VIZIO M213ad-K8 AIO Soundbar User Manual

: June 10, 2024
: Vizio

Table of Contents

M213ad-K8 AIO Soundbar
VIZIO M-Series All-in-One 2.1 Sound Bar
Package Contents
Controls & Connections
Bottom of Sound Bar
Front of Sound Bar

M213ad-K8 AIO Soundbar

VIZIO M-Series All-in-One 2.1 Sound Bar

The VIZIO M-Series All-in-One 2.1 Sound Bar is a high-quality
audio system designed to enhance your home entertainment
experience. The sound bar features built-in speakers and a
subwoofer, providing powerful and clear sound for your movies, TV
shows, music, and more.

Package Contents

VIZIO Sound Bar
Remote Control with 2x AAA Batteries
Power Cable
HDMI Cable
2 x Wall Mount Brackets
Wall Mount Template
Quick Setup Guide

Controls & Connections

Bottom of Sound Bar

AUX In Analog Audio In (Stereo 3.5mm)
AUX VA** Analog Audio In (Stereo 3.5mm)
USB* In (Supports .WAV and .MP3 file format playback only)
Power Port
Digital Optical Audio In
HDMI In
HDMI (eARC) Out to TV

**Only use this port to connect a Voice Assistant device. See
Connecting to a Voice Assistant on page 15 for more information.

Front of Sound Bar

Power: Press to turn on or off.
Input: Press to change the audio source.
Bluetooth Input: Hold to pair (See ‘Bluetooth Pairing’ for more
information).
Volume: Increase or decrease the loudness of the audio.

Connecting to Your TV

Choose the best possible connection cable type and connect it to
your TV. Not all cables are included. Be sure the TV port is an
audio output, not an audio input.

Option 1: Digital Optical Cable

Connect the digital optical cable to your TV’s digital audio
output and the sound bar’s digital optical audio input.

Option 2: 3.5mm to RCA Cable

Connect the 3.5mm to RCA cable to your TV’s headphone output and
the sound bar’s AUX In audio input.

Option 3: HDMI (eARC) Cable

Connect the HDMI (eARC) cable to your TV’s HDMI (ARC or eARC)
port and the sound bar’s HDMI (eARC) Out to TV port. This is the
recommended connection for the best possible sound quality.

Note: Not all TVs have the audio outputs shown. To connect
the sound bar directly to your other devices (Blu-ray player, game
system, etc.) see your device’s user manual.

First-time Setup

Choose the best possible connection cable type and connect it
to your TV.
Connect the power cable to the sound bar AC IN as shown. Plug
the power cable into an electrical outlet.
Remove the battery cover by gently sliding it away from the
remote.
Insert the included batteries and gently slide the battery
cover back into place.
Turn on your TV and select the audio output to the sound
bar.
Turn on the sound bar by pressing the power button on the
remote or on the sound bar itself.
Use the remote control to adjust the volume and other settings
as desired.

Customer Support

If you have any questions or need further assistance, please
visit support.vizio.com or contact
VIZIO for accessibility support at: Email: accessibility@vizio.com Phone:
1-877-698-4746

VIZIO
M-SSeerrieiessTMTM All-in-One 2.1 User Manual
Model: M21133ad-K8
Please read this guide before using the productt..

ENG – ii

Accessibility Contact VIZIO for accessibility support at: Email: accessibility@vizio.com Phone: 1-877-698-4746
Binding Arbitration Agreement and Class Action Waiver This purchase is subject to full VIZIO Terms and Conditions, including Binding Arbitration Agreement and Class Action Waiver, which may be viewed at vizio.com/en/terms/terms-of- service. By using this device, you accept those Terms and Conditions. You have the right to opt out of the Binding Arbitration Agreement and Class Action Waiver within 60 calendar days of your purchase. Please refer to the Limited Warranty section of this User Manual or view the full VIZIO Terms and Conditions for opt-out instructions.
ENG – iii

