Black Diamond Storm R 500 Headlamp User Manual
- June 10, 2024
- BLACK-DIAMOND
Table of Contents
Black Diamond Storm R 500 Headlamp
Product Information
- Product Name: STORM R 500 LED Headlamp
- Manufacturer: Black Diamond Equipment, Ltd.
- Address: 2084 East 3900 South Salt Lake City, UT 84124
- Website: www.BlackDiamondEquipment.com
- Power Source: Li-Ion Battery
- ANSI FL-1 Standard/Norme
- Weight: 100g
- Burn Time: 350 hours (Low), 19 hours (Medium), 7 hours (High)
- Lumens Power: 6 lm (Low), 250 lm (Medium), 500 lm (High)
- Distance: 12 m (Low), 60 m (Medium), 120 m (High)
- Patents: US6249089B1, US6621225B2, US6650066B2, EP1120018B1, EP1206168B1
Instructions for Use
Charge the Headlamp:
- Connect the charging cable to the headlamp’s charging port.
- Connect the other end of the cable to a power source.
- The charging time is approximately 3 hours.
Using the Headlamp:
Pressing the button on the headlamp will cycle through the different modes:
- Low: 6 lm, 12 m distance, 350 hours burn time
- Medium: 250 lm, 60 m distance, 19 hours burn time
- High: 500 lm, 120 m distance, 7 hours burn time
To turn on the headlamp, press the button once for Low mode. Press again to cycle through Medium and High modes. To turn off the headlamp, press and hold the button for 2 seconds.
PowerTapTM Technology:
The PowerTapTM feature allows you to quickly switch between modes by tapping
the side of the headlamp. To use PowerTapTM:
- Turn on the headlamp in any mode.
- Tap the side of the headlamp to switch to High mode.
- Tap again to switch back to the previous mode.
Lock Feature:
The Lock feature prevents accidental activation and battery drain during
storage and transportation. To activate Lock:
- Press and hold the button for 2 seconds until the headlamp enters Lock mode.
To deactivate Lock:
- Press and hold the button for 2 seconds until the headlamp turns on.
S.O.S. and Strobe Modes:
To access S.O.S. and Strobe modes:
- Turn on the headlamp in any mode.
- Press and hold the button for 2 seconds to enter S.O.S. mode.
- Press again to enter Strobe mode.
- Press again to return to the previous mode.
IMPORTANT: Follow all instructions carefully and keep for future reference.
BATTERY – RECHARGEABLE LITHIUM-ION
- Charging:
- Charge the battery completely before initial use.
- Battery does not need to be fully discharged prior to being recharged.
- Battery will automatically stop charging when fully charged.
- Battery Life: Your battery life will vary depending on:
- “Recovery time” or time when lamp has not been on.
- Temperature.
- Settings used.
- A full charge is needed to achieve maximum burn time!
- Dispose of the device/batteries in accordance with applicable local laws and regulations.
- ANSI FL-1 Standard: Runtime to 10% of initial output.
- Reserve: Additional time the lamp will produce usable light for low intensity activities (measured to .25 Lux @ 4 meters.)
USE / MODES
STORAGE AND TRANSPORTATION
CARE AND MAINTENANCE
Care and Maintenance
Keep the headlamp clean and dry to prevent damage. If the headlamp becomes wet, remove the battery and allow it to dry before use.
Troubleshooting
If the headlamp does not work:
- Make sure the battery is fully charged.
- Check that the battery is installed correctly.
- Contact your Black Diamond Dealer or visit www.BlackDiamondEquipment.com for further assistance.
- If the product does not work:
- Charge the batteries completely
- Check that the USB cord is properly inserted No luck? Contact your Black Diamond Dealer or www.BlackDiamondEquipment.com.
Warnings:
- This product meets the requirements of the EMC (electromagnetic compatibility) Directive 2014/30/EU and the RoHS Directive 2011/65/EU.
- The Declarations of Conformity for this product can be viewed at www.blackdiamondequipment.com/DOC.
- A responsible adult must supervise use by children under the age of 12
- Inspect your headlamp for proper operation prior to using and, for critical situations, carry a second light and sufficient spare batteries
- Do not stare directly into the beam or shine it directly into others’ eyes. Intense light can damage your eyes or the eyes of those around you. Black Diamond Equipment is not responsible for the consequences, whether direct, indirect or accidental, or for any other type of damage arising or resulting from the use of its products.
LIMITED WARRANTY
We warrant for three years from purchase date and only to the original retail buyer (Buyer) that our lighting products (Products) are free from defects in material and workmanship. We do not warrant Products against normal wear and tear, improper use, or improper maintenance. If Buyer discovers a covered defect, Buyer should return the Product to the place of purchase. In the event that this is not possible, return the Product to us at the address provided. The Product will be repaired or replaced at our discretion. That is the extent of our liability under this Warranty and, upon expiration of the applicable warranty period, all such liability shall terminate. We reserve the right to require proof of purchase for all warranty claims. This Warranty gives you specific rights, and you may also have other rights which vary from state to state. Except for expressly stated in this Warranty, we shall not be liable for direct, indirect, incidental, or other types of damages arising out of, or resulting from the use of Product. This Warranty is in lieu of all other warranties, express or implied, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose (some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on the duration of an implied warranty, so the above exclusions may not apply to you).
This Black Diamond product meets the requirements of the EMC (electromagnetic
compatibility) Directive 2014/30/EU and the RoHS Directive 2011/65/EU. It also
meets the requirements for Electromagnetic Compatibility Regulations 2016 and
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 as brought into UK law.
The Declarations of Conformity for this product may be viewed at
www.blackdiamondequipment.com/DOC.
FCC
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio, television, cell phone or avalanche beacon reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the product and receiver.
- Turn the product off or to a different setting. Industry Canada ICES-005 Compliance Label: CAN ICES-005 (B)/NMB-005(B)
North America: Black Diamond Equipment, Ltd.
2084 East 3900 South
Salt Lake City, UT 84124
Europe: Black Diamond Europe
Hans-Maier-Straße 9
6020, Innsbruck, Austria
www.BlackDiamondEquipment.com
This product is protected by one or more of the following patents. Other patents pending.
References
- Black Diamond® Equipment | Climbing, Skiing & Trail Running Gear
- BrandPortal
- Black Diamond® Equipment | Climbing, Skiing & Trail Running Gear
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>