Timberk T-HG4EN57 Built In Gas Hob Instruction Manual

: June 10, 2024
: TIMBERK

Timberk T-HG4EN57 Built In Gas Hob

Built-in Gas Hob

Product Information

Models : T-HG4EN57, T-HG4SS56
Input rating : 220-240~, 50Hz
Gas types : NG G-20, LPG G-30
Dimensions : 595x520x102 mm
Weight : 6.5 kg
Number of burners : 4

Usage Instructions

Read the instruction manual carefully before using the gas hob.
Ensure the gas hob is installed by a qualified technician.
Check that all burners are off before connecting the gas supply.
Turn on the gas supply and check for leaks using a soap solution. If any leaks are detected, turn off the gas supply immediately and call a technician.
To use the gas hob, turn the control knob to the desired position and ignite the burner with a lighter or match.
Cook your food on the burner and adjust the flame as necessary using the control knob.
When you are finished cooking, turn off the burner and allow it to cool before cleaning.
Clean the gas hob regularly with a damp cloth and mild detergent, and do not use abrasive cleaners or materials.

Dear customer! We thank you for your wise choice and for a purchase of this gas hob. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

PRECAUTIONS

ATTENTION
The following usage instructions should be followed. When using a gas hob, a number of precautions must be observed. Improper operation due to ignoring precautions can lead to harm to the health of the user and other people, as well as damage to their property.

Please check is your appliance has been damaged during the transportation.
The setup of the appliance should be done by a qualified technician and in accordance with the regulations.
This appliance should only be used for domestic usage purposes – cooking and reheating the food.
The manufacturer and the seller do not accept any liability for faulty installation, faulty tightening usage out of purpose and ones that are specifically stated.
The appropriate voltage for your appliance is 220-240V, 50-60 Hz. If the power of your energy supply is lower than 16A, please have a qualified technician to set up a supply higher than 16A.
Since the plug of your appliance is grounded, make sure that you use grounding socket. Our company is not responsible for any damage arising out of usage the device without grounding system.
When connecting the gas hob, the control knobs must be in the upper position (gas supply is blocked).
When the power cord is damaged, contact our service as soon as possible and make it replaced.
NOTE: Particular attention should be paid to the ventilation requirements: do not clutter up the natural ventilation openings or install a mechanical ventilation device (hood). With prolonged or intensive use of the device, additional or more intensive ventilation may be necessary: open the window or increase the power of the mechanical hood.
Since they are potentially dangerous, keep all the package materials (plastic, nylon or polystyrene and etc.) away from kids and/or disabled people. Do not place anything near the device within 50 cm. The device should not be covered up; otherwise it might heat up excessively and cause a fire.
Install the appliance near electrical and gas connections. The device will be connected simultaneously to electrical and gas connections.
Connect your gas to your cooktop in the shortest way and without leakages. For your safety, the hose you use should not be longer than 1.25 meters. Only use plastic hoses. Vinyl plastic might be dangerous. Do not place the hose near the hot parts of the gas cooktop.
Insert the plastic hose into the hose inlet tightly and stabilize it with a hose clip.
This appliance cannot be operated by children; it can only be used by adults. Make sure that children do not touch the buttons and play with the appliance.
Never use inflammable materials such as gasoline to clean your appliance. Do not use the appliance in kitchens where inflammable materials are used.
Keep your appliance away from curtains, textiles and other inflammable materials around.
Do not let water and any liquids leak into the appliance.
Do not let any object enter into the appliance.
Do not touch the gas nozzles, the grill and the top surface of the appliance right after you use your appliance. Otherwise, you can burn your hands. Children and patients should be kept away from the electric parts and the hot surfaces.
Check if the voltage stated on the label on the appliance corresponds to the voltage at your home.
Make sure that the power cord does not touch sharp edges and hot surfaces.
It is dangerous to modify or attempt to modify the appliance. Do not attempt to repair the appliance in case of failure.
Make sure that the indicator on the button is in “0” or “o_” position after you use it. Turn off the main gas outlet or the cylinder gas outlet.
If you decide not to use the appliance anymore, please make the parts which may harm kids harmless and make the device unusable in accordance with the local laws on health and security.
In case of a gas leakage, close the bottled gas hood, open the windows and ventilate the room and contact your technical service immediately.
NOTE : When checking for gas leaks, never use lighters, matches, cigarette flames or similar flames.
Gas taps are secure and locked. Do not try to turn it before pushing the button.
The valve of the appliance has a security lock. Fire should be hold for 3-5 seconds. If the gas nozzles do not catch fire or fire glowing from the nozzles goes out, close the button and do not try to fire it again in one minute. If this continues after 3-4 times you try, call the nearest authorized technical service.
The data plate which includes technical information is placed at a visible point under the safety cap and it is also added to this manual. The data plate under the safety cap should not be removed in any case. The illustrations regarding the usage of this appliance are grouped together at the end of this manual.
TRANSPORTATION : Keep the original box of your appliance in order to use during transportation. Use a duct tape to stabilize the gas nozzles and the nozzle caps. Before transportation, put a cardboard between the upper cover and the grill.
Please follow the recommendations below to use the product you purchased efficiently in terms of energy consumption and energy savings in the country.
While cooking on the cooktop, close the cap of the pot properly. The fire should touch the bottom surface of the pot and should not exceed the limits of the surface.
Pots and pans should be closed with their original caps. When there is not a cap, the heat and water is wasted and the food is cooked in a longer time and the energy is wasted.
Do not boil water more than you need.
Use pans and pots with flat bottoms. Make sure that the size of the pan and the burner are proportional in terms of the diameter of the burner. If the electric cooktop is only at the high level at the first moments of cooking, it will be more economical. Foods will continue to be cooked on low heat by boiling. Turn off the burner a specified period of time before cooking is completed. Thus, you will use the remaining heat of the burner.

