Schl ter Systems BEKOTEC-THERM-EAHB Actuator for Adaptive Hydronic Balancing Instruction Manual
- June 10, 2024
- Schl ter Systems
Table of Contents
Schl ter Systems BEKOTEC-THERM-EAHB Actuator for Adaptive Hydronic
Balancing
Product Information
The product is a heating system component that includes a Stellantrieb (actuator), temperature sensor clips, and LED code. It is designed for attachment to heating circuit distributors with a heating circuit spacing of at least 50 mm and to thermostat valve inserts of well-known manufacturers with M30 x 1.5 external threading (closed height 11.8 mm). The temperature sensors provided are suitable for surface heating pipes made of plastic, metal or combinations thereof, with outside diameters of 10 to 20 mm.
Product Usage Instructions
- Fully open any existing flow meters or balancing valves of all heating circuits.
- Screw on the actuator onto the heating circuit distributor or thermostat valve insert.
- Attach the temperature sensor clips onto the surface of the heating pipes.
- Connect the product to a room thermostat or voltage source using appropriate wiring.
- Once installation is complete, turn on the power to start the system.
- The LED code will provide information on the status of the system.
Installation instructions for qualified professionals
www.bekotec-therm.com
Actuator for adaptive hydronic balancing
Installation instructions
- Fully open any existing flow meters or balancing valves of all heating circuits.
- Open the folding lever.
- Screw on the actuator
- Close the folding lever
- Attach the temperature sensor clips.
- Connect to room thermostat/voltage source.
- Start.
Caution: The device must be installed by a qualified electrician. All applicable safety regulations have to be observed.
For attachment to heating circuit distributors with a heating circuit spacing of at least 50 mm and to thermostat valve inserts of well-known manufacturers with M30 x 1.5 external threading (closed height 11.8 mm). Temperature sensors suitable for surface heating pipes made of plastic, metal or combinations thereof, with outside diameters of 10 to 20 mm.
- Operating voltage: 230 V AC, 50 Hz
- Switch-on current: 130 mA for max. 200 ms
- Power rating: 1.7 W
- Protection class: II
- IP protection class: 54
- Ambient temperature: 0 – 50 °C
- Installation position: any
Tel.: +49 2371 971-0
Fax: +49 2371 971-1111
info@schlueter.de
www.bekotec-therm.de
References
- Schlüter®-BEKOTEC-THERM: Underfloor Heating System | Schlüter-Systems
- Fußbodenheizungen von Schlüter-Systems: Wohlfühl-Klima mit System | Schlüter-Systems