sudio N2 Pro True Wireless Earbuds Owner’s Manual

sudio N2 Pro True Wireless Earbuds

Battery indicator

• Use a wireless charger or USB-C.
• Amber/white light = charging.
• White light = charged.

HOW TO USE

• LED blinks amber light when
• low battery (0-25%), and white light
• between 26%-100%
• Place earphones in the charging case &close the lid to turn them off.
• Open the lid to turn it on.
• Studio Help Center
• SUDIO.COM/HELPCENTER

WHAT’S IN THE BOX

1. N2 Pro
2. Charging cable
3. Eartip holder
4. Warnings
5. Owners manual

1. Place earbuds in case
2. Close lid
3. Open the lid & connect device

• 1 tap
• Tap 2x left
• Tap 2x right
• Vol Tap 3x right
• Vol Tap 3x left

1. To turn Voice Assistant on/off hold L side for 2 sec
2. To turn ANC on/off hold R side for 2 sec

• Accept calls :1 tap
• Hang up or reject calls: Hold button 2 seconds

1. Put earbuds in case
2. Hold the button on the case for 5 sec with the lid open
3. Light blink 2x

FCC STATEMENT

• This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

• The device has been evaluated to meet the general RF exposure requirements. The device Can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>