metabo LB 18 LTX BL Cordless Blower User Manual

metabo LB 18 LTX BL Cordless Blower

Product Information: LB 18 LTX BL Cordless Leaf Blower

The LB 18 LTX BL is a cordless leaf blower designed to provide efficient and easy cleaning of outdoor spaces. It comes equipped with a powerful brushless motor and is compatible with 2.0 Ah, 4.0 Ah, 5.2 Ah, 5.5 Ah, and 8.0 Ah Li- Power and Li-HD batteries.

The leaf blower also comes with LED lights that indicate the battery level and can be adjusted to regulate the air flow speed. It has a maximum air speed of 150 km/h (94 mph) and weighs 3 kg (6.6 lbs) with the smallest battery pack.

Product Usage Instructions

1. Read the user manual carefully before using the leaf blower.
2. Charge the compatible battery pack fully before using it with the leaf blower.
3. Attach the blower nozzle to the leaf blower securely.
4. Switch on the leaf blower only when the blower nozzle is attached.
5. Guide the leaf blower in a sweeping motion over the outdoor space to clear leaves and debris. Adjust the air flow speed as required.
6. Switch off the leaf blower after use.
7. Clean the leaf blower and store it in a safe and dry place.
8. Refer to the user manual for maintenance and repair instructions.

Caution: Wear suitable hearing protection while using the leaf blower to avoid hearing damage. Prolonged use of the machine or improper guidance and maintenance may cause health issues due to vibration emissions. Do not expose the battery pack to fire.

For more information and technical specifications related to the LB 18 LTX BL cordless leaf blower, refer to the user manual or visit the manufacturer’s website at www.metabo.com.

| LB 18 LTX BL
---|---
*1) Serial Number| 01607..
U| V| 18
n 0| min -1 (rpm)| 0-20300
V air| m 3 /h (cfm)| 0 – 650 (0 – 383)
v air,max| km/h (mph)| 150 (94)
m| kg (lbs)| 2,5 (5,5)
a h/Kh| m/s 2| < 2,5 / 1,5
L pA /K pA| dB(A)| 68 / 3
L WA /K WA| dB(A)| 89 / 1,5
L WA(G) /K WA(G) *5)| dB(A)| 89 / 1,5

Declaration of Conformity

We declare under our sole responsibility: These cordless leaf blowers, identified by type and serial number 1), comply with all relevant requirements of the directives 2) and standards 3). Technical file at 4) –
2000/14/EC: Conformity assessment procedures in accordance with Annex V. Guaranteed acoustic power level 5).
For UK only:
We as manufacturer and authorized person to compile the technical file, see 4) on page 3, hereby declare under sole responsibility that these cordless leaf blowers, identified by type and serial number 1) on page 3, fulfil all relevant provisions of following UK Regulations S.I. 2016/1091, S.I. 2008/ 1597, S.I. 2012/3032, S.I.2001/1701 and Designated Standards 3)
S.I. 2001/1701: Conformity assessment procedures in accordance with Schedule 8. Guaranteed sound power level *5).

Specified Conditions of Use

The cordless leaf blowers are designed to blow away and collect leaves, grass, dirt and other debris / similar materials on lawns, pavements or asphalt roads.
The user bears sole responsibility for any damage caused by inappropriate use.
Generally accepted accident prevention regulations and the safety instructions must be observed.

General Safety Information

For your own protection and for the protection of your power tool, pay attention to all parts of the text that are marked with this symbol!

WARNING – Read the operating instructions to reduce the risk of injury.

WARNING – Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Keep all safety instructions and information for future reference. Always include these documents when passing on your power tool.
Residual risks: Even when the device is used as intended, there could be residual risks. Observe all safety warnings and instructions.
Possible hazards:

• Injuries and material damage caused by flying parts.
• Lung damage if no suitable dust mask is worn.
• Hearing damage if no suitable hearing protection is worn.
• Health detriment, due to vibration emissions, if the machine is used over a long period of time or if it not properly guided and maintained.

Special Safety Instructions

Operating instructions

• Carefully read the operating instructions. Familiarize yourself with the controls and the proper use of the machine.
• Do not allow children, persons with reduced physical, sensory or mental abilities or lack of experience and/or knowledge, or persons not familiar with these instructions to use this machine. Local regulations may limit the age of the operator.
• Children should be supervised to ensure that they do not play with the tool.
• The user is responsible for injuries or material damage to other persons or their property.

Preparation

• Always wear safety glasses and hearing protection when operating the machine.
• Wear a suitable dust protection mask.
• Always wear sturdy shoes and long trousers when operating the machine. Do not operate the machine barefoot or with open shoes. Do not wear loose-fitting clothing or clothing with dangling strings or ribbons.
• Do not wear loose-fitting clothing or jewellery that could get sucked into the suction port. Keep long hair away from the suction port.
• Operate the machine in a recommended position and only on firm, level ground.
• Do not operate the machine on paved or gravelled surfaces where ejected material could cause injury.
• Before use, check that the machine and battery pack are undamaged and assembled correctly. Have defective parts repaired. Replace damaged or illegible markings.
• Do not operate the machine if persons, especially children, or pets are nearby.