DESIGNATION

The gas hob is designed for cooking and heating food in domestic conditions. It is connected to the gas pipeline and the electrical network. It is built into the countertop as an independent cooking surface.

SPECIFICATIONS

Technical parameters
Technical parameters are shown in table 1

Article| Unit of

measurement

| T-HG4EN57| T-HG4SS56
---|---|---|---
Product category| –| II2H3B/P| II2H3B/P
Surface material| –| Enameled steel| Stainless steel
Grid material| –| Cast iron| Cast iron
Heating zones number| –| 4| 4
Rated voltage| V/Hz| 220-240~/ 50| 220-240~/ 50
Rated power consumption| W| 0,60| 0,60
Protection Class| –| I| I
Total heat power NG G-20| kW| 6,5| 6,5
Upper left burner| kW| 1,73| 1,73
Front left burner| kW| 2,12| 2,12
Upper right burner| kW| 1,73| 1,73
Lower right burner| kW| 0,90| 0,90
NG G-20 pressure| mbar| 20| 20
NG G-20 gas consumption| m3/h| 0,62| 0,62
Total heat power LPG G-30

(Butane)

| kW| 5,8| 5,8
LPG G-30 pressure| mbar| 30| 30
---|---|---|---
LPG G-30 gas consumption| g/h| 423| 423
Gas control| –| yes| yes
Auto ignition| –| yes| yes
Dimensions| mm| 595x520x102| 595x520x102
Built-in dimensions| mm| 560×490| 560×490
Net weight| kg| 6,5| 6,5
Cord length (external)| m| 1| 1
Destination countries| –| RU, KZ, BY| RU, KZ, BY

The device should only be used in the countries of use specified in this instruction manual.

