SUNNY HEALTH FITNESS HR200 Rate Monitor User Manual

May 16, 2024
SUNNY Health Fitness

SUNNY-LOGO

SUNNY HEALTH FITNESS HR200 Rate Monitor

SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-PRODUCT

PRODUCT INFORMATION

MODEL NAME: SUNNYFIT HEART RATE MONITOR HR200

PRODUCT INTRODUCTION

Thank you for choosing the SunnyFit Heart Rate Monitor. Our product was developed to transmit real-time heart rate data through Bluetooth or ANT+ to fitness apps or your device, to help you manage your exercise intensity scientifically. Please keep this user manual for future reference.

NOTE: This product is for recreational use only and is not intended to replace any medical device.

PRODUCT ACCESSORIES

SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(2\)

PRODUCT SPECIFICATIONS

SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- 14

For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669)

FUNCTION AND OPERATION

  • Turn-on : Press the start-up button, and the LED light will flash blue quickly until the heart rate is found.
  • Turn-off : Hold the start-up button for 2 seconds, the LED will flash a red light and vibrate, then enter the shutdown state.SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(3\)

HEART RATE INDICATOR
Max Heart Rate (MHR) = 180 (default)

  • Below 60% MHR:
    The soft green light will flash once every 5 seconds without a Bluetooth connection. When Bluetooth is connected, it will flash once every 3.4 seconds like a breathing light.

  • 60%~70% MHR:
    The dark green light will flash once every 5 seconds without a Bluetooth connection. When Bluetooth is connected, it will flash once every 2.4 seconds like a breathing light.

  • 70%~80% MHR:
    The yellow light will flash once every 5 seconds without a Bluetooth connection. When Bluetooth is connected, it will flash once every 2.4 seconds\ like a breathing light.

  • 80% ~ 99% MHR:
    The red light will flash once every 5 seconds without a Bluetooth connection. When Bluetooth is connected, it will flash once every 1.4 seconds like a breathing light.

  • Exceed 100% MHR:
    The red light will flash once every 5 seconds without a Bluetooth connection. When Bluetooth is connected, it will flash once every 1.4 seconds like a breathing light and the sensor will vibrate 3 times continuously.SUNNY-
HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(4\)

POWER

  • Low Power Alert : LED will flash red and green alternately and vibrate once.
  • How To Charge : Put the Charging Cable on the Charging Terminals, then connect the USB to a power source.
  • Charging : LED will flash green when charging and will stay green when fully charged.SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(5\)

WEARING
Wear the armband on the upper portion of the forearm. The monitor should be on the inside or top of the forearm. It should be worn snugly enough not to move on your arm, but NOT so tight that it restricts arm circulation.

SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(6\)

APP CONNECTION INSTRUCTIONS

  • Scan the QR code below to download the SunnyFit app.
  • You can also download the SunnyFit app from the App Store or Google Play Store. SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(7\)

GET IT ON

Google Play Download on the App Store
The monitor is compatible with other popular fitness apps, such as Wahoo/Polar Beat/ Strava/Zwift/Peloton.

If you are unable to replicate these steps or have any other issues with the SunnyFit app, please contact SunnyFit support at support@sunnyfit.com or use the in-app “Contact Us” form to request support (“Me” tab -> “Contact Us”).

  • Press the start-up button to turn on HR200.
  • To connect, go to the “Workout” tab and choose “Indoor” or “Outdoor” at the top, then top on the “Search” button at the bottom right of the screen.SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(8\)
  • You should see the SunnyFit Heart Rate Monitor (HR200) appear, press “Select”.
  • You can now check your heart rate data.
  • After connecting the device, you can enter the “Equipment” panel from the “Me” tab.SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(11\)
  • Click on “Detail” to review the heart rate data.SUNNY-HEALTH-FITNESS-HR200-Rate-Monitor-FIG- \(12\)
  • Once the connection between the Heart Rate Monitor and Sunnyfit app is established, your heart rate will be displayed where available depending on the module and type of workout session you select.

DISCLAIMER

  • The information in this manual is for reference only. The product may be subject to change based on the manufacturer’s research and development without notice.
  • We shall not make any statement or warranty about this manual or the product.
  • We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product.

Caution : The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC & IC: Radiation Exposure Statement This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

DOWNLOAD
Track your fitness progress & join

FREE workout courses! Download SUNNYFIT® today!

Find us on social media @sunnyhealthfitness

sunnyhealthfitness.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SUNNY Health Fitness User Manuals

Related Manuals