in the safe place. We do not guarantee the quality
of third-party products (e.g. lenses, accessories) that you separately
purchase. In particular installation environments, there might be interference
in radio communications. When interference of electromagnetic waves occurs
between the product and radio communication device, it is recommended to keep
a certain distance between the two or change the direction of the receiving
antenna.
WARNING
To Prevent damage which may caused by IR LED, don’t stare at operating lamp.
For below models only.
PNM-9084RQZ/PNM-9085RQZ
Risk Group 1
WARNING IR emitted from this product.
Do not stare at operating lamp.
Product tested against IEC 62471
OVERVIEW
CONTENTS
OVERVIEW 3
6
36 6
7
8
Important Safety Instructions Recommended PC Specifications Recommended Micro SD/SDHC/SDXC Memory Card Specifications What’s Included Optional Accessories for Installation At a Glance
INSTALLATION & CONNECTION
10
10 Installation 16 Connecting with other Device
NETWORK CONNECTION AND SETUP
19
19 Connecting the Camera Directly to Local Area Networking
19 Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
20 Using Device Manager 20 Automatically searching camera 20 Configuring IP
address 21 Manually registering camera 21 Automatically configuring IP 22 Port
Range Forward (Port Mapping) Setup 23 Connecting to the Camera from a Shared
Local PC 23 Connecting to the Camera from a Remote
PC via the Internet
WEB VIEWER
24
24 Connecting to the Camera 25 Password setting 25 Login 25 Camera Web Viewer Setup
APPENDIX
26
26 Troubleshooting 27 Open Source Announcement
English _5
overview
RECOMMENDED PC SPECIFICATIONS
· CPU : Intel(R) Core(TM) i7 3.4 GHz or higher · RAM : 8G or higher ·
Recommended browser: Chrome · Supported browsers: Chrome, Safari, Firefox, MS
Edge(chromium based) · Supported OS : Windows, Mac, Linux, Android, iOS,
Chrome · Verification environment
– Windows 10: Google Chrome version 80 or later, Firefox version 72 or later,
MS Edge version 83 or later – Mac 10.13/14: Safari version 11.0.1 or later The
video play performance of the web viewer depends on the performance of the
user’s CPU and GPU.
RECOMMENDED MICRO SD/SDHC/SDXC MEMORY CARD SPECIFICATIONS
· Recommended capacity : 16GB ~ 256GB(MLC type) · Recommended Manufacturers :
SanDisk, Transcend · Product Type : High endurance · The compatibility varies
depending on the card manufacturers and types. · It is recommended to use a
memory card of 16GB or more that conforms to the UHS-3 class (MLC type)
specification.
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package. (As for each sales country, accessories are not the same.)
Appearance
Item Name
Quantity
Description
Camera
1
Quick Guide (Optional) Template Power Terminal Block Power Cable Machine Screws Cap Installer
1
1
Product installation guide
1
Plugged in the power plug
1
Used to plug into the power port
4
Screws used for mounting your camera on the hanging mount, GangBox, etc.
1
Used to connect the RJ45 cable.
CRoAaf tUtehTdeIOVpNoolw:taBegreecwaoannrdneePocoftiltoahnrei.ty
6_ overview
OVERVIEW
Appearance
PoE INJECTOR
LAN
PoE
ACTIVE POWER
Item Name Drill bit
Cable bush HPoE injector Audio/alarm cable
Quantity 1
Description
Used for dome cover disassembly, assembly and camera installation.
1 Spare bushes for Lan cables or alarm & audio cables.
1
OPTIONAL ACCESSORIES FOR INSTALLATION
You can purchase appropriate optional accessories available.
Product type Model Name
Wall mount SBP-390WMW2
1
Connects power supply and network
1
Used to connect with the audio and alarm port
Product type Model Name
Hanging mount SBP-317HMW
Ceiling mount SBP-300CMW
Product type Model Name
Corner mount SBP-300KMW
Pole mount SBP-300PMW
English _7
overview
AT A GLANCE
Appearance
a b c
Item
a Dome cover b Camera body c Mount plate
Description Case cover used to protect the lens and the main unit.
Body part where the camera lens and connection terminals are included.
Plate that fixes the camera when mounting it to the ceiling or attaching it to
a separately sold mount.
Components
a
g
b
c
d
h
e
i f
Item
a Lens b Illumination Sensor c Micro SD Memory Card
Compartment
d IR LED
e Reset Button
f HPoE Connection port
Description
4 camera lenses show different directions.
Detects incoming light to control the IR LED.
Compartment for the Micro SD memory card.
These infrared LED’s are controlled by the illumination sensor.
The button restores all camera settings to the factory default. Press and hold
for about 5 seconds to reboot the system. J If you reset the camera, the
network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device
Manager program to change the basic network settings such as IP address,
Subnet mask, Gateway, etc., before you can connect to the network.
This terminal connects power and network via HPoE injector or connects to
network via ethernet cable.
8_ overview
Item
Description
g Cables
Color – CH 1: Red CH 2: Green CH 3: Blue CH 4: Black
ARM-IN ARM-OUT
h Audio and alarm cable port GND
MIC SPEAKER
Used to connect the alarm input sensor or external day/night sensor. Used to connect the alarm output signal. These are common ports to connect alarm input/output signals. Used to connect to a microphone. Used to connect to speakers.
i Power Port
Port for power terminal block.
English _9
OVERVIEW
installation & connection
INSTALLATION
J ` This camera is waterproof and in compliance with the IP66 spec, but the
jack connected to the external cable is not. You are recommended to install
this product below the edge of eaves to prevent the cable from being
externally exposed.
Precautions before installation
Ensure you read out the following instructions before installing the camera: ·
Select an installation site that can hold at least 5 times the camera’s
weight. · Stuck-in or peeled-off cables can cause damage to the product or a
fire. · For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case. · If the
product is installed with excessive force, it may cause damage to the camera
due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
Disassembling
1. Remove the dome cover by loosening the fastening bolt of the dome cover.
This can be done by turning it counterclockwise using the drill bit provided.
Dome cover
2. Loosen the fastening screw on the camera body.
J ` Do not adjust or move the lens directly with your hands. Doing so could
damage the lens or degrade its performance.
3. Remove the camera body and mounting plate by pulling the plate spring, as
shown in the figure.
10_ installation & connection
INSTALLATION & CONNECTION
Inserting a Micro SD Memory Card
1. Remove the dome cover of the camera. 2. Insert a Micro SD card in the
arrow direction shown in the figure.
Removing a Micro SD Memory Card
Gently press down on the exposed end of the memory card as shown in the
diagram to eject the memory card from the slot.
J Disconnect the power cable from the camera before inserting the Micro SD memory card.
Do not forcefully insert it in the reverse direction. It might damage your
Micro SD memory card and your product.
When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
Disassembly of the product cover should be finished within 5 minutes, or
there will be the risk of internal dew condensation.
` If your camera’s IR LED blocks the Micro SD slot, access the web viewer and
move the lens not to block the slot.
J You should save an SD card for each channel.
Please note that if you firmly push and release the Micro SD memory card
when it is ejected, it may pop out.
Before removing the Micro SD memory card, in <Setup ( )>-<Event>-<Storage>, set the device to <Off> and press the [Apply] button and turn the camera off.
If you turn off the camera or remove the Micro SD memory card that contains
data from the product, the data may be lost or damaged.
English _11
installation & connection
Installation (mount plate)
[Directly installing on ceiling] 1-1. Attach the installation template on the
desired surface and drill
holes for screws and cables.
1-2. Fix the mount plate using appropriate screws.
1-3. Pull out necessary cables among Power / LAN / audio & alarm cables
through the hole in the mount plate.
12_ installation & connection
[Installing using pipe] 2-1. Attach the installation template and drill holes
for screws
and cables. 2-2. Separate the pipe cover of the mount plate by pressing its
sides.
2-3. Place the pipe on the mount plate.
2-4. Fix the mount plate using appropriate screws.
2-5. Pull out necessary cables among Power / LAN / audio & alarm cables
through the pipe.
INSTALLATION & CONNECTION
[Attaching to the unbundled adapter] Choose and purchase a necessary one of
the following options (unbundled) that is suitable to the installation site or
for your convenience.
3-1. Install the hanging mount to the wall mount adapter. ` Wall mount
adapters and hanging mounts are sold separately.
Installation (camera body and dome cover)
1. Connect the safety cable.
2. Mount the camera body to the mount plate. ` Mount it to fit the hinges as shown in the image.
3-2. Connect the mounting plate and the hanging mount.
3. Open the cable cover on the camera body.
4. Connect the terminals inside the camera with the necessary cables, and
then close the cable cover.
English _13
installation & connection
5. Push the leaf spring until it clicks into place as shown in the figure.
6. Using the fastening screws on the camera body, fix the camera body to the
mount plate.
7. Assemble the dome cover. Align the arrows when assembling the dome cover.
To ensure there are no issues with waterproofing, tighten the
fastening bolts tightly using the drill bit.