Gas type	G20	G30

Burners

| Nozzle diameter (mm)| Heat power of the burner (kW)| Nozzle diameter (mm)| Heat power of the burner (kW)
Small| 0.8| 0.9| 0.5| 1.01
Medium| 1.05| 1.73| 0.6| 1.47
Large| 1.3| 2.12| 0.8| 1.87

DESCRIPTION OF THE DEVICE

Timberk-T-HG4EN57-Built-In-Gas-Hob-fig-1

Large burner
Medium burner 1
Small burner
Medium burner 2
Grid
Control panel
Lower part of the body
Power cord with plug

The picture is for reference only and may differ from the actual product

DELIVERY SET

Built-in gas hob – 1 pc.
Installation set – 1 pc.
Inlet fitting for liquefied gas – 1 pc.
Nozzles for liquefied gas (G30) – 4 pcs.
Grid – 2 pc.
Instruction manual – 1 pc.
Warranty card – 1 pc.
Packaging – 1 pc.

BEGINNING

UNPACKING THE DEVICE
Remove the packaging and remove the appliance. If you have any doubts, do not use the device and contact the seller.Some parts of the device are protected by a plastic film. This protective film must be removed before using the appliance. Packaging materials should be carefully discarded and not left within reach of children, as they pose a potential danger.

BEFORE CONNECTING THE DEVICE
The gas stove is designed for use on G20 (natural gas) and G30 (butane) gas, burning products contain carbon monoxide. and carbon dioxide, the exhaust of combustion products affects our environment when it reaches a certain amount of CO and CO2. Natural gas injectors (G20) are already pre-installed in the device. If it is necessary to use G30 gas (butane), it is necessary to replace the pre-installed nozzles with special nozzles for liquefied gas (G30), which are included in the delivery package. (see “Installation”, “Gas supply connection”) To ensure the rational use of energy, install the gas stove in accordance with these instructions.

INSTALLATION

INSTALLATION INSTRUCTIONS:
Important!!! These instructions are only for the qualified technicians. The appliance should be installed in accordance with the applicable laws. Before performing any operation on the appliance, unplug the appliance from the mains supply.

Placing on the kitchen counter
This appliance can be placed on any kind of kitchen counter (minimum temperature: 90 0C Degrees) as long as it is resistant to the temperature. The space to be left on the kitchen counter and the minimum lengths for rear and side walls and top of the appliance are shown in the illustrations below.

VENTILATION
The room in which the device is located must have an air supply. The room should have an opening window, some rooms may also require a permanent window.

NOTE : The use of a gas appliance for cooking leads to the release of heat and moisture in the room in which it is installed. Always make sure that the kitchen is well ventilated; keep the natural ventilation openings open or install a hood.

When installing a gas hob above the drawer, appropriate precautions must be taken to prevent contact with the bottom of the appliance, as it can get very hot during operation. The recommended method is to fix an additional wooden bar under the hob at a distance not closer than 10 mm to the base of the hob. Also, this panel should have ventilation as shown in Figure 3.

NOTE: The bar under the hob must be easily removed so that any maintenance can be performed.

If the appliance is installed above the oven, place the hob at least 15 mm above the bar. The electrical connections of the built-in hob and oven must be carried out separately, both for electrical safety purposes and to facilitate disassembly. If there is an oven under the hob, it is recommended to use models of ovens with an internal cooling system.

Fixing the appliance:
Follow the steps below in order to fix the appliance to its place:

Remove the grilles and burners before installation, taking care not to damage the spark plugs and thermocouples.
The dimensions of the built-in area and the recommended margins are shown in Figure 4.
Install the sealing rubber around the perimeter of the cut-out space, so that the ends of the gasket are completely adjacent to each other and do not overlap each other.
Place the hob in the center mounting hole and press it so that the hob fits snugly against the countertop.
Using the mounting kit, secure the hob to the countertop. To do this, the set includes 4 mounting brackets and 4 screws. Refer to Figure 5

NOTE!
Do not place the device near flammable substances, alcohol, benzene, etc. The installation class is type 3 for gas and type 2 for electrical components. The burner units must be designed for temperatures up to 90°C or above.

Installation area and combustion vapor removal:
The device must be installed and operated in the appropriate places and in accordance with applicable law. The installation specialist must comply with applicable laws regarding ventilation and the removal of combustion fumes.