IMPORTANT SAFETY INSTRUCTIONS
Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. · Heed all warnings. · Follow all instructions. · Do not use this Unit near water. · Clean only with a dry cloth. · Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. · Do not install near any heat sources such as radiators, heat registers, stoves, or other Unit (including amplifiers) that produce heat. · Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. · Protect the power cord from being walked on or pinched particularly at the ends where the plug is located, near convenience receptacles, or where they exit from the Unit. · Only use attachments/accessories specified by the manufacturer. · Use only with the stand, tripod, or bracket specified by the manufacturer, or sold with the Unit. When a cart is used, use caution when moving the cart/Unit combination to avoid injury from tip-over. · Unplug this Unit during lightning storms or when unused for long periods of time. · Refer all servicing to qualified service personnel. Servicing is required when the Unit has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Unit, the Unit has been exposed to rain or moisture, does not operate normally, or has been dropped. · To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit. · Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners. · Always use the accessories recommended by the manufacturer to ensure compatibility. · When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage. · Slots and openings in the back and bottom of the Unit are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided. · Never push any object into the slots and openings on your Unit. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit. · Do not block the subwoofer ports. Allow for 1-2 inches of space around all sides for ventilation. · WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort. · When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord. · Do not overload power strips and extension cords. Overloading can result in fire or electric shock. · The wall socket should be located near your Unit and be easily accessible. · Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
ENG – iv

IMPORTANT SAFETY INSTRUCTIONS
· Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Unit yourself.
· Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock.
· Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause fire or electric shock.
· Ensure that the power cord and any other cables are unplugged before moving your Unit. · When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When
your Unit will not be used for an extended period of time, unplug the power cord. · To reduce risk of electric shock, do not touch the connector with wet hands. · Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the
operator. · Read and follow all warnings printed on the Unit. · WARNING: This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain, or moisture. · CAUTION: Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type. · Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire. · If the main wall plug or the appliance coupler is disconnected, the disconnected device will remain readily operable upon reconnection to an appropriate power source. · No open flames, such as lighted candles, should be placed on the Unit. · The ventilation should not be impeded by covering the ventilation openings with items,such as newspapers, table-cloths, curtains, etc. · The equipment shall be used at maximum 35 degree C ambient temperature.
WARNING: To reduce the risk of fire or electric shock, do not expose this Unit to rain or moisture.

The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the appliance that may be sufficient magnitude to constitute a risk of shock to persons.

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

Warning: This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
ENG – v

TABLE OF CONTENTS
Package Contents…………………………………………………………………………………………………………………….. 1 Controls & Connections ……………………………………………………………………………………………………………. 2 First-time Setup ……………………………………………………………………………………………………………………….. 4 Using the Remote …………………………………………………………………………………………………………………….. 7 Proper Placement …………………………………………………………………………………………………………………….. 8 Mode & Level Settings………………………………………………………………………………………………………………. 9 Using Button Combinations………………………………………………………………………………………………………. 11 Programming the Sound Bar …………………………………………………………………………………………………….. 12 Bluetooth Pairing……………………………………………………………………………………………………………………… 13 Using Bluetooth Mode………………………………………………………………………………………………………………. 14 Connecting to a Voice Assistant ……………………………………………………………………………………………….. 15 Advanced Setup ……………………………………………………………………………………………………………………….. 17 Connecting with HDMI ARC ………………………………………………………………………………………………………. 18 Wall- mounting………………………………………………………………………………………………………………………….. 20 Product Registration and Support …………………………………………………………………………………………….. 22 Help & Troubleshooting …………………………………………………………………………………………………………….. 23 Limited Warranty ……………………………………………………………………………………………………………………… 24 Legal & Compliance ………………………………………………………………………………………………………………….. 27 Specifications ………………………………………………………………………………………………………………………….. 28
ENG – vi

Package Contents

VIZIO Sound Bar

Remote Control with 2x AAA Batteries

Power Cable

HDMI Cable

2 x Wall Mount Brackets

Wall Mount Template

Quick Setup Guide Get easy setup videos and more.
Scan with your phone camera or QR reader.
Connect. 1· Plug in the power cable to power on your
sound bar.

vizio.com/qr/M213ad-K8

HDMI (ARC or eARC)

HDMI OUT (ARC)

2· Then use the included HDMI cable to connect to your TV.
Why HDMI? Highest Quality Connection. Connect to the HDMI ARC/eARC port on your TV for the best possible sound quality.

