Qolsys QS-ZW8 Z WaveAH Plus Module Instructions
- June 10, 2024
- Qolsys
Table of Contents
Qolsys QS-ZW8 Z WaveAH Plus Module
General Applications
The Qolsys Z-WaveAH Plus Module features the 800 series Z-Wave Wireless Microcontroller silicon from Sigma Designs, providing an air interface to certified Z-Wave devices. OEMs that integrate this module will be able to connect to a variety of smart devices for home automation and control, for example: thermostats, door locks, light bulbs, and electrical outlets. Note: these smart devices must be Z-Wave certified.
Installation and Operation
The module has a simple 8 pin header interface for power, reset, and UART
connections. The mounting screw is required for mechanical stability and to
ensure a robust ground connection. The antenna is permanently fixed to the
module. Do not place any large pieces of metal around or near the antenna, as
it will inhibit performance. Do not modify the antenna in any way.
The Qolsys QS-ZW8 Module operates at 908.4 / 916 MHz for US and Canada. It may
operate at 919.8 / 921.4 MHz for Australia / New Zealand with an output power
up to +4dBm. Data and protocol specifications are beyond the scope of this
document. Please contact Qolsys for the technical specifications.
FCC Compliance
FCCID: 2AAJXQS-ZW8 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Warranty Information: IMPORTANT! Changes or modifications not expressly
approved by Qolsys Inc. will void the user’s authority to operate the
equipment, as well as warranty for the product.
Warranty Information
IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. will void the user’s authority to operate the equipment, as well as warranty for the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>