14_ installation & connection
Connecting waterproof power cable and LAN cable
J ` Use an appropriate cable bush for the LAN cable to be connected. – Basic
camera : Use the cable with a diameter of Ø5~6.5. – Components provided : Use
the cable with a diameter of Ø7~8.5. [Method 1. Installing LAN/power cables]
- Pull off the extruded parts of the bush to be used as shown in
the figure.
2. Pass the LAN cable through the big hole in the bush. 3. Remove the sheath with a cable cutter, and align the cables. 4. Connect the LAN cable with a LAN connector, and insert it into the LAN
tool.
5. Connect the finished cable to the HPoE port.
6. Route the power cable through the small hole of the bush and connect it to the provided terminal block.
[Method 2. Installing the LAN cable (using HPoE injector)] 1. Pull off the
extruded part of the 1-hole bush provided. 2. Use the cap installer to pass
through the LAN cable.
3. Mount the bush to the camera body.
4. Connect the LAN cable to the HPoE port.
Installing audio & alarm cables
1. Mount the bush of the provided audio & alarm cables to the camera body.
2. Connect the audio & alarm cable to the ALARM/AUDIO terminal.
Outdoor installation
When you install it outside of the building, please waterproof it with
waterproof butyl rubber tape (can be purchased in stores) so that water does
not leak from the gap of the cable connected to the outside.
1. Connect the Power, I/O, AUDIO, and LAN cables.
2. Wrap the black cable jacket (Area A) and the cable connection area with
waterproof (butyl rubber) tape so that more than half of the butyl rubber tape
is overlapped.
Camera Camera
System System
J If the cable jacket is not waterproofed properly, then it can directly cause leakage. Make sure to protect the cable with a dense layer of taping.
Waterproof butyl tape is made of butyl rubber that can be stretched to twice
its normal length.
A Camera
A System
English _15
INSTALLATION & CONNECTION
installation & connection
CONNECTING WITH OTHER DEVICE
Powering and networking
Connect the HPoE device with the HPoE terminal of the camera.
Power Supply
Use the screwdriver to connect each line (+, ) of the power cable to the
corresponding power port of the camera.
PoE INJECTOR
LAN PoE
ACTIVE POWER
INTERNET
J Connect and use a HPoE-enabled router.
Use a HPoE device that complies
with the IEEE802.3bt(PSE TYPE 3 or 4) standard. ` If you connect using an
HPoE-enabled router, you don’t need a separate power supply cable to power it
on.
Network Cable Specification
Item Connector
Ethernet
Cable Max Distance
HPoE
Contents RJ45 (10/100/1000BASE-T)
10/100/1000BASE-T
Category 6 100M HPoE
Remark
To operate with 1000BASE-T, a cable of Category 6 or higher should be used for
the Giga hub.
DC Resistance 0.188 /m
J Adapter with DC 12V 4A higher is recommended.
We recommend using HPoE injectors for powering the unit
Do not use DC power and HPoE injector at the same time.
Be careful not to reverse the polarity when you connect the power cable. `
If you want to connect an external device, you must turn off the external
device before proceeding.
Power Cable Specification
DC 12V input :
Wire Type (AWG) Cable Length (Max.)
14
16
14m
9m
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
16_ installation & connection
INSTALLATION & CONNECTION
Connecting to Audio Input/Output
Speaker
PC
Microphone
Network
Speaker Amp
Microphone Amp
Microphone
Speaker
1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT
port of the amplifier that the microphone is connected to.
2. Connect the AUDIO OUT port of the camera with the speaker or LINE IN port
of the amplifier that the speaker is connected to.
3. Check the specifications for audio input.
· Audio Codec – Audio In : G.711 PCM (Bit Rate: 64kbps / Sampling Frequency:
8kHz), G.726 ADPCM (Bit Rate: 16Kbps, 24Kbps, 32Kbps, 40Kbps / Sampling
Frequency: 8kHz), AAC (Bit Rate: 48Kbps / Sampling Frequency: 16kHz) – Audio
Out : G.711 PCM (Bit Rate: 64kbps / Sampling Frequency: 8kHz)
· Full duplex Audio · Audio in : Selectable (microphone/Line-in), Supported
voltage: 2.5VDC (4mA), Input impedance: 2K Ohm · Audio out : Line-out (3.5mm
mono jack), Maximum output: 1Vms · Line out impedance : 600
J ` In the case you access the web viewer and select an external microphone as
the audio input sources in <Video & Audio>
English _17
installation & connection
Connecting to the I/O port box
Connect the Alarm I/O cable to the corresponding port of the port box.
Sensor Alarm (Warning lamp) · ALARM-IN : Used to connect the alarm input
sensor or external day/night sensor. · ALARM-OUT : Used to connect the alarm
output signal. · GND : Common port for alarm in/output signal.
J ` If devices (e.g., flashing light and siren) that exceed the voltage and
current specifications are connected by using the open collector method, it
may cause malfunction. Refer to the “Alarm Out Wiring Diagram” when connecting
devices that exceed the voltage and current specifications.
To connect the external sensor
Connect one strand of each signal line (2-strand) of the sensors to the [ALARM
IN] port, and connect the other strand to the [GND] port.
Alarm In Wiring Diagram
External connection
Inside of the camera
VCC_3.3V
Sensor
ALARM IN (5mA SINK) GND
RESISTOR
RESISTOR
RESISTOR
DIODE
MLCC TRANSISTOR
GND
To connect the alarm out
If devices (e.g., flashing light and siren) that exceed the voltage and
current specifications are connected by using the open collector method, it
may cause malfunction. Refer to the alarm out connection diagram below when
connecting devices that exceed the voltage and current specifications.
J ` N.C. (Normal Close) method is not supported.
Alarm Out Wiring Diagram
Warning lamp / Siren power
(-)
(+)
Warning lamp / Siren
External connection
DC 5V or 3.3V
Inside of the camera
DIODE RELAY
RESISTOR 10K ohm TRANSISTOR
ALARM OUT (12VDC 20mA MAX)
RESISTOR
TRANSISTOR
GND GND
GND
18_ installation & connection
NETWORK CONNECTION AND SETUP
network connection and setup
You can set up the network settings according to your network configurations.
CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING
Connecting to the camera from a local PC in the LAN
1. Launch an Internet browser on the local PC. 2. Enter the IP address of the
camera in the address bar of the browser.
CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM
Camera
DSL/Cable Modem
INTERNET
External Remote PC
Camera Camera
INTERNET
External Remote PC
Local PC
DDNS Server (Data Center, KOREA)
M A remote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet if the port-forwarding is not properly set or a firewall is set. In this case, to resolve the problem, contact your network administrator.
By factory default, the IP address will be assigned from the DHCP server
automatically. If there is no DHCP server available, the IP address will be
set to 192.168.1.100. To change the IP address, use the Device Manager. For
further details on Device Manager use, refer to “Using Device Manager”. (Page
20)
DDNS Server (Data Center, KOREA)
1. Connect the user PC directly with the network camera. 2. Run the Device
Manager and change the IP address of the camera so that you can use the web
browser
on your desktop to connect to the Internet. 3. Use the Internet browser to
connect to the web viewer. 4. Move to [Setup] page. 5. Move to [Network]
[DDNS] and configure the DDNS settings. 6. Move to [Basic] [IP & Port], and
set the IP type to [DHCP]. 7. Connect the camera, which was removed from your
PC, directly to the modem. 8. Restart the camera.
M For information on how to set DDNS, refer to the online help of Web Viewer.
For information on how to set the IP format, refer to the online help of Web
Viewer.
English _19
network connection and setup
USING DEVICE MANAGER
M Device manager program can be downloaded from <Technical Guides>-<Online Tool> menu at Hanwha Techwin website (http://www.hanwha-security.com).
More
instructions of Device Manager can be found at
AUTOMATICALLY SEARCHING CAMERA
If a camera is connected to the same network of the PC where device manager is
installed, you can find network camera by using search function.
1. Click
· Check MAC address at the sticker attached to the camera.
CONFIGURING IP ADDRESS
If you want to change camera network setting,
Configuring Static IP
Manually insert and configure IP address & port information. 1. Click the
camera from the list that you want the change the
IP setting. 2. Click
If using a Broadband Router
· IP Address : Enter an address falling in the IP range provided by the
Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254
· Subnet Mask : The
· Gateway : The
M The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router.
For more information about port forwarding of the broadband router, refer to
“Port Range Forward (Port Mapping) Setup”. (Page 22)
If the Broadband Router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other. ex)
Category
Camera #1
Camera #2
IP related settings
IP Address Subnet Mask Gateway
192.168.1.100 255.255.255.0 192.168.1.1
192.168.1.101 255.255.255.0 192.168.1.1
Port related settings
HTTP Port RTSP Port
8080 554
8081 555
M ` If the
5. Click [Apply] Button. 6. If the success message is displayed, click [OK].
20_ network connection and setup
NETWORK CONNECTION AND SETUP
Configuring Dynamic IP
Receive IP address from DHCP
· Example of the Dynamic IP environment – If a Broadband Router, with cameras
connected, is assigned an IP address by the DHCP server
– If connecting the camera directly to modem using the DHCP protocols
– If IPs are assigned by the internal DHCP server via the LAN
1. Click the camera from the list that you want to change the IP setting.
2. Click
AUTOMATICALLY CONFIGURING IP
1. Click the camera from the list that you want to automatically
configure the IP.
