evolur 0322R2-927 Stilnovo Mid Century Convertible Crib Owner’s Manual

: June 10, 2024
: evolur

0322R2-927 Stilnovo Mid Century Convertible Crib

STILNOVO MID CENTURY

Convertible Crib
Owner’s Manual

Scan the QR code to register your product
https://www.evolurbaby.com/customer-care/product-registration/

Read all instructions before assembling and using product.
IMPORTANT – Keep instructions for future use.

SAFE SLEEP TIPS

Adult Assembly
Required.

DO NOT use the product if it is
damaged, broken, and/or components are
missing or broken.

Do Not Use Power
Drills or Drivers.

For a Safe and comfortable Sleep
experience, we suggest using Evolur
Greengaurd Gold Certified Full-Size Mattress.

Small parts may
present choking
hazard prior to assembly.

Please read the instructions
thoroughly. Identify all
parts & hardware.

To protect your parts during assembly,
please place them on a soft surface.

To clean surface, use only water on a damp cloth. Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the
protective coating.

Contact Evolur Inc
in case of any
assistance needed.

www.evolurbaby.com/help

THANK YOU…

…. for choosing Evolur and congratulations on joining our family;
a family that has been transforming lives for over 30+ years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to supply you with safe,
and affordable baby products and accessories.

LIMITED WARRANTY:

Evolur warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.

www.evolurbaby.com/help

WARNINGS

FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
TO REDUCE THE RISK OF SIDS(SUDDEN INFANT DEATH SYNDROME), PEDIATRICIANS
RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, UNLESS
OTHERWISE ADVISED BY YOUR PHYSICIAN.
CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR
SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT EVOLUR INC – 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854 FOR REPLACEMENT PARTS.
DO NOT USE A WATER MATTRESS WITH THIS CRIB.
IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS. STRANGULATION HAZARD:
STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.
TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS OF BODY OR CLOTHING ON LOOSE FASTENERS.
DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD.
INFANTS CAN SUFFOCATE ON SOFT BEDDING.
NEVER ADD A PILLOW, COMFORTER OR PADDING.
NEVER PLACE ADDITIONAL PADDING UNDER INFANT.
NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS, BECAUSE THEY CAN CAUSE SUFFOCATION.
INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO SMALL. ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN (69 CM) BY 51-5/8 IN (131 CM), WITH A THICKNESS NOT EXCEEDING 6 IN (15CM) AND A MINIMUM THICKNESS
OF 4 IN (10 CM). THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO SEAM OR EDGE TO EDGE WHERE APPROPRIATE.
FALL HAZARD:
WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT. AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE (DISREGARD FOR NON-DROP SIDE CRIB).
DO NOT LEAVE CHILD IN CRIB WITH SIDES LOWERED. BE SURE SIDE IS IN RAISED AND LOCKED POSITION WHENEVER CHILD IS IN CRIB (DISREGARD FOR NON-DROP SIDE CRIB).
STOP USING CRIB WHEN CHILD BEGINS TO CLIMB OUT OR REACHES THE HEIGHT OF 35 IN (89 CM).
WHEN STORING CRIB USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.
AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS OF TIME.
FOLLOW WARNINGS ON ALL PRODUCTS IN CRIB.
DO NOT USE THIS CRIB IF YOU CANNOT EXACTLY FOLLOW THE
ACCOMPANYING INSTRUCTIONS.
DO NOT USE THIS CRIB FOR A CHILD WHO CAN CLIMB OUT OF IT OR WHO IS TALLER THAN 90 CM.
DO NOT PLACE IN OR NEAR THIS CRIB ANY CORD, STRAP OR SIMILAR ITEM THAT COULD BECOME WRAPPED AROUND A CHILD’S NECK.
DO NOT PLACE THIS CRIB NEAR A WINDOW OR A PATIO DOOR WHERE THE CHILD COULD REACH THE CORD OF A BLIND OR CURTAIN AND BE STRANGLED.
CHECK THIS CRIB REGULARLY BEFORE USING IT AND DO NOT USE IT IF ANY PARTS ARE LOOSE OR MISSING OR IF THERE ARE ANY SIGNS OF DAMAGE. DO NOT SUBSTITUTE PARTS. CONTACT THE MANUFACTURER IF REPLACEMENT PARTS OR ADDITIONAL INSTRUCTIONS ARE NEEDED.
USE A CRIB MATTRESS THAT IS NO THICKER THAN 15 CM AND IS OF SUCH A SIZE THAT, WHEN IT IS PUSHED FIRMLY AGAINST ANY SIDE OF CRIB, IT DOES NOT LEAVE A GAP OF MORE THAN 3 CM BETWEEN THE MATTRESS AND ANY PART OF THE SIDES OF THE CRIB.
CHILDREN CAN SUFFOCATE ON SOFT BEDDING. DO NOT PLACE PILLOWS, COMFORTERS OR SOFT MATTRESS IN THIS CRIB.

