HEATPEX ARIA ADURO System for Recuperation Instruction Manual

HEATPEX ARIA ADURO System for Recuperation

Product Information: Insulated Mass Flow Ductwork for Heat Recovery

Ventilation

The ARIA ADURO is a semi-rigid ducting system designed for air distribution in heat recovery ventilation units. It comes with a complete range of elements, including pipes, connectors, tees, reducers, mounting brackets, and adapters for HRV units with 150 and 180 mm spigots. The ARIA ADURO system is built from rigid materials with smooth inner walls, which reduces airflow resistance by up to 2 times compared to flexible ducts. This results in quiet operation and lower maintenance costs. The ARIA ADURO is also 9 times lighter than a traditional metal system, making it easier to install.

The ARIA ADURO system is 100% compatible with the HEATPEX ARIA air distribution semi-rigid ducting system, and its standard dimensions make it suitable for most heat recovery units available in the market. The internal dimensions of the ARIA ADURO comply with EN 1506:2007 standards. It also has high insulating properties, thanks to its EPS (expanded polystyrene) material.

Product Features

• Three diameters: 125, 160, and 200 mm
• Two times lower airflow resistance compared to flexible ducts
• Nine times lighter than traditional metal systems
• 100% compatible with HEATPEX ARIA air distribution semi-rigid ducting system
• High insulating properties
• Complete product range available on heatpex.pl

Usage Instructions

1. Plan your installation: determine the airflow requirements, the route of the ductwork, and the location of the HRV unit and the air outlets.
2. Choose the appropriate diameter of the ARIA ADURO pipes, reducers, and adapters for your HRV unit and air outlets. The ARIA ADURO system comes in three diameters: 125, 160, and 200 mm. Use the reducer to adjust to all diameters.
3. Connect the ARIA ADURO elements together using the One Click technology, which makes it faster and easier than ever before.
4. Use the original mounting brackets to install the ARIA ADURO pipes. The ultra-light elements require a minimum number of mounting brackets. Use markers (every 5 cm) to help cut the pipe to the required length. The wall thickness of only 17 mm lets you easily cut the pipe using a simple knife.
5. Connect the HRV unit adapter to the corresponding spigot on your HRV unit using a band clamp.
6. Connect the air outlets to the ARIA ADURO pipes using connectors or tees.
7. Install duct silencers (optional) to reduce noise levels.

For more information on how to use the ARIA ADURO system, refer to the product manual or visit heatpex.pl for a complete product range.

Instruction

Discover all advantages of ARIA ADURO
2x FASTER
ARIA ADURO is 9 times lighter than a traditional metal system, making installation much easier

Proven solution:
OneClick technology
Thanks to the application of OneClick technology known from HEATPEX ARIA air distribution system, connecting ARIA ADURO elements together is faster and easier than ever before.

2x LOWER
Lower AIRFLOW RESISTANCE

compared with flexible ducts:
quiet operation and lower maintenance costs

ARIA ADURO system is built from rigid materials with smooth inner walls
No risk of deformation during assembly – constant cross-section all along
Low noise level

Complete system
ARIA ADURO is 100% compatible with HEATPEX
ARIA air distribution semi-rigid ducting system

Standard dimensions
ARIA ADURO fits to most heat recovery units available on the market, its dimensions coherent with traditional ventilation systems. Internal dimensions comply with EN 1506:2007 standards.

Elements of ARIA ADURO system

Mounting bracket with adjustable band clamp

Connector
Connector (gasket included)-a simple push-fit connection. Connector low profile does not alter the overall installation diameter Special openings indicate secure connection.

• Pipes
  1-metre section, made entirely from 1 piece (monopipe) higher tightness and lower damage risk.

• Reducer
  Adjustable to all 3 diameters 125/160/200 mm.

• Connection
  adapter Intended for MHRV recovery units with 150 and 180 mm spigots.
  150 160
  180> 200

Application of ARIA ADURO
Alternative to spiro pipes. Transfer of large air flows between:

• Air intake, outlet grille
• And heat recovery unit
• heat recovery unit and internal air distribution ducting system

High insulating properties

Light, durable and airtight material with excellent insulating properties (EPS – expanded polystyrene), enriched with graphite – resistant to fungi, mould, and bacteria. Raw materials used along with added graphite significantly increase the insulation coefficient: λ=0.029 (W/mK), especially when compared to wool-insulated metal pipes.