PNM-9084RQZ
2. Click < + > at the main page of device manager. · Equipment Setting menu appears.
3. At the menu, click
4. Click [Close] button.
MANUALLY REGISTERING CAMERA
If the camera cannot be found using search function, the camera can be
registered remotely by manually inserting IP information, if the camera is
connected to external network.
1. Click
2. Insert the range of IP address that you search. 3. Select the
and insert HTTP port, ID, and password. 4. Click [Register] button. 5. Check
if camera is registered.
· Check MAC address at the sticker attached to the camera.
English _21
network connection and setup
PORT RANGE FORWARD (PORT MAPPING) SETUP
If you have installed a Broadband Router with a camera connected, you must set
the port range forwarding on the Broadband Router so that a remote PC can
access the camera in it.
Manual Port Range Forwarding
1. From the Setup menu of the Broadband Router, select <Applications &
Gaming> –
2. Select
3. When done, click [Save Settings]. Your settings will be saved.
M Port forwarding setting is an example of setting CISCO IP router.
The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.
Setting up Port Range Forward for several network cameras
· You can set a rule of Port Forwarding on the Broadband Router device through
its configuration web page. · A user can change each port using the camera
setting screen.
When Camera1 and Camera2 are connected to a router :
User
Internet
Camera1 (192.168.1.100)
Start
Broadband Router
End
Protocol
IP Address
HTTP port RTSP port
8080 3000
3000 3000 TCP/UDP 192.168.1.100
3001 3001 TCP/UDP 192.168.1.101
8080
8080
TCP/UDP 192.168.1.100
Camera2 (192.168.1.101)
8081 8081 TCP/UDP 192.168.1.101
HTTP port
8081
RTSP port
3001
M ` Port forwarding can be done without additional router setup if the router
supports the UPnP (Universal Plug and Play) function. After connecting the
network camera, select the checkbox from the menu
22_ network connection and setup
CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC
1. Run device manager. It will scan for connected cameras and display them as
a list.
2. Double-click a camera to access. The Internet browser starts and connects
to the camera.
M Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet browser. CONNECTING TO THE CAMERA FROM A REMOTE PC VIA THE INTERNET On a remote computer that is not in the Broadband Router’s network cluster is not allowed, users can access cameras within a Broadband Router’s network by using the camera’s DDNS URL. 1\. Before you can access a camera in the Broadband Router network, you should have set the port range forward for the Broadband Router. 2\. From the remote PC, launch the Internet browser and type the DDNS URL address of the camera, or the IP address of the Broadband Router in the address bar. ex) http://ddns.hanwha-security.com/ID M
To use Wisenet DDNS, sign up at the Wisenet DDNS homepage (http://ddns
.hanwha-security.com) and register the product at [My DDNS]>[Register
Product].
English _23
NETWORK CONNECTION AND SETUP
web viewer
CONNECTING TO THE CAMERA
Normally, you would
1. Launch the Internet browser. 2. Type the IP address of the camera in the
address bar.
ex) · IP address (IPv4) : 192.168.1.100 http://192.168.1.100 – the Login
dialog should appear. · IP address (IPv6) : 2001:230:abcd:
ffff:0000:0000:ffff:1111 http://[2001:230:abcd:ffff:0000:0000:ffff:1111] – the
Login dialog should appear.
If the HTTP port is other than 80
1. Launch the Internet browser. 2. Type the IP address and HTTP port number
of the camera in the address bar.
ex) IP address : 192.168.1.100:HTTP Port number(8080)
http://192.168.1.100:8080 – the Login dialog should appear.
Using URL
1. Launch the Internet browser. 2. Type the DDNS URL of the camera in the
address bar.
ex) URL address : http://ddns.hanwha-security.com/ID – the Login dialog should
appear.
J ` Network connection is disabled in the LAN only environment.
Connecting via UPnP
1. Run the client or operating system in support of the UPnP protocol. 2.
Click the camera name for search.
In the Windows operating system, click the camera name searched from the
network menu. – The login window is displayed.
Connecting via Bonjour
1. Run the client or operating system in support of the Bonjour protocol. 2.
Click the camera name for search.
In the Mac operating system, click the camera name searched from the Bonjour
tab of Safari. – The login window is displayed.
To check the DDNS address
If the camera is connected directly to a DHCP-based cable modem or DSL modem,
the IP address will change each time it tries to connect to the ISP (the
company you subscribed to). If this is the case, you will not be informed of
the IP address changed by DDNS.
Once you register a dynamic IP-based device with the DDNS server, you can
easily check the changed IP when you try to access the device. To register
your device to the
24_ web viewer
WEB VIEWER
PASSWORD SETTING
When you access the product for the first time, you must register the login
password.
J For a new password with 8 to 9 digits, you must use at least 3 of the following: uppercase/lowercase letters, numbers and special characters. For a password with 10 to 15 digits, you must use at least 2 types of those mentioned. – Special characters that are allowed. : ~
!@#$%^*()_-+=|{}[].?/ For higher security, you are not recommended to repeat the same characters or consecutive keyboard inputs for your passwords.
If you lost your password, you can press the [RESET] button to initialize
the product. So, don’t lose your password by using a memo pad or memorizing
it.
LOGIN
Whenever you access the camera, the login window appears. Enter the User ID
and password to access the camera.
1. Enter “admin” in the
2. Enter the password in the
If you have logged in successfully, you will the Live Viewer screen.
J When you access the camera web viewer, pay special attention to the security by checking whether the image data is encrypted. M
If you check the “Remember my credentials” option when your input is done,
in future you will be logged in automatically without being prompted to enter
the login information.
` You will experience the best video quality if the screen size is 100%.
Reducing the ratio may cut the image on the borders.
CAMERA WEB VIEWER SETUP
1. Click the [Setup ( )] icon. 2. The Settings window appears. 3. You can
configure settings for the camera’s basic information, video, audio, network,
event, analysis, and
system over the network. 4. Click <Help ( )> to view detailed descriptions of
each function.
English _25
appendix
TROUBLESHOOTING
PROBLEM
SOLUTION
No video is displayed when accessing the plug-in free webviewer on Safari via HTTPS.
y On the authentication popup window prompted when initially accessing https,
click “View Authentication Certificate” and select the “Always trust when
connecting to the designated webviewer IP” check box.
y If the webviewer continues failing to display a video after you select
“Next” on the message window below, press the command key + Q to exit the
Safari browser, access again and follow the procedures stated above.
I can’t access the camera from a web browser.
y Check to make sure that the camera’s Network settings are appropriate.
y Check to make sure that all network cables have been connected properly.
y If connected using DHCP, verify that the camera is able to acquire dynamic
IP addresses without any problem.
y If the camera is connected to a Broadband Router, verify that port
forwarding is properly configured.
Viewer got disconnected during monitoring.
y Connected Viewers become disconnected upon any change to camera or network
configurations.
y Check all network connections.
The camera connected to the network is not detected in the Device Manager y
Turn off the firewall settings on your PC and then search the camera again.
program.
PROBLEM Images overlap.
SOLUTION
y Check whether two or more cameras are set to a single multicast address
instead of different addresses. If a single address is used for multiple
cameras, the images may overlap.
No image appears.
y If the transmission method is set to multicast, check whether there is a
router that supports multicast in the LAN the camera is connected to.
y Check whether the lens module is operating normally.
y Verify the settings in the following sequence: A. Check <Data & Time>
settings. B. The
Cannot record into the Micro SD memory card.
y Check if the memory card is defective.