Unlock the best picture and audio quality with a VIZIO SmartCast® TV.
Scan here to shop our M-seriesTM TVs:

More questions?
Get customer support help and view the User Manual here:

support.vizio.com

Quick Setup Steps

ENG – 1

Controls & Connections

Bottom of Sound Bar

AUX In Analog Audio In (Stereo 3.5mm)

AUX VA** Analog Audio In (Stereo 3.5mm)

USB* In

Power Port

Digital Optical Audio In

HDMI In

HDMI (eARC) Out to TV

*Supports .WAV and .MP3 file format playback only. **Only use this port to connect a Voice Assistant device. See Connecting to a Voice Assistant on page 15 for more information.
ENG – 2

Front of Sound Bar

Controls & Connections
Right Side

Power Press to turn on or off.
Input Press to change the audio source.
Bluetooth Input Hold to pair.
(See `Bluetooth Pairing’ for more information.)

Volume Increase or decrease the
loudness of the audio.
ENG – 3

First-time Setup

1

Choose the best possible connection cable type and connect it to your TV.* (Not all cables are included.)

Bottom of Sound Bar

Digital Optical Cable**

OR

3.5mm to RCA cable

OR

BEST
HDMI eARC Cable

*Not all TVs have the audio outputs shown. To connect the sound bar directly to your other devices (Blu-ray player, game system, etc.) see your device’s user manual.
ENG – 4

Be sure the TV port is an audio output, not an audio input.

**Some TVs do not pass through digital audio: When using the digital input, if there is no audio, try: · setting the TV output to PCM, or · connecting directly to your Blu-ray or other source.

Bottom of Sound Bar

First-time Setup

2

Connect the power cable to the sound bar AC IN as shown. Plug the power cable into an electrical outlet.

ENG – 5

First-time Setup

3

Remove the battery cover by gently sliding it away from the remote.

4

Insert the included batteries and gently slide the battery cover back into place.

Top

When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell `AAA’ alkaline batteries.

After turning on both your TV and sound bar, it will automatically begin searching for an active input.*

5

The LED indicator on the front of the sound bar will begin cycling in different colors through inputs until an audio source is detected.**

Tip: Pressing the INPUT button will stop the auto detect function.

Input

Power

You can press the INPUT button to switch between audio sources. For example, if you connected your TV to HDMI, set the sound bar to HDMI.
*Occurs only during first-time set up. **Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT button for 4 seconds.
ENG – 6

Input Change the input source.* (Long press for Auto Input Search) (Long 10 second press to enable/disable AUX VA)
Virtual: X Turn Virtual: X on or off
Bluetooth Press to go to Bluetooth Mode
(Long press for Pairing Mode) (Long 10 second press to enable/disable BT VA)
Previous Return to previous track.
(Changes audio settings)
Up/Down Changes audio settings
EQ Settings Change equalizer settings
Bass Use the Previous/Next buttons to
increase/decrease the bass level
Mute Mute/unmute. (Long press to turn LED power indicator and voice notifications on/off)

Using the Remote
Power Turn on or off
TruVolume Turns TruVolume on or off.
OK Select an option, play or pause. (Long press for Info) Next Skip to the next track. (Changes audio settings)
Volume +/Increase and decrease volume
Night Mode Turns Night Mode on or off
Treble Use the Previous/Next buttons to increase/decrease the treble level
*Press INPUT then Previous to select previous input. Press INPUT then Next to select Bluetooth input.
ENG – 7

Proper Placement
For the best surround sound experience, position the sound bar as shown. The sound bar should be close to ear level (approx. 2-3 ft. off the floor).
Sound bar is centered below the TV.
(If your TV permits it, you can also slide the sound bar underneath the TV.)
ENG – 8

Mode & Level Settings

The LED indicators will behave differently with each function.