Installation Area:

There should be a space providing sufficient natural ventilation in order to burn the gas properly in the room where the appliance is installed (A) – figure 6.
If the appliance has no safety valve, this space should be adjusted in a way that it cannot be blocked from inside and outside. Ventilation area should be placed on the opposite side of the steam outlet appliances. If it is not possible to provide the necessary space, the air may be provided from the room ventilated well and sufficiently on condition that there is no dangerous area or low pressure area.
This gas operated appliance generates temperature and humidity in the room where the appliance is installed.
Provide well ventilation for the kitchen. Keep natural ventilation spaces open or install a mechanical ventilation device (aspirator or hood with exhaust duct). When the appliance is used for a long time and continuously, additional ventilation might be necessary for example by opening a window or using more efficient ventilation (increasing hood suction speed).
Removing the burning steam: In addition, the burning steam generated by these gas operated appliances should be removed with the help of a direct exhaust duct or a hood having a connection to the outside of the house. If it is not possible to install a hood, an aspirator fan should be installed on the outside wall or window.
In order to guarantee the air volume in the kitchen to be replaced 3-5 times, the aspirator fan should have a sufficient capacity. It is recommended to replace the air volume every 15-20 minutes.
A : Space for air source
C : Hood for removing the burning steam
E : Electrical aspirator fan for removing the burning steam

Gas Supply Connection:
Before installation, make ensure that the type and pressure of the local gas supply comply with the settings of the appliance. For this, check the data plate of the appliance as well as user manual. The gas connection should be performed by a qualified technician in accordance with the local applicable laws. If metal hoses are used, make sure that they do not touch the moving parts and are not bending. Perform the connection on the device without causing any voltage.

NOTE: Do not install the device in direct sunlight and at temperatures above 50 °C. To easily attach the gas hose to the gas inlet, immerse the end of the hose in boiling water for 1 minute before installation. Then tighten the screw with a screwdriver. The hose must be secured to the inlet with a clamp. Check for gas leakage with soap suds.
Do not move the appliance with gas connections installed. The use of force may cause the hose to disconnect. If the type of gas that you will use differs from the one that your gas hob is configured for, it is necessary to replace the gas jets.

The following points must be observed:

Remove the supporting grilles for dishes and remove the burner dividers with caps from the sockets;
Unscrew the jets with a socket wrench and replace them with a suitable diameter. The jets are marked with an indication of the diameter of the hole in millimeters in the upper part of the jet;
Carefully assemble all components of the gas hob in reverse order.
ATTENTION : If the gas pressure is different, it is necessary to install a suitable pressure regulator in accordance with local standards for the use of the gas network.
ATTENTION : The replacement of the jet must be carried out by disconnecting the panel from the mains.

NOTE:

Replacement of jets (injectors) should be entrusted to gas service specialists who have the necessary knowledge and qualifications and will be able to correctly adjust the gas supply when switching to another fuel. It is not recommended to translate the gas stove yourself.
Before connecting, check whether the connection conditions (gas type and gas pressure) correspond to the device setting
The appliance should not be connected to the chimney

ATTENTION! WHEN CONNECTING THE DEVICE TO THE GAS NETWORK WITH A FLEXIBLE CONDUCTIVE HOSE (STEEL OR IN A STEEL BRAID, ETC.), A SPECIAL INSULATING INSERT SHOULD BE USED. THE INSERT IS INSTALLED ON THE INDOOR GAS PIPELINE AFTER THE CRANE.
WHEN CONNECTING THE DEVICE TO THE GAS NETWORK WITH A FLEXIBLE NON-CONDUCTIVE HOSE (RUBBER) THE USE OF A SPECIAL INSULATING INSERT IS NOT REQUIRED. A flexible connection hose, a special insulating insert and a gas pressure regulator are not included in the delivery package and are purchased separately. The characteristics of the flexible connection hose must comply with the legislation in force in your region. The selected hose must have a document indicating the date of manufacture, service life and replacement.