y Check if the memory card is inserted in the proper direction. Operation of
memory card that Micro SD memory card is inserted but is formatted by other
devices is not guaranteed with this camera unit the camera does not operate
properly. y Format the memory card again in
26_ appendix
OPEN SOURCE ANNOUNCEMENT
GPL/LGPL software license
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@hanwha.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
GPL SW
Component Name
Base Kernel Busybox iproute2-4.3.0 iptables-1.4.21 ethtool-4.2 mtd-1.5.2 mii-
diag-2.11 rp-pppoe-3.11 wpa_supplicant-2.5 bash-4.3.30 zeroconf
License
GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL 2.0 GPL
3.0 GPL 2.0
URL
http://www.busybox.net/downloads/snapshots
http://ftp.netfilter.org/pub/iptables ftp://ftp.infradead.org/pub/mtd-utils
http://www.roaringpenguin.com/pppoe/
LGPL SW
Component Name
gLibc Inetutils neon-0.29.6
License
LGPL 2.0 LGPL 3.0 LGPL 2.0
URL http://www.webdav.org/neon/
GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C)1989, 1991 Free
Software Foundation, Inc. 51 Franklin Street,Fifth Floor, Boston, MA
02110-1301, USA Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble The licenses for most software are designed to take away your freedom
to share and change it. By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free software– to make
sure the software is free for all its users. This General Public License
applies to most of the Free Software Foundation’s software and to any other
program whose authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License instead.) You can
apply it to your programs, too. When we speak of free software, we are
referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code or can get
it if you want it, that you can change the software or use pieces of it in new
free programs ; and that you know you can do these things. To protect your
rights, we need to make restrictions that forbid anyone to deny you these
rights or to ask you to surrender the rights. These restrictions translate to
certain responsibilities for you if you distribute copies of the software, or
if you modify it. For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the source
code. And you must show them these terms so they know their rights. We protect
your rights with two steps : (1)copyright the software, and (2)offer you this
license which gives you legal permission to copy, distribute and/or modify the
software. Also, for each author’s protection and ours, we want to make certain
that everyone understands that there is no warranty for this free software. If
the software is modified by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems
introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We
wish to avoid the danger that redistributors of a free program will
individually obtain patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must be licensed for
everyone’s free use or not licensed at all. The precise terms and conditions
for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION Version 2,
June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin
S 0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms of
this
General Public License. The “Program”, below, refers to any such program or
work, and a “work based on the Program” means either the Program or any
derivative work under copyright law : that is to say, a work containing the
Program or a portion of it, either verbatim or with modifications and/or
translated into another language. (Hereinafter, translation is included
without limitation in the term “modification”.) Each licensee is addressed as
“you”. Activities other than copying, distribution and modification are not
covered by this License ; they are outside its scope. The act of running the
Program is not restricted, and the output from the Program is covered only if
its contents constitute a work based on the Program (independent of having
been made by running the Program). Whether that is true depends on what the
Program does. 1. You may copy and distribute verbatim copies of the Program’s
source code as you receive it, in any medium, provided that you conspicuously
and
appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License
and to the absence of any warranty ; and give any other recipients of the
Program a copy of this License along with the Program. You may charge a fee
for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee. 2. You may modify your copy or
copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions :
a) You must cause the modified files to carry prominent notices stating that
you changed the files and the date of any change. b) You must cause any work
that you distribute or publish, that in whole or in part contains or is
derived from the Program or any part thereof, to be licensed
as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run,you
must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License.
(Exception:if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to print
an announcement.) These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program, and can
be reasonably considered independent and separate works in themselves, then
this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same sections
as part of a whole which is a work based on the Program, the distribution of
the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your
rights to work written entirely by you ; rather, the intent is to exercise the
right to control the distribution of derivative or collective works based on
the Program. In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program)on a volume of a
storage or distribution medium does not bring the other work under the scope
of this License. 3. You may copy and distribute the Program (or a work based
on it, under Section 2)in object code or executable form under the terms of
Sections 1 and 2
above provided that you also do one of the following : a) Accompany it with
the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange ; or, b) Accompany it with a written offer,
valid for at least three years, to give any third party, for a charge no more
than your cost of physically performing source distribution, a complete
machinereadable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software
interchange ; or, c) Accompany it with the information you received as to the
offer to distribute corresponding source code. (This alternative is allowed
only for noncommercial distribution and only if you received the program in
object code or executable form with such an offer, in accord with Subsection b
above.) The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source code means
all the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and
installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in
either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the
executable runs, unless that component itself accompanies the executable. If
distribution of executable or object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the source
code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the
object code. 4. You may not copy, modify, sublicense, or distribute the
Program except as expressly provided under this License. Any attempt otherwise
to copy, modify, sublicense or distribute the Program is void, and will
automatically terminate your rights under this License. However, parties who
have received copies, or rights, from you under this License will not have
their licenses terminatedso long as such parties remain in full compliance. 5.
You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Program or its derivative works. These actions are prohibited by law if you do
not accept this License.Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing
or modifying the Program or works based on it. 6. Each time you redistribute
the Program (or any work based on the Program), the recipient automatically
receives a license from the original licensor to copy, distribute or modify
the Program subject to these terms and conditions. You may not impose any
further restrictions on the recipients’ exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to this
License. 7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise)that contradict the conditions of this License, they do not excuse
you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other
pertinent obligations, then as a consequence you may not distribute the
Program at all. For example, if a patent license would not permit royaltyfree
redistribution of the Program by all those who receive copies directly or
indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Program. If any
portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section
as a whole is intended to apply in other circumstances. It is not the purpose
of this section to induce you to infringe any patents or other property right
claims or to contest validity of any such claims; this section has the sole
purpose of protecting the integrity of the free software distribution system,
which is implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed through that
system in reliance on consistent application of that system ; it is up to the
author/donor to decide if he or she is willing to distribute software through
any other system and a licensee cannot impose that choice. This section is
intended to make thoroughly clear what is believed to be a consequence of the
rest of this License. 8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation excluding
those countries,so that distribution is permitted only in or among countries
not thus excluded. In such case, this License incorporates the limitation as
if written in the body of this License. 9. The Free Software Foundation may
publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but
may differ in detail to address new problems or concerns. Each version is
given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and “any later version”, you have
the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program
does not specify a version number of this License, you may choose any version
ever published by the Free Software Foundation. 10. If you wish to incorporate
parts of the Program into other free programs whose distribution conditions
are different, write to the author to ask for permission. For software which
is copyrighted by the Free Software Foundation,write to the Free Software
Foundation ; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of
our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM “ASIS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAMPROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to
Apply These Terms to Your New Programs If you develop a new program, and you
want it to be of the greatest possible use to the public, the best way to
achieve this is to make it free software which everyone can redistribute and
change under these terms. To do so, attach the following notices to the
program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty ; and each file should have at
least the “copyright” line and a pointer to where the full notice is found.one
line to give the program’s name and an idea of what it does. Copyright (C)yyyy
name of author This program is free software ; you can redistribute it and/or
modify it under the terms of the GNU General Public License as published by
the Free Software Foundation ; either version 2 of the License, or (at your
option)any later version. This program is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details. You should have received a copy of the GNU
General Public License along with this program ; if not, write to the Free
Software Foundation, Inc.,51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA. Also add information on how to contact you by electronic and
paper mail. If the program is interactive, make it output a short notice like
this when it starts in an interactive mode : Gnomovision version 69, Copyright
(C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY ; for
details type show w’. This is free software, and you are welcome to redistribute it under certain conditions ; type
show c’ for details. The
hypothetical commands show w’ and
show c’ should show the appropriate parts
of the General Public License. Of course, the commands you use may be called
something other than show w’ and
show c’ ; they could even be mouse-clicks
or menu items– whatever suits your program.
You should also get your employer (if you work as a programmer)or your school,
if any, to sign a “copyright disclaimer” for the program,if necessary. Here is
a sample ; alter the names: Yoyodyne, Inc.,hereby disclaims all copyright
interest in the program `Gnomovision’ (which makes passes at compilers)
written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President
of Vice This General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is Lwihcaetn ysoeu want to do, use the GNU Lesser General
Public instead of this License.
GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free
Software Foundation, Inc. http://fsf.org/ Everyone is permitted to copy and
distribute verbatim copies of this license document, but changing it is not
allowed. Preamble The GNU General Public License is a free, copyleft license
for software and other kinds of works. The licenses for most software and
other practical works are designed to take away your freedom to share and
change the works. By contrast, the GNU General Public License is intended to
guarantee your freedom to share and change all versions of a program– to make
sure it remains free software for all its users. We, the Free Software
Foundation, use the GNU General Public License for most of our software; it
applies also to any other work released this way by its authors. You can apply
it to your programs, too. When we speak of free software, we are referring to
freedom, not price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you want it,
that you can change the software or use pieces of it in new free programs, and
that you know you can do these things. To protect your rights, we need to
prevent others from denying you these rights or asking you to surrender the
rights. Therefore, you have certain responsibilities if you distribute copies
of the software, or if you modify it: responsibilities to respect the freedom
of others. For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same freedoms that
you received. You must make sure that they, too, receive or can get the source
code. And you must show them these terms so they know their rights. Developers
that use the GNU GPL protect your rights with two steps: (1) assert copyright
on the software, and (2) offer you this License giving you legal permission to
copy, distribute and/or modify it. For the developers’ and authors’
protection, the GPL clearly explains that there is no arranty for this free
software. For both users’ and authors’ sake, the GPL requires that modified
versions be marked as changed, so that their problems will not be attributed
erroneously to authors of previous versions. Some devices are designed to deny
users access to install or run modified versions of the software inside them,
although the manufacturer can do so. This is fundamentally incompatible with
the aim of protecting users’ freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to use,
which is precisely where it is most unacceptable. Therefore, we have designed
this version of the GPL to prohibit the practice for those products. If such
problems arise substantially in other domains, we stand ready to extend this
provision to those domains in future versions of the GPL, as needed to protect
the freedom of users. Finally, every program is threatened constantly by
software patents. States should not allow patents to restrict development and
use of software on generalpurpose omputers, but in those that do, we wish to
avoid the special anger that patents applied to a free program could make it
ffectively proprietary. To prevent this, the GPL assures that atents cannot be
used to render the program non-free. he precise terms and conditions for
copying, distribution and modification follow.
