Sami WS-2371 Reloj Wearable Smartband Azul Space Kids User Manual

: June 10, 2024
: Sami

Sami WS-2371 Reloj Wearable Smartband Azul Space Kids User Manual

Thank you for purchasing the Sami wearable WS-2371. Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and we use the best components possible for the product.

1. Quick start guide

Overview

Touch screen
Heart sensor
Charging PINS

Make sure the pins on the charging cable fit correctly onto the charging terminals on the back of your smart watch.
Plug the big end of the USB cable into the power supply, match the magnetic end with the watch, after charging successfully, a charging icon will appear on the screen.
NOTE: Do not have the charger connected to AC and the magnets touching any metallic surface, this will create a high heating of the cable and will damage it

Thank you for purchasing the Sami wearable WS-2371.
Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and we use the best components possible for the product.

STARTING**

Install “Fit4Kid” app on the phone
Search and install the “Fit4Kid” app from Google Play or
App Store. Or scan the following QR code to install the app directly.

Connect the smart watch with the phone

Enable Bluetooth on your smart phone.
Open the “Fit4Kid” app on your smart phone, and then fill in all the requested information in the “Settings” menu.
Tap “Connect device” in the “Settings” menu.
Select the smart watch icon to connect.
Choose your device name to connect it with your phone.
Please note that you must connect through the app and not by the bluetooth menu of your phone.
You will see pop up windows of permissions while installing, please accept all of them for the correct functioning specially referred to location and background execution.

Unbind smart watch with mobile phone

Open “Fit4Kid” app on your smart phone.
Tap “Disconnect device” in the “Settings” menu and confirm “OK”.
To disconnect your smart watch with an iPhone, click“Disconnect device” in the “Settings” menu of
“Fit4Kid” app, and go to the Bluetooth settings on your iPhone, then access and select “Forget This Device”.

Operation Introduction

To turn on your watch, press and hold the key until the display lights up.
To switch off the watch, slide the screen from right to left on main interface to enter in sub-menu, and then slide the screen up and down to enter in settings, you will find power off icon
You can press the touch screen, or turn on gesture control in advanced settings of Fit4Kid and then raise your hand to light the

2. How to use

Power on: Press and hold the button on the side of the watch for about 3
Go to main menu: Slide from right to left on main interface; slide up and down to check more functions
Select a function: Slide up and down; tap the
Confirm: Tap the
Exit menu: Slide from left to right on the
Check notifications: Slide from left to right on main

After turning on the smart watch, the main interface will be displayed.

From the main interface:

Go to the main menu
Slide from right to left to enter the main
Slide up and down to check more
Tap the icon to enter the sub Slide from left to right to return to the previous menu.
Go to the notification shortcut interface
Go to other shortcuts screen Slide up and down from the main interface

No. 1 Brightness
You can adjust screen brightness by click this icon.
No. 2 Find phone
When your smart watch is connected with Fit4Kid, you phone will ring by click this icon.
No. 3 Shut down
You can shut down your smart watch by click this icon.
No. 4 About
You will find name, address, and firmware version by click this icon.

4. Functions

Watch faces

There are 3 watch faces. In current watch face, press and hold the center of the touch screen to choose the one you like.

Daily activities

The watch will record your daily activity automatically. Press the step icon to check pedometer, distance and calories. After synchronizing with APP, these sports data can be also checked in APP.
Heart rate monitor Select the heart rate icon to monitor your current heart rate.
To exit the heart rate monitor, please slide to right.

If you’ve connected your smart watch with APP via
Bluetooth, you can also check your heart rate data in the app.

Multi-Sport

Tap the sport icon to enter the multi-sport mode.
The smart watch has 4 sports modes: walking, running, hiking and cycling. Choose a sport mode you want, and then do sports. The smart watch will record your exercise data

If you want to end the sports, slide the screen to right and tap the stop icon to finish your sports and save the data. The smart watch displays your exercise data after that. If you’ve connected your smart watch with Fit4Kid via Bluetooth, you can also check your exercise data in

the app

Note: if the exercise time is less than 5 minutes, the data cannot be saved.
Sleep monitor

The smart watch automatically monitors your sleep from 10p.m. to 9a.m.
When you get up the next day, the smart watch displays your sleep report about the time of total sleep, light sleep and deep sleep. If you’ve connected your smart watch with APP via Bluetooth, you can also check more detailed sleep report in the app.

Weather

If you’ve connected your smart watch with Fit4Kid via
Bluetooth, the smart watch will display the weather forecast.
You can manually set the city or automatically set a city in APP.

Alarm

By tapping the alarm icon, you can see the alarm timer you’ve set in APP. When alarm time is up, the alarm icon will be animated and the smart watch will vibrate.

Notification

Slide the watch face from left to right, and then you can
check your phone calls, SMS, QQ, WeChat, Whatsapp, Facebook and Twitter notifications, etc.

Remote capture

To use this feature, make sure the camera of your smart phone is on. With the remote capture function, you can take pictures remotely from your smart watch. Music playback control
Tap the music icon to enter the music playback

Stopwatch

Press Start to time ,To exit Stopwatch，slide the screen from left to right.

Sedentary

Tap the icon to enter the sedentary settings. You can turn the function on or off. Slide the screen to right to exit. You can also go to the “Activity&Wellness” under the “Health Reminder” of APP to set the time intervals (minutes), start time and end time.

Tap this icon to enter the watch game function Pedometer

Tap this icon to enter the Pedometer game. Completing the corresponding steps will show different characters Math

Tap this icon to enter the Math game. Each correct answer is 10 points. If you collect 100 points, you will pass the game.

Puzzle

Tap this icon to enter the Puzzle game, enter the game and the final rendering will appear. Tap 9 pictures on the
screen to start the game randomly. Tap the picture next to the space to swap positions with the space. After the puzzle is completed, it will enter the next puzzle.