ECOFLOW EFRIVER600PRO River 600 Pro Smart Extra Battery User Manual
- June 6, 2024
- ECOFLOW
Table of Contents
User Manual
RIVER 600 PRO Extra Battery
(for RIVER 600 PRO only)
Contact us:
support@ecoflow.com
www.ecoflow.com
WARNING
- Keep the product dry and do not expose it to high heat.
- Do not disassemble, puncture or subject the product to a strong external force.
- Recycle and dispose of the product in accordance with local regulations.
- Children and people who are intellectually disadvantaged should only use the product under supervision.
Glossary
The following terms are used in this document to indicate various levels of
potential harm that may be caused by improper operation.
NOTICE
The instructions, if not properly followed, may result in property damage and
minor physical damage.
CAUTION
The instructions, if not properly followed, may result in property damage and
serious physical damage.
WARNING
The instructions, if not properly followed, may result in property damage,
major accident, and serious injury.
WARNING
Read the ENTIRE user manual to be familiar with the features of this product
before operating. Failure to operate the product correctly may result in
damage to the product or personal property and cause serious injury. EcoFlow
will not assume any legal responsibility. DO NOT use the product with
incompatible components or alter the product in any way without following the
instructions provided by EcoFlow. Otherwise, you cannot get after-sales
service from EcoFlow under warranty conditions. These Safety guidelines
include instructions for safety, operation, and maintenance. It is important
to read and follow all the instructions and warnings in the user manual before
assembly, setup, or using the product.
Product Safety Guidelines
WARNING
Improper use may result in fire, property damage or personal injury. Make sure
to use the product according to the following safety rules and guidelines.
Product Use:
-
DO NOT expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries out in the rain or near a source of moisture. Moisture in the device could cause short circuits, component failure, fires, or even an explosion.
-
Never use NON- EcoFlow parts. Go to http://[www.EcoFlow.com](http://www.EcoFlow.com) to purchase new parts. EcoFlow takes no responsibility for any damage caused by the use of non-EcoFlow parts.
-
Never install or remove other modules from the RIVER 600 when it is turned on. Do Not plug or unplug other
modules when the power of the product is turned on, otherwise the power interface may be damaged. -
The product should be used in temperatures between -4 ºF and 140 ºF( -20 ℃ and 60 ℃). The use of products in environments above 140 ºF ( 60 ℃) may cause fire or explosion. Using products below -4 ºF ( -20 ℃) will severely affect the performance of the product. Allow the product to return to a normal operating temperature before
use it. -
DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, it may not work properly and the battery control board may malfunction and cause a serious accident during use.
-
Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on fire, or explode.
-
DO NOT use the product if it was involved in a crash or a heavy bump.
-
If the product falls into the water during use, take the product out immediately and put it in a safe and open area. Keep a safe distance from it until it is completely dry. Never use it again and dispose of it properly as described in the Battery Disposal section below. If the product catches fire, it is recommended to use fire-extinguishing equipment in the following order: water or water mist, sand, fire blanket, dry powder, carbon dioxide fire extinguisher.
-
DO NOT put the machine in a microwave oven or in a pressurized container.
-
Do Not allow pins, wires or other metal pieces to insert to the device case, outlets or controls. Metal pieces may short circuit the product.
-
Avoid collision. DO NOT place heavy objects on the machine.
-
If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and result in energy loss or inability to charge.
Product Charging:
-
Always use EcoFlow approved charging cables. EcoFlow does not respond to any damage caused by using
non-EcoFlow charging cable. -
When charging, please place the product on the ground with no flammable or combustible materials around. To prevent accidents, never leave the machine unattended during charging.
-
DO NOT charge a product immediately after a long heavy load, because the product’s temperature may be too high. DO NOT charge a product until it cools down to room temperature. The product may be unable to charge out of the temperature range 32 ºF to 104 ºF 0 to 40 ℃. The ideal charging temperature range is 71 ºF to 82 ºF(22 ℃ to 28 ℃ ).