TERMS AND CONDITIONS
0. Definitions. “This License” refers to version 3 of the GNU General Public
License. Copyright” also means copyright-like laws that apply to other kinds
of works, such as semiconductor masks. “The Program” refers to any
copyrightable work licensed under this License. Each licensee is addressed as
“you”. “Licensees” and “recipients” may be individuals or organizations. To
“modify” a work means to copy from or adapt all or part of the work in a
fashion requiring copyright permission, other than the making of an exact
copy. The resulting work is called a “modified version” of the earlier work or
a work “based on” the earlier work. A “covered work” means either the
unmodified Program or a work based on the Program. To “propagate” a work means
to do anything with it that, without permission, would make you directly or
secondarily liable for infringement under applicable copyright law, except
executing it on a computer or modifying a private copy. Propagation includes
copying, distribution (with or without modification), making available to the
public, and in some countries other activities as well. To “convey” a work
means any kind of propagation that enables other parties to make or receive
copies. Mere interaction with a user through a computer network, with no
transfer of a copy, is not conveying. An interactive user interface displays
“Appropriate Legal Notices” to the extent that it includes a convenient and
prominently visible feature that (1) displays an appropriate copyright notice,
and (2) tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the work under
this License, and how to view a copy of this License. If the interface
presents a list of user commands or options, such as a menu, a prominent item
in the list meets this criterion.
1. Source Code. The “source code” for a work means the preferred form of the
work for making modifications to it. “Object code” means any non-source form
of a work. A “Standard Interface” means an interface that either is an
official standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that is widely
used among developers working in that language. The “System Libraries” of an
executable work include anything, other than the work as a whole, that (a) is
included in the normal form of packaging a Major Component, but which is not
part of that Major Component, and (b) serves only to enable use of the work
with that Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A “Major
Component”, in this context, means a major essential component (kernel, window
system, and so on) of the specific operating system (if any) on which the
executable work runs, or a compiler used to produce the work, or an object
code interpreter used to run it. The “Corresponding Source” for a work in
object code form means all the source code needed to generate, install, and
(for an executable work) run the object code and to modify the work, including
scripts to control those activities. However, it does not include the work’s
System Libraries, or generalpurpose tools or generally available free programs
which are used unmodified in performing those activities but which are not
part of the work. For example, Corresponding Source includes interface
definition files associated with source files for the work, and the source
code for shared libraries and dynamically linked subprograms that the work is
specifically designed to require, such as by intimate data communication or
control flow between those subprograms and other parts of the work. The
Corresponding Source need not include anything that users can regenerate
automatically from other parts of the Corresponding Source. The Corresponding
Source for a work in source code form is that same work.
2. Basic Permissions. All rights granted under this License are granted for
the term of copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited permission
to run the unmodified Program. The output from running a covered work is
covered by this License only if the output, given its content, constitutes a
covered work. This License acknowledges your rights of fair use or other
equivalent, as provided by copyright law. You may make, run and propagate
covered works that you do not convey, without conditions so long as your
license otherwise remains in force. You may convey covered works to others for
the sole purpose of having them make modifications exclusively for you, or
provide you with facilities for running those works, provided that you comply
with the terms of this License in conveying all material for which you do not
control copyright. Those thus making or running the covered works for you must
do so exclusively on your behalf, under your direction and control, on terms
that prohibit them from making any copies of your copyrighted material outside
their relationship with you. Conveying under any other circumstances is
permitted solely under the conditions stated below. Sublicensing is not
allowed; section 10 makes it unnecessary.
3. Protecting Users’ Legal Rights From anti-Circumvention Law. No covered
work shall be deemed part of an effective technological measure under any
applicable law fulfilling obligations under article 11 of the WIPO copyright
treaty adopted on 20 December 1996, or similar laws prohibiting or restricting
circumvention of such measures. When you convey a covered work, you waive any
legal power to forbid circumvention of technological measures to the extent
such circumvention is effected by exercising rights under this License with
respect to the covered work, and you disclaim any intention to limit operation
or modification of the work as a means of enforcing, against the work’s users,
your or third parties’ legal rights to forbid circumvention of technological
measures.
4. Conveying Verbatim Copies. You may convey verbatim copies of the Program’s
source code as you receive it, in any medium, provided that you conspicuously
and appropriately publish on each copy an appropriate copyright notice; keep
intact all notices stating that this License and any non-permissive terms
added in accord with section 7 apply to the code; keep intact all notices of
the absence of any warranty; and give all recipients a copy of this License
along with the Program. You may charge any price or no price for each copy
that you convey, and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions. You may convey a work based on the
Program, or the modifications to produce it from the Program, in the form of
source code under the terms of section 4, provided that you also meet all of
these conditions:
a) The work must carry prominent notices stating that you modified it, and
giving a relevant date. b) The work must carry prominent notices stating that
it is released under this License and any conditions added under section 7.
This requirement modifies
the requirement in section 4 to “keep intact all notices”. c) You must license
the entire work, as a whole, under this License to anyone who comes into
possession of a copy. This License will therefore apply, along
with any applicable section 7 additional terms, to the whole of the work, and
all its parts, regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not invalidate
such permission if you have separately received it. d) If the work has
interactive user interfaces, each must display Appropriate Legal Notices;
however, if the Program has interactive interfaces that do not display
Appropriate Legal Notices, your work need not make them do so. A compilation
of a covered work with other separate and independent works, which are not by
their nature extensions of the covered work, and which are not combined with
it such as to form a larger program, in or on a volume of a storage or
distribution medium, is called an “aggregate” if the compilation and its
resulting copyright are not used to limit the access or legal rights of the
compilation’s users beyond what the individual works permit. Inclusion of a
covered work in an aggregate does not cause this License to apply to the other
parts of the aggregate. 6. Conveying Non-Source Forms. You may convey a
covered work in object code form under the terms of sections 4 and 5, provided
that you also convey the machine-readable Corresponding Source under the terms
of this License, in one of these ways: a) Convey the object code in, or
embodied in, a physical product (including a physical distribution medium),
accompanied by the Corresponding Source fixed on a durable physical medium
customarily used for software interchange. b) Convey the object code in, or
embodied in, a physical product (including a physical distribution medium),
accompanied by a written offer, valid for at least three years and valid for
as long as you offer spare parts or customer support for that product model,
to give anyone who possesses the object code either (1) a copy of the
Corresponding Source for all the software in the product that is covered by
this License, on a durable physical medium customarily used for software
interchange, for a price no more than your reasonable cost of physically
performing this conveying of source, or (2) access to copy the Corresponding
Source from a network server at no charge. c) Convey individual copies of the
object code with a copy of the written offer to provide the corresponding
Source. This alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord with
subsection 6b. d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no further
charge. You need not require recipients to copy the Corresponding Source along
with the object code. If the place to copy the object code is a network
server, the Corresponding Source may be on a different server (operated by you
or a third party) that supports equivalent copying facilities, provided you
maintain clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the Corresponding
Source, you remain obligated to ensure that it is available for as long as
needed to satisfy these requirements. e) Convey the object code using peer-to-
peer transmission, provided you inform other peers where the object code and
Corresponding Source of the work are being offered to the general public at no
charge under subsection 6d. A separable portion of the object code, whose
source code is excluded from the Corresponding Source as a System Library,
need not be included in conveying the object code work. A “User Product” is
either (1) a “consumer product”, which means any tangible personal property
which is normally used for personal, family, or household purposes, or (2)
anything designed or sold for incorporation into a dwelling. In determining
whether a product is a consumer product, doubtful cases shall be resolved in
favor of coverage. For a particular product received by a particular user,
“normally used” refers to a typical or common use of that class of product,
regardless of the status of the particular user or of the way in which the
particular user actually uses, or expects or is expected to use, the product.