When connecting, the following requirements must be met:

The hose must be accessible for inspection along its entire length.
The hose must not pass in a high temperature zone and touch the protective casing.
The hose should not be squeezed, form loops, have strong bends and experience tensile forces.
The hose must not touch moving objects and objects with sharp edges.
The hose must have a length sufficient for connection, maintenance and comply with the applicable TNPA in your region.
If the hose is damaged, it must be replaced entirely, repair is unacceptable.

Power connection:
Before connecting the appliance to mains supply, check if the voltage corresponds to the values written in the data plate. If the appliance is directly connected to the mains, place an all-pole fork spanner having 3mm contact gap and complying with the regulations. Since it may cause excessive temperature and burns, do not use a reducer, adaptor or limit switch for connection to mains supply. The appliance should be grounded in accordance with the regulations. The manufacturer does not accept any liability arising out of not observing this regulation. If the power cable is to be replaced again, use a cable which is equivalent to the original cable provided by the manufacturer and suitable to load and temperature. This cable can be provided from the Authorized Services. It is obligatory the end of the cable to be connected to the same appliance to have a Yellow-Green grounding conductor which is a little bit longer than the other conductor.

Gas connection and safety

For LPG (bottled gas) connection, attach the metal clamp to the hose coming from the LPG bottle. By heating it up with boiled water, place the one end of the hose to hose inlet coupling at the back of the appliance by pushing it till the end. Then, take the clamp to the end of the hose and tighten it with a screwdriver. The necessary gasket and hose inlet coupling for the connection are shown in the figure 8.
NOTE : The regulator to be connected to the LPG bottle should be 300 mm.
The natural gas connection should be performed by an authorized technician. For the natural gas connection, insert the gasket into the nut at the end of the natural gas connection hose. Turn the nut in order to attach the hose to the main gas pipe. Check if there are any leakages and then complete the connection.
WARNING!
The gas hose and the power cable of the appliance should not be near hot places such as the backside of the appliance. The gas hose should be connected by making wide angled turns against bending possibility. (see fig. 7)
WARNING!
Moving an appliance of which gas connection was performed might cause gas leakages.
Connect your cooktop to the main gas tap in the shortest way and without leakage possibility. For your safety, the hose to be used should be 40 cm minimum and 125 cm maximum.
When checking if there is any gas leakage, do not use lighter, match, glowing cigarette or similar flammable materials.
Apply soap foam to the connection point. If there is a leakage, soap foam would react in these parts.

OPERATION

Normal Burner Left Front
High Heat Burner Left Back
Normal Burner Right Back
Auxiliary Burner Right Front

Using control panel
Distributing the gas to the nozzles is controlled by the buttons shown in the figures 9, 10, which also control the taps. Based on the models, the symbols are printed on the buttons and control panels. The below mentioned adjustments can be done by moving the indicator so as to correspond to the printed symbols.

The burner is off
Auto ignition
Maximum flame position
Minimum flame position
The burner

The large flame symbol ( ) indicates the highest cooking power, and the small flame symbol ( ) indicates the lowest cooking power. In the closed position ( ), the gas on the burners is turned off.

Using Cooktop

Cooking with Gas
The size of the pot and the gas fire should be proportional. Adjust the gas fire so that it will not be seen outside of the pot and put the pot in the middle of the burner (see fig. 11)

Timberk-T-HG4EN57-Built-In-Gas-Hob-fig-14

Using Burners

Timberk-T-HG4EN57-Built-In-Gas-Hob-fig-15

Burner	Pan diameter
1	Normal burner 1
2	Normal burner 2
3	Auxiliary burner
4	Strong burner

Firing up the gas-operated burners

Hold down the button of the burner.
Turn it to the anti-clockwise and bring it to the big fire symbol. With the spark, the burner will catch fire.
Adjust it in the way you want.

NOTE: When igniting the burner, there should be no extraneous sounds in the form of pops. The flame should burn evenly, its tongues should be bluish- white. If yellowish impurities are observed during the combustion of the air- gas mixture, and the flames acquire a red hue, then this clearly indicates the incorrect operation of the jets.

Turning the gas-operated burners off
Turn the button of the gas burner to off (top) mode

Gas Cutting safety device.
It cuts the gas in case that a liquid extinguishes the fire by boiling over.