LED Indicators are located here.

Function Input

LED Behavior
The single LED will show a color according to the input.

Description

Press the INPUT button on the remote to cycle through the available inputs. Press and hold the INPUT button for 3 seconds to enable the auto input detect function.Specific inputs will show a different LED color:

· AUX In: Green · AUX VA: Violet · Digital Optical: Red

· HDMI eARC: Magenta · HDMI In: Yellow · Bluetooth: Blue · USB: Orange

Bluetooth Pairing DTS Virtual: X

Searching: Flash from left to right continuously.
On Off

Press and hold the button on the remote. The sound bar will be discoverable for 15 minutes. You can now search for the sound bar (VIZIO M213ad) using your Bluetooth Device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the sound bar.
Press the VRT: X button to enable/disable Virtual: X. When ON, all inputs will produce a virtual sound technology that simulates the effect of having overhead sound. When OFF, all sources will play back in stereo.

DTS TruVolume

On

Press the TVOL button to enable/disable TruVolume. When ON, TruVolume provides a

Off

consistent and comfortable volume level for a more enjoyable listening experience.

Equalizer Mode

Music Movie Game Direct Dialogue

Press the EQ button to cycle through preset equalizer settings: Music, Movie, Game, Dialogue, Direct. A voice notification will also announce each EQ setting.
Note: Movie mode is on by default.

ENG – 9

Mode & Level Settings

Function Bass Level

LED Behavior
Three center LEDs indicate level 0

Description
Press the BASS button and then use the Next/Previous buttons to increase/decrease the bass level. The LED indicators will move to the right with increasing levels and left with decreasing levels. Decreasing the bass level to the lowest setting will reduce bass and subwoofer levels on the bar. This is best for watching TV late at night in a quiet environment.

Treble Level Night Mode
Auto VA

Three center LEDs indicate level 0.
On Off
Off AUX BT

Press the TREB button and then use the Next/Previous buttons to increase/decrease the treble level. The LED indicators will move to the right with increasing levels and left with decreasing levels.
Press the NIGHT button to enable/disable Night Mode. When enabled (On), the sound bar will lower bass frequency levels to provide a more quiet environment (ideal for apartment living and homes with sleeping children).
Note: Night mode will be OFF the next time the sound bar is turned on.
Press and hold the INPUT button on the remote for 10 seconds to enable/disable AUX VA. –or–
Press and hold the Bluetooth button on the remote for 10 seconds to enable/disable Voice Assistant Bluetooth (BT). Refer to Connecting to a Voice Assistant on page 15 for more information.

Dolby Audio, Dolby Atmos, or DTS audio format is detected.

Dolby Audio: white LED DTS Audio: amber LED Dolby Atmos: green LED

ENG – 10

Dolby Audio and DTS are available on the HDMI eARC, HDMI In, and Digital Optical inputs. Dolby Atmos is available on HDMI eARC and HDMI In when connected to supported devices and streaming services.
When a Dolby or DTS signal is detected, the LED will light up for 5 seconds before fading away.

There are other functions that are triggered by different button combinations on the sound bar.

Using Button Combinations
Buttons are located here.

Function
Factory Reset

LED Behavior

Description

All LEDs will flash 3 times

Reset the sound bar to the factory default settings. To perform a Factory Reset, Press and hold the Bluetooth ( ) and Volume Down (–) buttons for 5 seconds.
Note: This will erase all settings and preferences that you have set.

VIZIO TV Remote Control

Enabled Disabled

Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the sound bar. To enable/disable this function, Press and hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds.

Eco Power Mode Speaker Test

Enabled Disabled
—

When the Eco Power Mode setting is enabled, the sound bar will automatically power down after a period of inactivity. When disabled, the sound bar will remain powered on until you turn it off. To enable/disable this function, Press and hold the Power ( ) and Volume Down (–) buttons for 5 seconds.
Note: Eco Power mode is disabled by default.
Press and Hold the Bluetooth( ) and Volume Up (+) buttons for 5 seconds. A voice will begin calling out each speaker beginning with left (left, right, and subwoofer-white noise). If any of these are missing, check the connection and run the speaker test function again.
ENG – 11

Programming the Sound Bar
You can program your sound bar to accept TV remote IR commands.