A product is a consumer product regardless of whether the product has
substantial commercial, industrial or non-consumer uses, unless such uses
represent the only significant mode of use of the product. “Installation
Information” for a User Product means any methods, procedures, authorization
keys, or other information required to install and execute modified versions
of a covered work in that User Product from a modified version of its
Corresponding Source. The information must suffice to ensure that the
continued functioning of the modified object code is in no case prevented or
interfered with solely because modification has been made. If you convey an
object code work under this section in, or with, or specifically for use in, a
User Product, and the conveying occurs as part of a transaction in which the
right of possession and use of the User Product is transferred to the
recipient in perpetuity or for a fixed term (regardless of how the transaction
is characterized), the Corresponding Source conveyed under this section must
be accompanied by the Installation Information. But this requirement does not
apply if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has been
installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates for a
work that has been modified or installed by the recipient, or for the User
Product in which it has been modified or installed. Access to a network may be
denied when the modification itself materially and adversely affects the
operation of the network or violates the rules and protocols for communication
across the network. Corresponding Source conveyed, and Installation
Information provided, in accord with this section must be in a format that is
publicly documented (and with an implementation available to the public in
source code form), and must require no special password or key for unpacking,
reading or copying. 7. Additional Terms. “Additional permissions” are terms
that supplement the terms of this License by making exceptions from one or
more of its conditions. Additional permissions that are applicable to the
entire Program shall be treated as though they were included in this License,
to the extent that they are valid under applicable law. If additional
permissions apply only to part of the Program, that part may be used
separately under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions. When you convey a
copy of a covered work, you may at your option remove any additional
permissions from that copy, or from any part of it. (Additional permissions
may be written to require their own removal in certain cases when you modify
the work.) You may place additional permissions on material, added by you to a
covered work, for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you add to a
covered work, you may (if authorized by the copyright holders of that
material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the terms of
sections 15 and 16 of this License; or b) Requiring preservation of specified
reasonable legal notices or author attributions in that material or in the
Appropriate Legal Notices displayed by works
containing it; or c) Prohibiting misrepresentation of the origin of that
material, or requiring that modified versions of such material be marked in
reasonable ways as different
from the original version; or d) Limiting the use for publicity purposes of
names of licensors or authors of the material; or e) Declining to grant rights
under trademark law for use of some trade names, trademarks, or service marks;
or f) Requiring indemnification of licensors and authors of that material by
anyone who conveys the material (or modified versions of it) with contractual
assumptions of liability to the recipient, for any liability that these
contractual assumptions directly impose on those licensors and authors. All
other non-permissive additional terms are considered “further restrictions”
within the meaning of section 10. If the Program as you received it, or any
part of it, contains a notice stating that it is governed by this License
along with a term that is a further restriction, you may remove that term. If
a license document contains a further restriction but permits relicensing or
conveying under this License, you may add to a covered work material governed
by the terms of that license document, provided that the further restriction
does not survive such relicensing or conveying. If you add terms to a covered
work in accord with this section, you must place, in the relevant source
files, a statement of the additional terms that apply to those files, or a
notice indicating where to find the applicable terms. Additional terms,
permissive or non-permissive, may be stated in the form of a separately
written license, or stated as exceptions; the above requirements apply either
way. 8. Termination. You may not propagate or modify a covered work except as
expressly provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under this
License (including any patent licenses granted under the third paragraph of
section 11). However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a) provisionally,
unless and until the copyright holder explicitly and finally terminates your
license, and (b) permanently, if the copyright holder fails to notify you of
the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated
permanently if the copyright holder notifies you ofthe violation by some
reasonable means, this is the first time you have received notice of violation
of this License (for any work) from that copyright holder, and you cure the
violation prior to 30 days after your receipt of the notice. Termination of
your rights under this section does not terminate the licenses of parties who
have received copies or rights from you under this License. If your rights
have been terminated and not permanently reinstated, you do not qualify to
receive new licenses for the same material under section 10. 9. Acceptance Not
Required for Having Copies. You are not required to accept this License in
order to receive or run a copy of the Program. Ancillary propagation of a
covered work occurring solely as a consequence of using peer-to-peer
transmission to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or modify
any covered work. These actions infringe copyright if you do not accept this
License. Therefore, by modifying or propagating a covered work, you indicate
your acceptance of this License to do so. 10. Automatic Licensing of
Downstream Recipients. Each time you convey a covered work, the recipient
automatically receives a license from the original licensors, to run, modify
and propagate that work, subject to this License. You are not responsible for
enforcing compliance by third parties with this License. An “entity
transaction” is a transaction transferring control of an organization, or
substantially all assets of one, or subdividing an organization, or merging
organizations. If propagation of a covered work results from an entity
transaction, each party to that transaction who receives a copy of the work
also receives whatever licenses to the work the party’s predecessor in
interest had or could give under the previous paragraph, plus a right to
possession of the Corresponding Source of the work from the predecessor in
interest, if the predecessor has it or can get it with reasonable efforts. You
may not impose any further restrictions on the exercise of the rights granted
or affirmed under this License. For example, you may not impose a license fee,
royalty, or other charge for exercise of rights granted under this License,
and you may not initiate litigation (including a cross-claim or counterclaim
in a lawsuit) alleging that any patent claim is infringed by making, using,
selling, offering for sale, or importing the Program or any portion of it. 11.
Patents. A “contributor” is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The work thus
licensed is called the contributor’s “contributor version”. A contributor’s
“essential patent claims” are all patent claims owned or controlled by the
contributor, whether already acquired or hereafter acquired, that would be
infringed by some manner, permitted by this License, of making, using, or
selling its contributor version, but do not include claims that would be
infringed only as a consequence of further modification of the contributor
version. For purposes of this definition, “control” includes the right to
grant patent sublicenses in a manner consistent with the requirements of this
License. Each contributor grants you a non-exclusive, worldwide, royaltyfree
patent license under the contributor’s essential patent claims, to make, use,
sell, offer for sale, import and otherwise run, modify and propagate the
contents of its contributor version. In the following three paragraphs, a
“patent license” is any express agreement or commitment, however denominated,
not to enforce a patent (such as an express permission to practice a patent or
covenant not to sue for patent infringement). To “grant” such a patent license
to a party means to make such an agreement or commitment not to enforce a
patent against the party. If you convey a covered work, knowingly relying on a
patent license, and the Corresponding Source of the work is not available for
anyone to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means, then you
must either (1) cause the Corresponding Source to be so available, or (2)
arrange to deprive yourself of the benefit of the patent license for this
particular work, or (3) arrange, in a manner consistent with the requirements
of this License, to extend the patent license to downstream recipients.
“Knowingly relying” means you have actual knowledge that, but for the patent
license, your conveying the covered work in a country, or your recipient’s use
of the covered work in a country, would infringe one or more identifiable
patents in that country that you have reason to believe are valid. If,
pursuant to or in connection with a single transaction or arrangement, you
convey, or propagate by procuring conveyance of, a covered work, and grant a
patent license to some of the parties receiving the covered work authorizing
them to use, propagate, modify or convey a specific copy of the covered work,
then the patent license you grant is automatically extended to all recipients
of the covered work and works based on it. A patent license is
“discriminatory” if it does not include within the scope of its coverage,
prohibits the exercise of, or is conditioned on the non-exercise of one or
more of the rights that are specifically granted under this License. You may
not convey a covered work if you are a party to an arrangement with a third
party that is in the business of distributing software, under which you make
payment to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the parties who
would receive the covered work from you, a discriminatory patent license (a)
in connection with copies of the covered work conveyedby you (or copies made
from those copies), or (b) primarily for and in connection with specific
products or compilations that contain the covered work, unless you entered
into that arrangement, or that patent
license was granted, prior to 28 March 2007. Nothing in this License shall be
construed as excluding or limiting any implied license or other defenses to
infringement that may otherwise be available to you under applicable patent
law. 12. No Surrender of Others’ Freedom. If conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of
thisLicense. If you cannot convey a covered work so as to satisfy
simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not convey it at all. For example,
if you agree to terms that obligate you to collect a royalty for further
conveying from those to whom you convey the Program, the only way you could
satisfy both those terms and this License would be to refrain entirely from
conveying the Program. 13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission to
link or combine any covered work with a work licensed under version 3 of the
GNU Affero General Public License into a single combined work, and to convey
the resulting work. The terms of this License will continue to apply to the
part which is the covered work, but the special requirements of the GNU Affero
General Public License, section 13, concerning interaction through a network
will apply to the combination as such. 14. Revised Versions of this License.
The Free Software Foundation may publish revised and/ or new versions of the
GNU General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address
new problems or concerns. Each version is given a distinguishing version
number. If the Program specifies that a certain numbered version of the GNU
General Public License “or any later version” applies to it, you have the
option of following the terms and conditions either of that numbered version
or of any later version published by the Free Software Foundation. If the
Program does not specify a version number of the GNU General Public License,
you may choose any version ever published by the Free Software Foundation. If
the Program specifies that a proxy can decide which future versions of the GNU
General Public License can be used, that proxy’s public statement of
acceptance of a version permanently authorizes you to choose that version for
the Program. Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any author or
copyright holder as a result of your choosing to follow a later version. 15.
Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS
WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO
EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR
DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17.
Interpretation of Sections 15 and 16. If the disclaimer of warranty and
limitation of liability provided above cannot be given local legal effect
according to their terms, reviewing courts shall apply local law that most
closely approximates an absolute waiver of all civil liability in connection
with the Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
OpenSSL Combined License
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
Component Name openssl-1.0.2e
License OpenSSL
URL Combined License http://www.openssl.org/source
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met: 1.
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer. 2. Redistributions in binary
form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or
other materials provided with the distribution. 3. All advertising materials
mentioning features or use of this software must display the following
acknowledgment: “This product includes software developed
by the OpenSSL Projectfor use in the OpenSSL Toolkit.
