Waterworks RM33 Blizzard Chilled Water Bubbler Fountain Instruction Manual
- June 10, 2024
- Waterworks
Table of Contents
RM33 Blizzard Chilled Water Bubbler Fountain
Product Information
The RM33 Blizzard is a foot-activated bottle filler designed for providing hygienic cold water without the need to touch the tap with your mouth or hands. It has a rustproof cabinet with an IP33 rating that gives extra protection against dust, dirt, and moisture. The 1.9-liter stainless steel tank and internally fitted drain provide unparalleled vandal resistance. The product comes with a 12-month comprehensive warranty.
- Optional Features: The RM33 Blizzard can be equipped with optional features like an internal or external Waterworks filter to reduce sediment, chemicals, organic compounds, and impurities to enhance the quality and taste of drinking water. A 1.5m temporary drain kit is also available for temporary installations like construction sites.
- Installation Connections: The product comes with a 1.5-meter power cord with a standard 3-pin plug for electrical connection. The inlet is an industry-standard 1/2 female BSP threaded connection situated at the rear of the cooler for water connection. The drain outlet and integrated p-trap provide an industry-standard 40mm connection situated on the rear of the cooler.
- Ordering Codes: The RM33 Blizzard is available with a glass filler only model with the ordering code RM33FA.
Product Usage Instructions
- Ensure that the product is installed in accordance with local plumbing laws. Failure to install a certified Pressure Limiting Valve will void the warranty.
- Connect the product to the electrical supply using the provided power cord with a standard 3-pin plug.
- Connect the water inlet to an industry-standard 1/2 female BSP threaded connection situated on the rear of the cooler. Follow the installation instructions for exact rough-in details.
- Connect the drain outlet to an industry-standard 40mm connection situated on the rear of the cooler. Follow the installation instructions for exact rough-in details.
- Press the foot activation pedal to dispense hygienic cold water into your bottle or glass.
- If equipped with an optional Waterworks filter, replace the filter periodically as per the manufacturer’s instructions to maintain water quality.
- If service, maintenance, or filter replacement is required, remove the front access panel secured with four concealed stainless steel screws.
The new foot activation pedal ensures hygienic cold water, no need to touch the tap with your mouth or hands!
RUST PROOF CABINET
The new IP33 rating gives extra protection against dust, dirt and moisture, making the RM33 Blizzard perfect for construction sites, schools and mines.
TANK
1.9litre stainless steel tank.
SERVICE ACCESS
The front access panel is secured with four concealed stainless steel screws.
Removal of this panel provides access for any purpose including service,
maintenance and filter replacement.
VANDAL RESISTANCE
The RM33 Blizzard has a one piece rota moulded polyethylene cabinet which can
be easily anchored to almost any surface. Along with the internally fitted
drain, this provides unequaled vandal resistance.
OPTIONAL FEATURES
FILTRATION
An internal or external Waterworks filter will reduce sediment, chemicals,
organic compounds and impurities which can adversely affect the quality and
taste of your drinking water. If a filter is required, please specify on
order.
TEMPORARY DRAIN KIT
1.5mtr temporary drain kit is available for temporary installations such as
construction sites.
INSTALLATION CONNECTIONS
ELECTRICAL
A 1.5 metre power cord with standard 3 pin plug is provided. Power consumption
Ambient Temp 25deg. (kw.h/24h) 0.044. Power cord inlet 300mm from base on rear
of unit.
WATER INLET
The inlet is an industry standard 1/2” female BSP threaded connection situated
on the rear of the cooler, (see installation instructions for exact rough in
details).
DRAIN OUTLET
The drain outlet and integrated p-trap provide an industry standard 40mm
connection situated on the rear of the cooler. (see installation instructions
for exact rough in details).
To be installed in accordance with local plumbing laws. Failure to install a
certified Pressure Limiting Valve will void warranty.
WARRANTY
The warranty provides comprehensive parts and labour coverage for the period
of 12 months from the date of original sale.
SHIPPING DETAILS:
- PACKED WEIGHT: 28kg
- PACKED VOLUME: 0.208M3
- PACKED DIMENSIONS: 420mmW x 420mmD x 1180mmH
ORDERING CODES:
- CODE: RM33FA
- DESCRIPTION: RM Blizzard with glass filler only
CAPACITY:
- MODEL NUMBER: RM33
- AMBIENT TEMP: 32°C
- INLET TEMP: 27°C
- LITRES/HR 10°C WATER: 30 LPH
- RESERVOIR VOLUME: 1.9 Litre
Based on intermittent use under environmental conditions of ARI Standard 1010 and installation requirements of ARI Standard 1020. Due to our policy of continuous development, specifications are subject to change without notice. Colour is as close to actual as printing processes allow.
DIMENSION
INLET:
- 860mm ABOVE BASE
- 100mm LEFT OF CENTRE LINE (from back)
OUTLET:
- 860mm ABOVE BASE
- 30mm LEFT OF CENTRE LINE (from back)
Waterworks Australia
ABN 91 902 793 936 48-50 Neumann Road Capalaba Queensland 4157 Bulk Warehouse:
53 Neumann Road Capalaba Queensland 4157
Phone: (07) 3390 3777
Email:
[email protected]
Web site at:
www.waterworksaustralia.com