Function

LED Behavior

Description

Learn Volume Down

Waiting to learn: Flash from left to right and back continuously.

Press the OK

and Volume Down

buttons at the same time to put the sound

bar into learning mode. While the sound bar is in learning mode, press the Volume Down

button on the TV remote control.

Learn Volume Up Learn Mute

Learning confirmed: All of the LEDs will blink
twice.

Press the OK

and Volume Up

buttons at the same time to put the sound bar

into learning mode. While the sound bar is in learning mode, press the Volume Up button

on the TV remote control.

Press the OK

and Volume Mute

buttons at the same time to put the sound

bar into learning mode. While the sound bar is in learning mode, press the Mute button on

the TV remote control.

Point both the sound bar and TV remotes towards the front of the
sound bar when programming.
ENG – 12

Turn off your TV speakers when programming your sound bar.

Bluetooth Pairing
To pair the sound bar with a Bluetooth device: 1. Press and hold the Bluetooth button on the sound bar or remote for five (5) seconds.
2. Search for the sound bar (VIZIO M213ad) using your Bluetooth device. For more information, refer to the user documentation that came with the device.
3. Now you can play audio from your Bluetooth device. Volume can be controlled on both your source device and the sound bar.

Bluetooth Device

Button Located on the Side of Sound Bar

In Bluetooth pairing mode, the LED indicators on the display panel on the front of the sound bar will light up from left to right continuously. Once the device is paired, the LED indicators will stop flashing.

ENG – 13

Using Bluetooth Mode

1. Your sound bar supports music streaming from devices with Bluetooth capability.
(Device compatibility will vary, see your device’s documentation for more information.)
2. Once you have paired your source device to the sound bar your device should remain paired. (within range)
3. If the source is changed back to Bluetooth, any paired Bluetooth device will reconnect automatically.
4. If the input is changed, the Bluetooth device will disconnect (will stay connected if Auto VA BT is on).
Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal: · If you hear any break-up or disconnect while streaming music from your device, move the source device closer
to the sound bar.
· Be sure that there are no solid obstructions in the line-of-sight between the sound bar and the source device.
· Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range.

ENG – 14

Your sound bar is not equipped with a microphone, so it cannot operate as a hands-free device for a smartphone.

Reduce the volume levels on your device and on the sound bar before pressing Play. High volume levels can damage your hearing.

Connecting to a Voice Assistant
Your sound bar can connect to a Voice Assistant (VA) device through an AUX VA or Bluetooth connection. Once connected, your sound bar will now act as the VA speaker.
Features and Benefits: · Voice Assistant Dedicated Input: VA can be active on the sound bar even if the sound bar is set to a different
input with audio playing. · Auto Muting: If playing audio from the sound bar, the VA will play over the original source audio for 10
seconds. If continued after the 10 seconds, the VA audio will mute the original source audio. Once the VA audio is stopped the original source audio will resume.
Make sure your sound bar is turned ON and Eco Power setting is turned OFF. Refer to Eco Power mode on page 11 to disable.
Setup Tips: · If the VA audio is too low, adjust the volume from the VA device. · If the start of the response from the VA is cut off, enable “Start of Request” from your VA app settings. · To disable the VA function, press and hold the INPUT button on the remote for 10 seconds to turn on or off.
Refer to Auto VA on page 10 for more information.
ENG – 15

Connecting to a Voice Assistant
Using the AUX VA Port to Connect (If there is no AUX port on the VA device, use a Bluetooth connection instead.) 1. Use a 3.5mm audio cable to connect the AUX VA port on the sound bar to an AUX port on your voice assistant device. 2. Press and hold the INPUT button on the remote for 10 seconds to enable/disable AUX VA mode.

Connect to the AUX VA port only

OR

3.5mm Audio Cable

Only one VA mode (AUX or Bluetooth) can be enabled at a time.