Product Storage and Transportation:
- Keep the product out of the reach of children. If any children accidentally swallow parts, please go to a doctor immediately.
- If a low-battery warning appears, charge the battery before storing it. Otherwise, long-term storage may cause damage to the battery in the product. Batteries in the product will enter hibernation mode if it is depleted and stored for a long time. Recharge the product can bring the battery out of hibernation.
- DO NOT place the product near a heat source, such as a car in direct sunlight, a fire source, or a heating stove.
- Store the product in dry environments. DO NOT place the product where it may contact with water.
- Make sure no small metal objects can fall on or around the product while in storage.
- Never transport a product with a battery power level higher than 30%.
Product Battery Disposal:
-
Dispose of the product in specific recycling boxes only after a complete discharge. Batteries are hazardous
chemicals. Please strictly follow your local regulations regarding battery disposal and recycling. -
Dispose of the product immediately if it cannot be powered on after over-discharging.
Product Maintenance:
- Never store the product in environments below -4 ºF (-20 ℃ ) or above 140 ºF (60 ℃ ).
- If the product is not used for a long time, the battery life may be reduced.
- Fully charge and discharge the battery at least once every 3 months to keep the battery healthy.
Travel Notice:
It is forbidden to carry lithium batteries and equipment with a capacity
greater than 160Wh on an airplane due to the regulation; Do Not bring this
product on flights.
RIVER 600 PRO Extra Battery Use, Care and Safety Guide
CONGRATULATIONS!
You now have an extra battery for the best quality lithium-ion generator in
the world! This brief pamphlet is meant to help you. Please take some time to
read it before using the product. Read it through to fully understand how to
use the extra battery of the lithium-ion generator!
NOTICE
To turn RIVER 600 PRO Extra Battery on/off, you need to press and hold the
Power Button. Before connecting it to RIVER 600 PRO, make sure that RIVER 600
PRO Extra Battery is turned off. Get to know your RIVER 600 PRO Extra Battery,
follow this step-by-step introduction to each of RIVER 600 PRO Extra Battery’s
ports, buttons, display screens, and more.
RIVER 600 PRO Extra Battery’s Features
1. Expansion Power Port
2. High-Temperature Warning Indicator
3. Battery Warning Indicator
4. Battery Level Indicator
5. Low-Temperature Warning Indicator
6. Power Button
1 . Expansion Power Port
This port is used to connect RIVER 600 PRO to a computer. An expansion power
cable is required to charge, discharge, and upgrade the port. It supports a
maximum of 660W charging and 720W discharging of RIVER 600 PRO Extra Battery.
2. High-Temperature Alarm Indicator
When the ambient temperature is too high (above 140 ºF/ 60 ℃ ), the red high-
temperature warning light will flash. Please move the device to a location
with a suitable temperature (-4 ºF to 140ºF /-20 ℃ to 60 ℃ devices to
function normally. When the ambient temperature is above 113 ºF( 45 ℃) while
the device is being ) for the charge, the red high-temperature warning light
will flash as well. Please move the device to a location with a suitable
temperature (32 ºF to 113ºF/ 0 ℃ to 45 ℃ ) for the device to charge normally.
3. Battery Warning Indicator
When the battery malfunctions, Try resolving the issue by restarting the
device. Alternatively, please contact customer service.
4. Battery Level Indicator
The battery life is indicated by five lights. When the device is being
charged, the lights will flash in sequence. When the battery is
malfunctioning, all five lights will flash together at the same time.
5. Low-Temperature Warning Indicator
When the ambient temperature is too low (below -4 ºF /-20 ℃ ), the blue low-
temperature warning light will flash. Please move the device to a location
with a suitable temperature (-4 ºF to 140ºF ) for the device to function
normally. When the ambient temperature is below 0 /-20 ℃ to 60
℃ ℃ while the device is being charged, the blue low-temperature warning light
will flash as well. Please move the device to a location with a suitable
temperature (32 ºF to 113ºF/ 0 ℃ to 45 ℃ ) for the device to charge normally.
