CosmoLiving 042021 PK Westerleigh Pink 4 Drawer Dresser User Manual
- June 10, 2024
- CosmoLiving
Table of Contents
CosmoLiving 042021 PK Westerleigh Pink 4 Drawer Dresser
Product Information
The product is a piece of furniture that requires assembly. It comes with various panels, drawers, legs, and hardware components to be assembled using a cam lock fastening system. The product also comes with a back panel that is an essential structural component and must be installed correctly. The product has an estimated assembly time and requires tools such as a flat head screwdriver, Phillips head screwdriver, and a hammer.
Product Usage Instructions
- Read the instruction booklet carefully and keep it for future reference.
- Separate and count all the parts and hardware before starting the assembly process.
- Make sure you have enough space to carry out the assembly process comfortably.
- Use the required tools such as a flathead screwdriver, Phillips head screwdriver, and a hammer.
- If using a power drill or power screwdriver for screwing, slow down and stop when the screw is tight to prevent stripping.
- Follow the instructions step-by-step in the proper order.
- Ensure proper orientation of cam locks during assembly.
- Attach the back panel properly using nails and ensure that the unit is square.
- Install the legs and drawer supports as per the instruction booklet.
- Attach the drawer sides, fronts, backs, and bottoms to their appropriate positions.
- Install the molding as per the instruction booklet.
- Attach the handles to the drawers.
- Refer to the instruction booklet for any additional information or help needed during the assembly process.
If you require any assistance during the assembly process, please contact the customer service team. They are available on the provided toll-free number or visit the manufacturer’s website for further assistance.
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to)
- Do not allow children climb on unit
- Put heavy items on lower shelves or drawers
Contact Us
Do NOT return this product! Contact our friendly customer service team first for help
Visit ameriwoodhome.com
Helpful Hints
- Open your item in the area you plan to keep it for less heavy lifting
- Identify, sort and count the parts before attempting assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (left) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture
Before You Start
- Read through each step carefully and follow the proper order
- Separate and count all your parts and hardware
- Give yourself enough room for the assembly process
- Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer
- Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
- Failure to do so may result in stripping the screw.
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
Board Identification
Not actual size
Part List
Actual Size
Not Actual Size
INSTALLATION
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY
Attached back panel as shown nailing straight into the raw edges.
Ensure that the unit is square.
Distance from corner to corner must be equal as shown.
For Masonry, Concrete, or other wall materials:
Consult your local hardware store for appropriate anchors to securely attach
the safety bracket.
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED
WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries can occur from furniture tip over.
To prevent tip over:
- Install tipover restraint provided
- place heaviest items in the lowest drawers
- Unless specifically designed to accommodate, do not set TVs or other heavy objects on the top of this product
- Never allow children to climb or hang on drawers, door, or shelves
- Never open more than one drawer at a time
Use of tip over restraints may only reduce, but not eliminate the risk of tip over
OPTION 1: Attachment into a wall stud (preferred method)
- Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket aligned in this location.
- To make driving the screw easier, you can drill a 1/8” diameter pilot hole (3mm) through the safety bracket into the stud.
- Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully tighened.
OPTION 2: Attachment into drywall
- Locate your unit where desired against a wall and mark the wall through the safety bracket, then move your unit aside.
- Drill a 3/16” diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole until it is flush.
- Move your unit into location and fasten the wall bracket to the wall anchor with the screw.
- Tighten the screw that was not fully tightened.
Maximum Loads
This unit has been designed to support the maximum loads shown. Exceeding
these load limits could cause sagging, instability, product collapse, and/or
serious injury.
Warning: Risk of serious injury to person – do not place a television on this furniture . This furniture is not approved for use with a television.
Certificate of Confirmity
-
This certificate applies to Dorel Home Furnishings, Inc. product identified by this instruction manual.
-
This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint ( 16 CFR 1303).
-
This product is distributed by: Dorel Home Furnishings, Inc.
410 East First Street South,
Wright City, MO 63390
636-745-3351 -
Site of Manufacturer: Muar, Malaysia.
-
See front page of instruction manual for date of manufacturer.
Register your product to receive the following:
- New trend details -sneak peek on what’s new
- Surveys -have a voice within our community
- Exclusive deals and discount codes
- Quick and easy replacement part service
- To register your product, visit Ameriwoodhome.com
Visit your local retailer’s website, rate your purchased product and leave us some feedback!
We would like to extend a big “Thank You” to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback
Contact our customer service team for help first
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am – 5pm CST
Visit: www.ameriwoodhome.com
References
- Ameriwood Furniture | Living Room Furniture | Entertainment Centers
- Ameriwood Furniture | Living Room Furniture | Entertainment Centers