Using Bluetooth to Connect

1. Press and hold the Bluetooth button on the sound bar or remote for three (3) seconds. Search for the sound bar (VIZIO M213ad) using your VA device app. For more information, refer to the user documentation that came with the device.

2. After successful pairing, press and hold the Bluetooth Bluetooth VA mode.
ENG – 16

button on the remote for 10 seconds to enable/disable

Advanced Setup

Digital Optical Cable

3.5mm to RCA Cable

HDMI Cable

USB Thumb Drive*

Tablet/MP3 Player/Laptop *Supports .WAV and .MP3 file format playback only.

Media Player

Game Console

ENG – 17

Connecting with HDMI ARC
HDMI (ARC/eARC) port on your TV*

HDMI (eARC)

ENG – 18

HDMI ARC port location may differ by TV manufacturer. See your TV’s user manual for more information.

Connecting with HDMI ARC

What is HDMI Audio Return Channel (ARC)? · Using HDMI ARC, your TV can send audio to the sound bar using an HDMI cable. · Connect your sound bar to your TV’s HDMI ARC port using an HDMI cable that is ARC compatible.
To connect using HDMI*: 1. Connect one end of the HDMI cable to the HDMI 1 (ARC) port on the back of your TV. 2. Connect the other end to the HDMI (eARC) port on your sound bar. 3. From the AUDIO menu on your TV, change the Digital Audio setting to Dolby Digital or Digital. 4. From the SYSTEM menu, enable CEC and ARC/eARC (SAC) functions. 5. From the CEC menu, select Device Discovery to register the sound bar with the TV.

If you want to use the TV remote to control the sound bar volume: Enable System Audio Control from the CEC menu.

The following steps are for use with a VIZIO TV, steps may differ by TV manufacturer. See your TV’s user manual for more information. CEC Function naming may differ by TV manufacturer. See your TV’s user manual for more information.

ENG – 19

Wall-mounting

1

Place the included wall mounting template against the wall under your TV. Mark the two bracket holes using a pencil.

WALL MOUNTING TEMPLATE
LEAVE THIS SPACE BETWEEN THE SOUND BAR AND YOUR TV

*Bracket Screw NOT INCLUDED WITH SOUND BAR

72-M21DH8-WALB1

Refer to the “Wall-mounting” section in the User Manual for additional information.

2

Install the wall mount brackets to the wall. Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls).

Screws for attaching the bracket to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer.

Bracket Screw* (Not included with sound bar)
Suggested screw size: 3.5 mm diameter, 1.63″ minimum length

ENG – 20

Do not use any of the included screws for the wall mount installation. These are not intended for mounting.

Wall-mounting

3

Wall-Mount Slots

Bottom of Sound Bar Note: When wall mounting the sound bar, these arrows should point upwards.
Hang the sound bar on the wall mount backets then slide down to lock in place.

ENG – 21

Product Registration and Support
Get helpful tips and register your sound bar.
Scan with your phone camera or QR reader.
Customized Support Get assistance quickly with your information on hand.
News and Offers Take advantage of the latest news and special offers from VIZIO.
Updates and Enhancements Stay up-to-date with important product updates and notifications.
More questions? Find answers at:
SUPPORT.VIZIO.COM
ENG – 22

Help & Troubleshooting

There is no power.

· Press the POWER button on the remote control or on the side of your sound bar. · Ensure the power cord is securely connected. · Plug a different device into the electrical outlet to verify that the outlet is working correctly.

There is no sound.

· Increase the volume. Press VOLUME UP on the remote control or on the side of your sound bar.
· Press MUTE on the remote to ensure the sound bar is not muted.
· Press INPUT on the remote or on the side of your sound bar to select a different input source.
· When using either of the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or (B) connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.
· On digital inputs, there will be a voice announcement if an unsupported format is present. Set the source to output PCM.
· Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.
· If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

I hear buzzing or humming.

· Ensure all cables and wires are securely connected.
· Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device.
· Connect your device to a different input on the sound bar.

The remote isn’t working.

