SHENZHEN 2A39B REMOTE Smart Remote Control User Manual
- June 10, 2024
- Shenzhen
Table of Contents
2A39B REMOTE Smart Remote Control
User Manual
2A39B REMOTE Smart Remote Control
Specification
| Video Resolution | 1920×1080, 1280 * 720, 640×480 etc |
|---|---|
| Frame Rate | 1080p@60FPS/sec; |
| Image sensor | 2.0M, 1/2.7 inch |
| Fomat | JPEG, YUY2 |
| Aperture F value | F/N2.0 |
| View Angle | 76 degree, Vertical distortion-free |
| Private shutter | Yes, built in |
| Focos method | Auto focus (AF); |
| MIC | 35db+ high sensitivity, SNR65d2 signal-to-noise ratio, 2 – channel stereo |
noise reduction dual MIC, 3m long-distance pickup clear and natural.
Light App| Rotating Infinitely dimmable, Touch 3 colors beauty fill-in light
| Photo or video: use camera software of systems(for Windows camera and for
MAC OS photo shown) ect.
System Compatible| Windows® XP SP2, Windows 7 / 8 / 10/ Mac OS 10.6Linux
2.6.24 OR /Chrome OS 29.0.1547.70/, Android V 5.0/Smart TV and TV BOX , XBox
One”; Ubuntu(R) Linux 10.04;OBS, Facebook, YouTube, Xbox one, xsplit, Skype
Configuration requirements| 2.4GHZ Intel Core2 DuoProcessor or higher, 2GB of
ram or higher, USB2.0 port (USB3.0 is required for 4K products);
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
- This equipment should be installed and operated with minimum distance 0mm between the radiator and your body.
- The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
followingmeasures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2A39B-REMOTE
Documents / Resources
|
SHENZHEN 2A39B REMOTE Smart Remote
Control
[pdf] User Manual
2A39B REMOTE Smart Remote Control, 2A39B REMOTE, Smart Remote Control, Remote
Control
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>