By pushing the button towards and reversing it anti-clockwise, start the fire. After catching fire, hold the button for 3-5 seconds more and let the safety device come into action.

ATTENTION:
If the burner does not catch fire after you hold down the button for 15 seconds, release the button. Before trying again, wait at least one minute. The gas which has not burned may explode!

CARE AND CLEANING

General instructions
If the product is cleaned regularly, the lifetime of the product is extended and the frequently encountered problems are reduced.

WARNING:
Unplug the appliance before starting the maintenance and cleaning operation! There is a risk of electric shock!

WARNING:
Let the device cool down before cleaning. Hot surfaces may cause burns!

The appliance should be cleaned well after each use. Thus, food residues are cleaned easily and these residues are prevented from burning on the next use.
You can clean the appliance with a dish detergent, warm water and a soft cloth or a sponge, and then dry it with a dry cloth.
After cleaning, make sure that you clean the food residues completely and clean the splashed food with water immediately.
Do not use cleaning materials containing acid or chloride while cleaning the holders, inox or stainless surfaces.
Use a soft cloth and a liquid (not abrasive) detergent and wipe it in the same direction

Some detergents may harm the surface. While cleaning, do not use abrasive detergents, cleaning dusts and sharp materials. Do not use steam cleaners.

Cleaning of cooktop

Gas-operated cooktops

Remove the pot carriers and burner heads and clean them.
Clean the cooktop.
Use potassium stearate (soft soap) which can be easily found in the market to remove stubborn dirt and stains.
Make sure that you attach the burner heads at the right places and inserted tightly.

Sugar based foods such as thick cream and syrup should be cleaned immediately before the surface cools down. Otherwise, the glass surface might get damaged permanently.
In time, there may be color changes and fades on the surfaces. This would not affect the way that the appliance operates. The fades and stains on the glass surface are normal and should not be considered as imperfections.

Cleaning of the control panel
Clean the control panel and buttons/keys with a wet cloth and dry with a dry cloth. Do not remove the control buttons of the control panel in order to clean, otherwise the appliance might get damaged.

Control button
Gasket

Do not remove the gaskets under the control buttons for cleaning.

MAINTENANCE

Maintenance and repair of indoor and indoor gas equipment are carried out at least once a year, taking into account the minimum list of work performed and are a prerequisite for its safe use. Only specialized organizations are entitled to perform maintenance and repair of gas equipment on the basis of a contract. Such organizations should have qualified personnel, material and technical base and an emergency service to eliminate the consequences of incidents on the gas pipeline.

Mandatory maintenance of gas equipment includes:

Checking the tightness of the connections.
The specialist checks the technical condition of the gas stove, cleans the burners.
The specialist regulates the process of gas combustion in all modes of operation of gas equipment.
Upon completion of the work, the specialist makes an entry in the subscription book, signs the certificate of completed work and conducts a safety briefing.

TROUBLESHOOTING

Trouble	Cause	Solution

The cooktop does not catch fire

| · Hood is left “off”

· Gas hose is twisted

· Gas is over

| · Open the hood

· Get the hose in the proper position or replace the hose

· Use a new bottled gas

Smell of gas

| · Gas leakage on the pipe

· Plastic hose is damaged

| · Cut the gas immediately and call the authorized

· service

· Replace the hose

Abnormal fire

| · Bottled gas problems

· Gas nozzle is blocked

· Gas nozzle is not in the right position

| · Use a new bottled gas

· Clean the gas nozzles

· Place the gas nozzle in the right position

Portable heater doesn’t work The lighter doesn’t work

| · There is no electricity

· connection

| · Check the power cable of the cooktop

· Check if there is electricity in the socket

· Call the authorized service

If you cannot eliminate the problem even though you have applied the instructions in this section, please contact the dealer you purchased the product or consult the Authorized Service. Never attempt to repair the broken appliance.

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point. For additional information about actual system of the garbage collection, address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage. After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card.

Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form. The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.

www.timberk.ru