· Replace the remote batteries with new ones. · Point the remote directly at the center of the sound bar when pressing a button. · If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application (e.g., Pandora doesn’t support the BACK button).
ENG – 23

Limited Warranty
UNITED STATES By using this VIZIO product, you accept all VIZIO Terms and Conditions, including all the Terms of Warranty, BINDING ARBITRATION AGREEMENT, and Class Action Waiver. If you do not agree to the terms of this warranty, do not use the VIZIO product and, within thirty (30) days of the date of purchase, return it for a refund to the authorized retailer where you purchased it. You have the right to opt out of the Arbitration Agreement and Class Action Waiver within 60 calendar days of your purchase. Please refer to the full section “Binding Arbitration Agreement; Class Action Waiver” below for more details and instructions for opt-out. Full Terms and Conditions may be viewed at vizio.com/en/terms/terms-of-service.
How Long This Warranty Lasts For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase.
What This Warranty Covers VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and manuals. Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico). The product must also be located in the country where it was purchased at the time of warranty service.
How to Get Service Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Customer Support by going to support.vizio.com and selecting Contact Us. You can also call Customer Support (US): 855-209-4106.
Your Obligations Before Service You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period. When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center. ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer.
VIZIO’s Responsibilities If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period. Replacement parts may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer.
ENG – 24

Limited Warranty
Types of Service Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer.
What This Warranty Does Not Cover This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
What to Do If You Are Not Satisfied With Service If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator.
Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only) UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER- RELATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply. The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys’ fees as the arbitrator may determine. The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award pUnitive or other damages not measured by the prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY
ENG – 25

Limited Warranty
OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY. NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.
Opt-Out Instructions IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notification must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver. In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.
Exclusions and Limitations TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
How the Law Applies This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law.
General No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will be severed from this warranty and all other terms will remain in effect. If the class action waiver is found to be unenforceable, then the entire section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the maximum extent not prohibited by law.
Changes to Warranty This warranty may change without notice, but any change will not affect your original warranty. Check www.vizio.com for the most current version.
ENG – 26

Legal & Compliance
FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: 1. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such
interference. FCC RF Radiation Exposure Statement 1. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 3. FCC RF Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Battery Disposal and Recycling You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/ or a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit vizio.com/environment or call 800-374-3473.. Software Licenses All software is provided subject to software license agreements and you agree that you will be bound by such license agreements in addition to other applicable terms of use. By using the VIZIO products, you agree to the VIZIO Terms of Service and Privacy Policy. The VIZIO Terms of Use and Privacy Policy may be updated from time to time and are available to view at vizio.com/terms and vizio.com/privacy, respectively. Export Regulations Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received. © 2022 VIZIO, Inc. All Rights Reserved. This User Manual may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy of the information provided herein. All product specifications, functionality, features, configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors. To review the most updated version of this User Manual and the associated Quick Start Setup guide, go to vizio.com. VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.
ENG – 27

Legal & Compliance

Specifications

Sound Bar: One 1.73″ x 2.91″ (44 x 74 mm) Full Range Driver + One 36 mm Tweeter for Each Channel (2 for left, 2 for right) Built-in Subwoover Two 2.79″ x 3.58″ (71 x 91 mm) Drivers

Connections:

One 3.5mm Stereo Audio One Optical (Toslink) HDMI (eARC) HDMI In

Sound Pressure Level* (System): 98 dB Frequency Response (System): 50 Hz – 20 KHz

Voltage: 100-240Vac, 50-60Hz

Compliances: cULus / FCC Class B / CEC

One 3.5mm AUX Voice Assistant Bluetooth One USB (Supports .WAV and .MP3 format only)

*Sound pressure level measured using pink noise at 1 meter, c-weighted.

ENG – 28

Legal & Compliance

®

HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing LLC.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VIZIO Inc. is under license. Other trademarks and trade names are those of their respective owners.
Dolby, Dolby Atmos, and the Double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2021 Dolby Laboratories. All rights reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, DTS:X, Virtual:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.

ENG – 29

ENG – 30