Versatile system: 3 diameters
Reducer adjustable to all diameters

Original mounting brackets for quick installation

• Quick installation – simply attach the bracket to the surface, slide the pipe through and tighten the band.
• Ultra-light elements require a minimum number of mounting brackets.
• Modularity – brackets, connected in series or in parallel, can be used for routing two or more ducts next to each other.
• Versatility – one size bracket for all 3 diameters.

Effortless cutting

• simple setup
  Markers (every 5 cm) help cut the pipe to required length. Wall thickness of only 17 mm lets you easily cut the pipe, using a simple knife

Technical data: System elements

Name| Designation| Diameter| Length| Material| Catalogue number
---|---|---|---|---|---
inner| outer
mm| mm| mm

Pipe 1 m

| ADR 125| 125| 159| ****

1000

| ****

EPS

| 529 125 001
ADR160| 160| 194| 529 160 001
ADR 200| 200| 234| 529 200 001

Bend 45°

| ADK 125| 125| 159| 213| ****

EPS

| 529 125 901
ADK160| 160| 194| 226| 529 160 901
ADK 200| 200| 234| 240| 529 200 901

Tee

| ADT 125| 125| 159| ****

380

| ****

EPS

| 529 125 801
ADT160| 160| 194| 529 160 801
ADT 200| 200| 234| 529 200 801

Damper

| ADP 125| 125| 159| ****

250

| ****

EPS,

galvanized steel

| 529 125 601
ADP160| 160| 194| 529 160 601
ADP 200| 200| 234| 529 200 601
Connector| ADL 125| 125| ****

70

| ****

PP, EPDM

| 529 125 701
ADL160| 160| 529 160 701
ADL 200| 200| 529 200 701
Reducer| ADD 125/160/200| 125/160/200| 167| EPS| 520 102 001
Mounting bracket| ADU 125/160/200| 125/160/200| 300| PP, nylon| 520 101 001
NEW HRV unit connection adapter| AKR 150/160| 150/160| 40| EPDM| 520 116 001
AKR 180/200| 180/200| 40| EPDM| 520 117 001

Technical data: Accessories

Name| Designation| Diameter| Length| Material| Catalogue number
---|---|---|---|---|---
mm| mm
Duct silencer
| BL 125| 125| ****

1000

| ****

Aluminum-polyester jacket, galvanized steel, EPDM gaskets, glass wool insulation

| 520 103 001
BL160| 160| 520 104 001
BL 200| 200| 520 105 001
Air intake/outlet grille – hooded| AN 125| 125| ****

–

| ****

Stainless steel

| 520 106 001
AN160| 160| 520 107 001
AN 200| 200| 520 108 001
Air intake/outlet grille – flat| KA 125| 125| ****

–

| ****

Stainless steel

| 520 109 001
KA160| 160| 520 110 001
KA 200| 200| 520 111 001

ARIA Planner

Design a heat recovery system in 10 minutes!
ARIA PLANNER – selection software, an easy tool that creates a bill of materials needed for each HRV project.

SIMPLE STEPS

STEP 1
Enter the list of rooms from your floorplan
ARIA PLANNER will automatically select the size of the heat recovery unit and required air flows depending on room type and number of occupants.
It will then create air flow balance for a harmonized supply and exhaust ventilation system.
ARIA PLANNER will also determine the number of supply and exhaust points (diffusers) for each room and calculate the number of required ventilation ducts.

STEP 2
Choose the type of connection to heat recovery unit – SIDE or CENTRAL
You will receive a list of components and air supply requirements, all tailored to your home design

STEP 3
Save and download your design

The design contains calculated air flows, a bill of materials tailored to the selected configuration as well as guidelines on installation of the heat recovery system. The document will indicate where and how to install diffusers, how to route ventilation ducts, and where to place the air intake and exhaust outlets. *

ARIA PL ANNER IS AVAIL ABLE ON OUR WEB SITE www.heatpex.pl

HEATPEX Sp. z o.o.
ul. Chrzanowskiego 11,
80-278 Gdańsk,
Poland mob.: +48 661 693 697
e-mail: sales@heatpex.pl
This brochure, together with the information contained herein, is for informational purposes only and does not constitute an offer as defined in the provisions of the Civil Code. HEATPEX reserves the right to introduce content changes and without prior notice.

Download our catalogues and technical documentation

References

• HEATPEX-systemy rekuperacji ARIA, rury preizolowane DELTA
• Rury preizolowane, systemy wentylacji i rekuperacji - producent - Heatpex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>