PARTS

If there are any missing parts, please contact Evolur before using the product.

panel

If there are any missing parts, please contact Evolur before using the product.

panel parts

www.evolurbaby.com/help

HARDWARE

If there are any missing parts, please contact Evolur before using the product.

tools screw

CRIB ASSEMBLY – LEGS ASSEMBLY

1

place 1a. Place the Right Leg Support Plate (1-R) on a soft surface with the bottom facing up.
1b. Note: the top of the plates are labelled.
1c. Position the Front Leg (2) and the Rear Leg (2) on the Right Leg Support Plate (1-R). The legs need to be angled outwards in the direction of the threaded sleeves as shown in the illustration. Similarly repeat for the Left Support Plates.
1d. Insert the Washer (J) and the Spring Lock Washer (C) into the Bolt (A) and insert them to the holes present in the legs.
1e. Tighten the bolts using the Allen Key (K) provided.
1f. Similarly, follow the above steps to assemble the Left legs.
NOTE: Do not overtighten the bolts.

CRIB ASSEMBLY – BOTTOM FRAME ASSEMBLY

2

assembly screw 2a. Align the Front Bar (3) to the assembled legs as shown in the
illustration.
2b. Ensure the threaded sleeves on the
Support Plates are facing outward
while assembling the Front Bar.
2c. Attach the Bolts (E) into the
insertions provided on the front bar
securing the parts.
2d. Tighten the bolts using the Allen
Key (K) provided.

CRIB ASSEMBLY – SIDE ASSEMBLY

3

3a. Align the Left Panel (5) and Right Panel (4) to the assembled bottom frame of the crib as shown in the illustration.
3b. Attach the Bolts (B) and Bolts (H) into the
insertions provided on the side panels securing
the parts.
3c. Tighten the bolts using the Allen Key (K)
provided.

CRIB ASSEMBLY – HEADBOARD ASSEMBLY

4

4a. Align the Headboard Panel (6) to the side panels as shown in the illustration.
4b. Attach the Bolts (I) into the insertions provided on the headboard securing the parts.
4c. Tighten the bolts using the Allen Key (K)
provided.

CRIB ASSEMBLY – MATTRESS SUPPORT ASSEMBLY

5

5a. Attach all the corners of the
Mattress Support Panel (7) to the
headboard and side panels as
shown in the illustration.
5b. Attach the Bolts (D) into the
insertions and tighten the bolts
using the Allen Key (K) provided.
5c. Note that the Lowest Position of
the Mattress Support Panel will
be for Toddlers babies (who can
stand up and walk), Mid Position
is for Infant babies (who start to
turn and sit up), and the Highest
Position is for newborn babies.
5d. Ensure that the Mattress
Support Panel is flat side up and
not at a slant.

CRIB ASSEMBLY – FOOTBOARD ASSEMBLY

6

6a. Align the Footboard Panel
(8) to the assembled side
and front panels as shown
in the illustration.
6b. Attach the Bolts (E) into
the insertions provided on
the side panels securing
the parts.
6c. Tighten the bolts using
the Allen Key (K) provided.

CONVERSION MODES – DAYBED ASSEMBLY

1

1a. To convert the crib to a Daybed, you must
remove the Footboard of the crib.

1b. Attach the Bolts (F) into the Nuts (G) through the insertions provided on both the side panels as shown in the illustration.

1c. Tighten the bolts using the Allen Key (K)
provided.

NOTE:

Make sure mattress support is at the lowest position.

www.evolurbaby.com/help

CONVERSION MODES – TODDLER BED ASSEMBLY

2

2a. To convert the crib to a
Toddler Bed, you must
remove the Footboard of
the crib.
2b. Attach the Stabilizer Bar
and Toddler Guard Rail
using the bolts from the
Footboard removal.
2c. Make sure to follow the
complete instructions
provided with the Toddler
Guard Rail.