6. Power Button & LCD Display Screen ON/OFF Power Indicator
Press and hold the power button to turn the RIVER 600 PRO Extra Battery on and
off. When the RIVER 600 PRO Extra Battery is turned on, the display will light
up. To turn on or off the display screen and keep the RIVER 600 PRO Extra
Battery running, short press the power button. When none of the ports are in
use, the USB Output Indicator Light will start to blink. This shows that the
RIVER 600 PRO Extra Battery is in idle mode. After being in idle mode for 5
minutes, the RIVER 600 PRO Extra Battery’s display will go to sleep. At this
time, the robot will continue to draw power from its battery. After being in
idle mode for 30 minutes, the RIVER 600 PRO Extra Battery will automatically
turn off itself.
RIVER 600 PRO Connect with RIVER 600 PRO Extra Battery
Get the RIVER 600 PRO, RIVER 600 PRO Extra Battery, and expansion power cable
ready. Then turn off the power of RIVER 600 PRO and RIVER 600 PRO Extra
Battery. Follow the steps below. If the devices are not turned off, they
cannot be successfully connected.
1. Open the softcover below the AC port of RIVER 600 PRO to expose the
expansion power port. Connect the expansion power cable to the port. Tighten
the screws on both sides of the port to secure the connection.
2. Open the dust cover of RIVER 600 PRO Extra Battery to expose the expansion
power port. Connect the other end of the expansion power cable to the port.
Tighten the screws on both sides of the port to secure the connection.
3. Turn on the power button of RIVER 600 PRO or RIVER 600 PRO Extra Battery.
If the display of RIVER 600 PRO shows the expansion battery pack icon, the
connection is successful. When connecting the devices for the first time, it
is recommended to fully charge them first. Fully charge RIVER 600 PRO and
RIVER 600 PRO Extra Battery and ensure that the voltage of both devices is
consistent to maximize the performance of RIVER 600 PRO Extra Battery.
TECHNICAL SPECIFICATIONS
General Specs|
---|---
Net Weight| 15.4 lbs (7kg)
Dimensions| 11.3 x 7.1 x 8.3 in (28.8 x 18 x 21 cm)
Capacity| 720Wh (28.8V)
Testing and certification| UL CE FCC RoHS
Outputs|
Expansion Power Port| 24.4V-33.6V, 720W Max
Input|
Expansion Power Port| 33.6V, 660W Max
Battery|
Cell Chemistry| Lithium-ion
Cell Type| 18650
Discharge Temperature| -4-140°F +/-5°F(-20-60°C +/-3°C)
Charge Temperature| 32-113°F +/-5°F(0-45°C +/-3°C)
Shelf Life| 1 Year (after fully charged)
Life Span| 800 Cycles (80%+)
FAQs
How do I care for RIVER 600 PRO Extra Battery?
The RIVER 600 PRO Extra Battery is versatile, so it is likely that simple
cleaning will be required from time to time. Use a dry, non-abrasive cloth to
wipe. If you want to wipe more cleanly, we recommend that you use a special
detergent for mobile phones and computer screens. DO NOT expose the product to
large amounts of water!
How do I store RIVER 600 PRO Extra Battery?
Please store RIVER 600 PRO Extra Battery in a dry place and avoid direct
contact with water. In order to extend battery life, if long-term storage is
required, please charge it to 0% -50%, then turn off the main witch and store
at room temperature.
How do I use RIVER 600 PRO Extra Battery safely?
Please use RIVER 600 PRO Extra Battery under temperature conditions within its
operating temperature range. Using RIVER 600 PRO Extra Battery outside the
optimal operating temperature range may cause RIVER 600 PRO Extra Battery to
exceed its safe and effective working limits. DO NOT immerse RIVER 600 PRO
Extra Battery in water. RIVER 600 PRO Extra Battery is not waterproof. Doing
so will void the warranty.
WHAT’S IN THE BOX
Documents / Resources
|
ECOFLOW EFRIVER600PRO River 600 Pro Smart Extra
Battery
[pdf] User Manual
EFRIVER600PRO, River 600 Pro, Smart Extra Battery
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>