(http://www.openssl.org/)” 4. The names “OpenSSL Toolkit” and “OpenSSL
Project” must not be used to endorse or promote products derived from this
software without prior written
permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may
“OpenSSL” appear in their names without prior written permission of the
OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following
acknowledgment: “This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes
cryptographic software written by Eric Young(eay@cryptsoft.com). This product
includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay
License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights
reserved. This package is an SSL implementation written by Eric Young
(eay@cryptsoft.com). The implementation was written so as to conform with
Netscapes SSL. This library is free for commercial and non-commercial use as
long as the following conditions are aheared to. The following conditions
apply to all code found in this distribution, be it the RC4, RSA, lhash, DES,
etc., code; not just the SSL code. The SSL documentation included with this
distribution is covered by the same copyright terms except that the holder is
Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young’s, and as such
any Copyright notices in the code are not to be removed. If this package is
used in a product, Eric Young should be given attribution as the author of the
parts of the library used. This can be in the form of a textual message at
program startup or in documentation (online or textual) provided with the
package. Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met: 1.
Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer. 2. Redistributions in binary form
must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or
other materials provided with the distribution. 3. All advertising materials
mentioning features or use of this software must display the following
acknowledgement: “This product includes cryptographic
software written by Eric Young (eay@cryptsoft.com)” The word ‘cryptographic’
can be left out if the rouines from the library being used are not
cryptographic related :-). 4. If you include any Windows specific code (or a
derivative thereof) from the apps directory (application code) you must
include an acknowledgement: “This product includes software written by Tim
Hudson (tjh@cryptsoft. com)” THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and
distribution terms for any publically available version or derivative of this
code cannot be changed. i.e. this code cannot simply be copied and put under
another distribution licence [including the GNU Public Licence.]
BSD License
Some software components of this product incorporate source code covered under
the BSD license as follows.
Component Name
License
URL
net-snmp-5.7.3 pcre-8.38 libcap-1.7.4 lighttpd-1.4.35 MiniUPnP Project Client pppd-2.4.7
BSD BSD BSD 2.0 BSD 2.0 BSD 2.0 BSD 2.0
http://www.net-snmp.org/about/license.html
http://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2
http://www.opensource.org/licenses/bsd-license.html
http://opensource.org/licenses/BSD-3-Clause
lighttpd is a secure, fast, compliant, and very flexible webserver that has
been optimized for high-performance environments. It has a very low memory
footprint compared to other webservers and takes care of cpuload. Its advanced
feature-set (FastCGI, CGI, Auth, Output-Compression, URL-Rewriting and many
more) make lighttpd the perfect webserver-software for every server that
suffers load problems. Simple Network Management Protocol (SNMP) is an
Internetstandard protocol for managing devices on IP networks. It is used
mostly in network management systems to monitor the devices attached to the
network for conditions that need administrative attention. Net-SNMP is a suite
of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both
IPv4 and IPv6. For more additional information, send email to
help.cctv@hanwha.com. Copyright (C) 2004, Kneschke, incremental All rights
reserved. Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met :
– Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer. – Redistributions in binary
form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or
other materials provided with the distribution. – Neither the name of the
`incremental’ nor the names of its contributors may be used to endorse or
promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright (c) 1998-2001 University College London All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, is permitted provided that the following conditions are met : 1.
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer. 2. Redistributions in binary
form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or
other materials provided with the distribution. 3. All advertising materials
mentioning features or use of this software must display the following
acknowledgement: This product includes software developed
by the Computer Science Department at University College London. 4. Neither
the name of the University nor of the Department may be used to endorse or
promote products derived from this software without specific prior
written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS
“AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Copyright
(c) 1988, 1989, 1990, 1991, 1993, 1994, 1995, 1996 The Regents of the
University of California. All rights reserved. Redistribution and use in
source and binary forms, with or without modification, are permitted provided
that the following conditions are met: 1. Redistributions of source code must
retain the above copyright notice, this list of conditions and the following
disclaimer. 2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer in the
documentation and/or
other materials provided with the distribution. 3. Neither the name of the
Regents of the University of California nor the names of its contributors may
be used to endorse or promote products derived from
this software without specific prior written permission. THIS SOFTWARE IS
PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Copyright (c) 2006,
Creative Labs Inc All rights reserved. Redistribution and use in source and
binary forms, with or without modification, are permitted provided that the
following conditions are met: 1. Redistributions of source code must retain
the above copyright notice, this list of conditions and the following
disclaimer. 2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer in the
documentation and/or
other materials provided with the distribution. 3. Neither the name of the
Creative Labs nor the names of its contributors may be used to endorse or
promote products derived from this software without
specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Copyright (c) 2005-2012,
Thomas BERNARD All rights reserved. Redistribution and use in source and
binary forms, with or without modification, are permitted provided that the
following conditions are met: 1. Redistributions of source code must retain
the above copyright notice, this list of conditions and the following
disclaimer. 2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer in the
documentation and/or
other materials provided with the distribution. 3. Neither the name of Thomas
BERNARD nor the names of its contributors may be used to endorse or promote
products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Various
copyrights apply to this package, listed in various separate parts below.
Please make sure that you read all the parts.
Part 1: CMU/UCD copyright notice: (BSD like) Copyright 1989, 1991, 1992 by
Carnegie Mellon University Derivative Work – 1996, 1998-2000 Copyright 1996,
1998-2000 The Regents of the University of California All Rights Reserved
Permission to use, copy, modify and distribute this software and its
documentation for any purpose and without fee is hereby granted, provided that
the above copyright notice appears in all copies and that both that copyright
notice and this permission notice appear in supporting documentation, and that
the name of CMU and The Regents of the University of California not be used in
advertising or publicity pertaining to distribution of the software without
specific written permission. CMU AND THE REGENTS OF THE UNIVERSITY OF
CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR
THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
Part 2 : Networks Associates Technology, Inc copyright notice (BSD) Copyright
(c) 2001-2003, Networks Associates Technology, Inc All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met: yy
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer. yy Redistributions in binary
form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided
with the distribution. yy Neither the name of the Networks Associates
Technology, Inc nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written
permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Part 3: Cambridge Broadband Ltd. copyrightnotice (BSD) Portions of this code
are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met: yy
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer. yy Redistributions in binary
form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided
with the distribution. yy The name of Cambridge Broadband Ltd. may not be used
to endorse or promote products derived from this software without specific
prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER
“AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Part 4: Sun Microsystems, Inc. copyright notice (BSD) Copyright (c) 2003 Sun
Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A.
All rights reserved. Use is subject to license terms below. This distribution
may include materials developed by third parties. Sun, Sun Microsystems, the
Sun logo and Solaris are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries. Redistribution and use in
source and binary forms, with or without modification, are permitted provided
that the following conditions are met: yy Redistributions of source code must
retain the above copyright notice, this list of conditions and the following
disclaimer. yy Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution. yy
Neither the name of the Sun Microsystems, Inc. nor the names of its
contributors may be used to endorse or promote products derived from this
software without specific prior written permission. THIS SOFTWARE IS PROVIDED
BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Part 5: Sparta, Inc copyright notice (BSD) Copyright (c) 2003-2009, Sparta,
Inc All rights reserved. Redistribution and use in source and binary forms,
with or without modification, are permitted provided that the following
conditions are met: yy Redistributions of source code must retain the above
copyright notice, this list of conditions and the following disclaimer. yy
Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the distribution. yy
Neither the name of Sparta, Inc nor the names of its contributors may be used
to endorse or promote products derived from this software without specific
prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Part 6: Cisco/BUPTNIC copyright notice (BSD) Copyright (c) 2004, Cisco, Inc
and Information Network Center of Beijing University of Posts and
Telecommunications. All rights reserved. Redistribution and use in source and
binary forms, with or without modification, are permitted provided that the
following conditions are met: yy Redistributions of source code must retain
the above copyright notice, this list of conditions and the following
disclaimer. yy Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution. yy
Neither the name of Cisco, Inc, Beijing University of Posts and
Telecommunications, nor the names of their contributors may be used to endorse
or promote products derived from this software without specific prior written
permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Part 7: Fabasoft R&D Software Software GmbH & Co KG copyright Notice (BSD)
Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003oss@fabasoft.com Author:
Bernhard Penz Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following conditions are
met: yy Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer. yy Redistributions in
binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or other materials
provided with the distribution. yy The name of Fabasoft R&D Software GmbH & Co
KG or any of its subsidiaries, brand or product names may not be used to
endorse or promote products derived from this software without specific prior
written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Part 8: Apple Inc. copyright notice (BSD) Copyright (c) 2007 Apple Inc. All
rights reserved. Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following conditions are
met: 1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer. 2. Redistributions in
binary form must reproduce the above copyright notice, this list of conditions
and the following disclaimer in the documentation and/or
other materials provided with the distribution. 3. Neither the name of Apple
Inc. (“Apple”) nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written
permission. THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL APPLE OR ITSCONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Part 9: ScienceLogic, LLC copyright notice(BSD) Copyright (c) 2009,
ScienceLogic, LLC All rights reserved. Redistribution and use in source and
binary forms, with or without modification, are permitted provided that the
following conditions aremet: yy Redistributions of source code must retain the
above copyright notice, this list of conditions and the following disclaimer.