Operation

• Use the machine only in daylight or good artificial light.
• Never direct the air jet at yourself or other people. Objects can fly around at high speed and cause personal injury and material damage.
• Keep hands, other body parts or clothing away from the suction port and exhaust opening and do not bring them near moving parts.
• Avoid adverse body positions. Keep proper footing and balance at all times, especially when working on sloped ground. Always work while standing on the ground, never on a higher level.
• If the machine starts making unusual noises or vibrates unusually strong: Switch off the machine immediately and wait until the motor has come to a standstill. Remove battery pack. Take the following steps before restarting and operating the machine:
  • check for damage;
  • replace or repair damaged parts;
  • check for loose parts and tighten them.
• If the suction port is clogged and must be cleaned: Switch off the machine and remove the battery pack
• Never operate the machine with damaged protective equipment or without protective equipment.
• Keep the battery pack clean to prevent damage or possible fire.
• Switch off the machine and remove battery pack. Ensure that all moving parts have come to a standstill:
  • if you leave the machine unattended;
  • before clearing any blockages;
  • before checking or cleaning the machine or before carrying out any work on the machine;

Maintenance and storage

• Remove the battery pack from the machine, wait until all moving parts have come to a standstill and the machine has cooled down before making any adjustments, retrofitting, maintenance, cleaning or before storing the machine.
• Maintain the machine with care and keep it clean.
• Store the machine in a dry place out of the reach of children.
• Replace worn or damaged parts for safety reasons. Use only original spare parts and accessories.

Use and handling cordless tools

• Only recharge with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

• When not in use, keep batteries away from paper clips, coins, keys, nails, screws or other small metal objects that could bridge the contacts. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery. Avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or  temperature above 130 °C (265 °F) may cause explosion.

• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

• Avoid accidental operation. Make sure that the machine is switched off before connecting the battery and before picking up or carrying the lamp. Carrying the machine with your finger on the switch or energising machines that have the switch on invites accidents.

• Remove the battery pack from the tool…

  • before making any adjustments, changing tools, maintenance or cleaning.
  • if the operator moves away from the tool.
  • prior to the removal of blockages.
  • after touching a foreign body in order to check the tool for damage.
  • For immediate checking, when the machine starts to vibrate excessively.
    Protect battery packs from water and moisture!
    Do not expose battery packs to fire!

• Do not use faulty or deformed battery packs!

• Do not open battery packs!

• Do not touch or short circuit battery pack contacts!

A slightly acidic, flammable fluid may leak from defective Li-ion battery packs!
If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately!

• If the machine is defective, remove the battery pack from the machine.

Transport of li-ion battery packs:

• The shipping of li-ion battery pack is subject to laws related to the carriage of hazardous goods (UN 3480 and UN 3481). Inform yourself of the currently valid specifications when shipping li-ion battery packs. If necessary, consult your freight forwarder. Certified packaging is available from Metabo.
• Only send the battery pack if the housing is intact and no fluid is leaking. Remove the battery pack from the machine for sending. Prevent the contacts from short-circuiting (e.g. by protecting them with adhesive tape).

Icons
WARNING – General hazards!

• Read the operating instructions.

• Protect the device from water and moisture. Do not expose to rain.

• WARNING – Always wear protective goggles.

• Ensure that nobody gets injured by catapulted foreign bodies. Keep other people away.

• Keep persons nearby and pets at a safe distance to the device. Keep other people away.

• Keep hair, loose clothing, fingers and other body parts away from suction port and blow opening. They can get caught and sucked in.
  Use a hair net for long hair.

• Always keep suction port and exhaust port free, do not cover, block or do not put anything inside.

Additional Safety Instructions

• Do not blow onto objects that are flammable, burning, smoking or glowing, such as cigarettes, matches, hot ash etc.
• Do not modify the device.
• Do not use the blower to pump up balls, rubber dinghies or similar.
• Do not use as vacuum cleaner.
• Do not vacuum any liquids.
• Do not operate the machine in bad weather conditions, especially if there is a risk of lightning.
• In the event of an accident or malfunction, switch off the machine immediately and remove the battery pack.

Overview

1. Blowpipe
2. Speed switch (for adjusting the air speed, infinitely adjustable with locking lever)
3. Locking lever (for continuous operation at the selected air speed)
4. Handle
5. Battery pack release button
6. Battery pack *
7. Capacity and signal indicator *
8. Capacity indicator button *
9. Suction port
10. Eyelet for securing the carry strap (can also be screwed in on the opposite side) 11 Shoulder carry strap
11. Exhaust port

• depending on equipment/not in scope of delivery

Initial Operation

Attach the blowpipe
Prior to any conversion work: remove battery pack from machine.
Push the blowpipe (1) onto the exhaust port (12) in such a way that the lug engages.