NOTE:
Make sure mattress support is at the lowest position.
Make sure to use the Stabilizer Bar
that is included with Evolur Universal
Toddler Guard Rail (SKU- 811) to
convert the crib to toddler bed.

Guard Rail and Stabilizer Bar (NOT INCLUDED, SOLD SEPARATELY)

CONVERSION MODES – FULL SIZE BED ASSEMBLY

3

3a. To convert the crib to a
Full-Size bed, you must
remove the Footboard of
the crib.
3b. Remove the Mattress
Support Panel, followed
by Left and Right Panels
and the legs.
3c. Make sure to follow the
complete instructions
provided with Bed Rails.

NOTE:
Make sure to use the Evolur Bed Rails (SKU-812) in order to convert the crib to a
Full-size Bed with Footboard.
Do not put the mattress directly on the wooden slats, use either a Bunky Board, Particleboard, or low-profile Box Spring before placing the mattress.

Bed Rails (NOT INCLUDED, SOLD SEPARATELY)

FURNITURE CARE INSTRUCTIONS

ROOM CLIMATE CONTROL:
• Wood, when first cut contains more than 50 percent water. When it is prepared for
furniture construction it is placed in a Kiln and the moisture content is brought down
to 8 to 10 percent. Wood is porous and responds to its environment. If the room has
high humidity it will absorb it and expand and if the humidity is low it will lose
moisture and shrink.
• It is important that the humidity levels in the room be controlled from extremes of
too much humidity or too little. Furniture should not be placed close to the
air-conditioning outlets, fire places, radiators, space heaters, humidifiers or
dehumidifiers. Exposure to extreme variations of temperature and humidity can
damage any fine wood product.

THE IDEAL ENVIRONMENT FOR FINE FURNITURE:
• Fine wood furniture will have fewer problems when its environment is controlled at a
temperature between 65 and 75 degrees and a relative humidity between 35 and 40
percent. Wood placed in an environment outside of those limits can and will shrink
or expand and may develop some small cracks which are not material or structural
defects.

STICKING DOORS AND DRAWERS:
• With the minor changes in temperature and humidity, doors and drawers may swell
and be difficult to open or close. Tolerances have been built into the units but
extreme conditions may still cause sticking. This will adjust back to normal over
time but until it does consider using a dehumidifier or rub candle wax or paraffin on
sides that stick.

AVOID DIRECT SUNLIGHT:
• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some
cases darken them. It can also cause crazing or hair line cracks in the finish. White
finishes will yellow naturally over time and exposure to direct sunlight will hasten
this natural process along with some woods darkening naturally over time; this is
not considered to be a quality defect.

PROPER STORAGE:
• If you need to put your furniture in storage for any period of time do not store them
in a damp basement or hot dry attic. Allow air movement around the furniture and
do not stack anything on it.

IN GENERAL:
• Protect furniture surface from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, markers and crayons.
• Oils from potpourri and other scented items can damage the finish of the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breath by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year. Over polishing
can distort the natural finish of the product.
• Do not wax the furniture, as wax build up can destroy natural finish of the product.
• When moving furniture always lift the unit. Do not push or drag it to avoid damage
to legs.
• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use the abrasive
cleaners.
• Do not scratch or chip the finish.
• Inspect the product periodically, contact Evolur Inc for replacement parts or
questions.
• Do not store the product or any parts in extreme temperatures and conditions such
as a hot attic or a damp, cold basement. These extremes can cause a loss of
structural integrity.
• To preserve the luster of the high-quality finish on your product, it is recommended
to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty
of this fine finish.
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.

YOU DID IT!
Congratulations Mom & Dad!
It’s time to create your dream nursery. A safe, elegant
handcrafted crib that grows with your little one.

1532 S. WASHINGTON AVE STE1
PISCATAWAY, NJ 08854-9908
www.evolurbaby.com
Follow Us On
to get your nursery featured on our social media.
E-mail: info@evolurbaby.com
@Evolurbaby @evolurbaby
Chat with us!
Scan the QR code to Live Chat.
Enter our monthly giveaway!
Scan the QR code to register.
TM