yy Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution. yy Neither the name of
ScienceLogic, LLC nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written
permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE
The MIT License
Some software components of this product incorporate source code covered under
the MIT license as follows MIT License 2.0 – Acewidget, bettermeans, jquery-
ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio,
xorg-server, dropbear-2012.55,
ncurses-5.7
Copyright (c) 2011, The Dojo Foundation Copyright 2010, AUTHORS.txt
(http://jqueryui.com/about) Dual licensed under the MIT or GPL Version 2
licenses. – http://jquery.org/license – http://docs.jquery.com/UI/Widget
Copyright Daniel Veillard Copyright Igor Zlatovic igor@zlatkovic.com
Copyright Aleksey Sanin Copyright Gary Pennington Gary.Pennington@uk.sun.com
Copyright Alfred Mickautsch alfred@mickautsch.de Copyright Bjorn Reese
bjorn.reese@systematic.dk Copyright Joel W. Reed Copyright William Brack
wbrack@mmm.com.hk Copyright (c) 2007-2010 The Khronos Group Inc. Copyright
Atish Kumar Patra Copyright (c) 2006 Free Software Foundation, Inc. Permission
is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the
Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions: The above copyright notice and this
permission notice shall be included in all copies or substantial portions of
the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Mozilla Public License
Since we, at Hanwha Techwin, used the Mozilla Firefox component without
modifying the source code according to the MOZILLA Public license 1.1, we are
not obliged to provide the source code of the corresponding component. ·
Version 1.1
1. Definitions. 1.0.1. “Commercial Use” means distribution or otherwise
making the Covered Code available to a third party. 1.1. “Contributor” means
each entity that creates or contributes to the creation of Modifications. 1.2.
“Contributor Version” means the combination of the Original Code, prior
Modifications used by a Contributor, and the Modifications made by that
particular Contributor. 1.3. “Covered Code” means the Original Code or
Modifications or the combination of the Original Code and Modifications, in
each case including portions thereof. 1.4. “Electronic Distribution Mechanism”
means a mechanism generally accepted in the software development community for
the electronic transfer of data. 1.5. “Executable” means Covered Code in any
form other than Source Code. 1.6. “Initial Developer” means the individual or
entity identified as the Initial Developer in the Source Code notice required
by Exhibit A. 1.7. “Larger Work” means a work which combines Covered Code or
portions thereof with code not governed by the terms of this License. 1.8.
“License” means this document. 1.8.1. “Licensable” means having the right to
grant, to the maximum extent possible, whether at the time of the initial
grant or subsequently acquired, any and all of the rights conveyed herein.
1.9. “Modifications” means any addition to or deletion from the substance or
structure of either the Original Code or any previous Modifications. When
Covered Code is released as a series of files, a Modification is: A. Any
addition to or deletion from the contents of a file containing Original Code
or previous Modifications. B. Any new file that contains any part of the
Original Code or previous Modifications. 1.10. “Original Code” means Source
Code of computer software code which is described in the Source Code notice
required by Exhibit A as Original Code, and which, at the time of its release
under this License is not already Covered Code governed by this License.
1.10.1. “Patent Claims” means any patent claim(s), now owned or hereafter
acquired, including without limitation, method, process, and apparatus claims,
in any patent Licensable by grantor.
1.11. “Source Code” means the preferred form of the Covered Code for making
modifications to it, including all modules it contains, plus any associated
interface definition files, scripts used to control compilation and
installation of an Executable, or source code differential comparisons against
either the Original Code or another well known, available Covered Code of the
Contributor’s choice. The Source Code can be in a compressed or archival form,
provided the appropriate decompression or de-archiving software is widely
available for no charge. 1.12. “You” (or “Your”) means an individual or a
legal entity exercising rights under, and complying with all of the terms of,
this License or a future version of this License issued under Section 6.1. For
legal entities, “You” includes any entity which controls, is controlled by, or
is under common control with You. For purposes of this definition, “control”
means (a) the power, direct or indirect, to cause the direction or management
of such entity, whether by contract or otherwise, or (b) ownership of more
than fifty percent (50%) of the outstanding shares or beneficial ownership of
such entity.
2. Source Code License. 2.1. The Initial Developer Grant. The Initial
Developer hereby grants You a world-wide, royalty-free, non-exclusive license,
subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark)
Licensable by Initial Developer to use, reproduce, modify, display, perform,
sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
(b) under Patents Claims infringed by the making, using or selling of Original
Code, to make, have made, use, practice, sell, and offer for sale, and/or
otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the
date Initial Developer first distributes Original Code under the terms of this
License. (d) Notwithstanding Section 2.1(b) above, no patent license is
granted: 1) for code that You delete from the Original Code; 2) separate from
the Original Code; or
3) for infringements caused by: i) the modification of the Original Code or
ii) the combination of the Original Code with other software or devices. 2.2.
Contributor Grant. Subject to third party intellectual property claims, each
Contributor hereby grants You a world-wide, royalty-free, non-exclusive
license
(a) under intellectual property rights (other than patent or trademark)
Licensable by Contributor, to use, reproduce, modify, display, perform,
sublicense and distribute the Modifications created by such Contributor (or
portions thereof) either on an unmodified basis, with other Modifications, as
Covered Code and/ or as part of a Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of
Modifications made by that Contributor either alone and/or in combination with
its Contributor Version (or portions of such combination), to make, use, sell,
offer for sale, have made, and/or otherwise dispose of: 1) Modifications made
by that Contributor (or portions thereof); and 2) the combination of
Modifications made by that Contributor with its Contributor Version (or
portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the
date Contributor first makes Commercial Use of the Covered Code. (d)
Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any
code that Contributor has deleted from the Contributor Version; 2) separate
from the
Contributor Version; 3) for infringements caused by: i) third party
modifications of Contributor Version or ii) the combination of Modifications
made by that Contributor with other software (except as part of the
Contributor Version) or other devices; or 4) under Patent Claims infringed by
Covered Code in the absence of Modifications made by that Contributor. 3.
Distribution Obligations. 3.1. Application of License. The Modifications which
You create or to which You contribute are governed by the terms of this
License, including without limitation Section 2.2. The Source Code version of
Covered Code may be distributed only under the terms of this License or a
future version of this License released under Section 6.1, and You must
include a copy of this License with every copy of the Source Code You
distribute. You may not offer or impose any terms on any Source Code version
that alters or restricts the applicable version of this License or the
recipients’ rights hereunder. However, You may include an additional document
offering the additional rights described in Section 3.5. 3.2. Availability of
Source Code. Any Modification which You create or to which You contribute must
be made available in Source Code form under the terms of this License either
on the same media as an Executable version or via an accepted Electronic
Distribution Mechanism to anyone to whom you made an Executable version
available; and if made available via Electronic Distribution Mechanism, must
remain available for at least twelve (12) months after the date it initially
became available, or at least six (6) months after a subsequent version of
that particular Modification has been made available to such recipients. You
are responsible for ensuring that the Source Code version remains available
even if the Electronic Distribution Mechanism is maintained by a third party.
3.3. Description of Modifications. You must cause all Covered Code to which
You contribute to contain a file documenting the changes You made to create
that Covered Code and the date of any change. You must include a prominent
statement that the Modification is derived, directly or indirectly, from
Original Code provided by the Initial Developer and including the name of the
Initial Developer in (a) the Source Code, and (b) in any notice in an
Executable version or related documentation in which You describe the origin
or ownership of the Covered Code.
3.4. Intellectual Property Matters
(a) Third Party Claims. If Contributor has knowledge that a license under a
third party’s intellectual property rights is required to exercise the rights
granted by such Contributor under Sections 2.1 or 2.2, Contributor must
include a text file with the Source Code distribution titled “LEGAL” which
describes the claim and the party making the claim in sufficient detail that a
recipient will know whom to contact. If Contributor obtains such knowledge
after the Modification is made available as describe
References
- Wisenet DDNS - New name of SamsungiPOLiS!
- ddns.hanwha-security.com/ID
- Front Page — Free Software Foundation — working together for free software
- Index of /pub/iptables
- License | jQuery Foundation
- About jQuery UI | jQuery UI
- The 3-Clause BSD License – Open Source Initiative
- PHP: Hypertext Preprocessor
- PHP: PHP Software
- Hardware | Oracle
- Apache License, Version 2.0
- Index of /downloads/snapshots
- Hanwha Vision - Global Vision Solution Provider
- ietf.org/rfc/rfc1950.txt
- Index of /pub/linux/libs/security/linux-privs/libcap2/
- Net-SNMP
- The 2-Clause BSD License – Open Source Initiative
- /index.html
- /source/index.html
- PHP: Hypertext Preprocessor
- PHP: Downloads
- www.t-engine.org has moved
- neon HTTP and WebDAV client library
- Enterprise PHP Development Platform and Services | Zend by Perforce
- zlib Home Site
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>