Battery pack
Charge the battery pack (6) before use. Recharge the battery pack if performance diminishes.
Instructions on charging the battery pack can be found in the operating instructions of the Metabo charger.
In case of Li-Ion battery packs with capacity and signal display (7) (equipment-specific):

• Press the button (8), the LEDs indicate the charge level.
• The battery pack is almost flat and must be recharged if one LED is flashing.

Removing and inserting the battery pack
Remove: Press the battery pack release button (5) and remove battery pack (6).
To insert: Slide the battery pack (6) in until it engages.

Use

Switching on/off, setting the air volume
Only switch on when the blowpipe (1) is attached.
Avoid switching on the machine accidentally: always switch it off when the battery pack is removed from the machine.

Switching on, setting air volume:
Press the speed switch (2) . Change the air speed by depressing the switch.
Turn the locking lever (3) for continuous mode.
Switching off:

• Turn the locking lever (3) upwards.
• Release the speed switch (2) .

Working
Wear the machine with the carry strap (11) on your shoulder (ideal for balancing and continuous operation) and guide the machine by the handle (4).
Avoid adverse body positions. Keep proper footing and balance at all times, especially when working on sloped ground.
Do not operate the machine on paved or gravelled surfaces where ejected material could cause injury.
Direct the blowpipe (1) to the ground. Never direct the air jet at yourself or other people.
Adjust the air speed to the application.
Walk slowly, do not run.

Cleaning, Maintenance

Before each use, check that all moving parts are functioning correctly and do not seize, make sure that no parts are broken or damaged to an extent where they affect the function of the machine. Have damaged parts repaired before using the machine.
Remove the battery pack periodically and wipe the contact area of the battery pack and machine with a dry cloth and remove dust.
Never service damaged battery packs. Any service of battery packs should only be performed by the manufacturer or authorized service providers.

Storage

Allow to cool before storage. Remove the battery pack from the machine for storage. Store in a dry place out of the reach of children.

Accessories

Use only original Metabo or CAS (Cordless Alliance System) battery packs and accessories.
Use only accessories that fulfil the requirements and specifications listed in these operating instructions.

• A Battery packs with different capacities. Buy battery packs only with voltage suitable for your power tool.
  Order no.: 625367000 4.0 Ah (LiHD)
  Order no.: 625368000 5.5 Ah (LiHD)
  Order no.: 625369000 8.0 Ah (LiHD) etc.
  Order no.: 625596000 2.0 Ah (Li-Ion)
  Order no.: 625591000 4.0 Ah (Li-Ion)
  Order no.: 625592000 5.2 Ah (Li-Ion) etc.

• B Chargers: ASC 55, ASC 145, etc.

For a complete range of accessories, see www.metabo.com or the catalogue.

Repairs

Repairs to electrical tools must only be carried out by qualified electricians and only with original spare parts!
Contact your local Metabo representative if you have Metabo power tools requiring repairs. For addresses see www.metabo.com.
You can download a list of spare parts from www.metabo.com.

Environmental Protection

Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.
Packaging materials must be disposed of according to their labelling in accordance with municipal guidelines. Further information can be found at www.metabo.com in the “Service” section.
Battery packs may not be disposed of with regular waste. Return faulty or used battery packs to your Metabo dealer!
Do not allow battery packs to come into contact with water!
Only for EU countries: never dispose of power tools in your household waste! According to European Directive 2012/19/EU on Waste from Electric and Electronic Equipment and implementation in national law, used power tools must be collected separately and recycled in an environmentally-friendly manner.
Discharge the battery pack in the power tool before disposal. Prevent the contacts from short-circuiting (e.g. by protecting them with adhesive tape).

Technical Specifications

Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical progress.

• U =Battery pack voltage
• n0 =Idle speed
• Vair =Air speed
• vair,max =Max. air speed
• m =Weight with smallest battery pack

Permitted ambient temperature during operation: -20 °C to 50 °C (limited performance with temperatures below 0 °C). Permitted ambient temperature for storage: 0 °C to 30 °C direct current The technical specifications quoted are subject to tolerances (in compliance with relevant valid standards).

Emission values
These values make it possible to assess the emissions from the power tool and to compare different power tools. The actual load may be higher or lower depending on operating conditions, the condition of the power tool or the accessories used. Please allow for breaks and periods when the load is lower for assessment purposes. Arrange protective measures for the user, such as organisational measures based on the adjusted estimates.
Vibration total value (vector sum of three directions) determined in accordance with EN 50636-2-100:

Vibration total value (vector sum of three directions) determined in accordance with EN 50636-2-100:

• ah = vibration emission value
• Kh = uncertainty (vibration)
• Typical A-weighted sound levels:
• Lpa = Sound-pressure level
• LWA = Acoustic power level
• KpA, KWA/WA(G= Uncertainty
• LWA(G) = Guaranteed acoustic power level as per 2000/14/EC
• During operation the noise level can exceed 80 dB(A).
• Wear ear protectors!

Measured values determined in conformity with EN 50636-2-100.

Metabowerke GmbH
Metabo-Allee 1
72622 Nuertingen

Germany
www.metabo.com

References

• Metabo - Power Tools for professional users

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>