Sami WS-2362 Wearable XSLIM Smart Band User Manual

Sami WS-2362 Wearable XSLIM Smart Band

Thank you for purchasing the Sami wearable WS-2362. Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and we use the best components possible for the product.

DESCRIPTION OF THE WEARABLE

CONTENTS.
Wearable, Magnetic USB cable, instruction manual.

CHARGING

Connect the device to a computer or laptop with the USB Magnetic cable for charging. Put in contact the magnetic end of the USB cable with the charging points positioned in the back of your device. Kindly use only the USB cable included with the wearable. If you use a power adapter for charging, the output of the power adapter should be 5V, 1A. Charging time: 2 hours. Please charge the device fully before using. Be careful the charging cable shall not be laid on any metal objects with its end which have metal contacts, in case the charging cable damaged due to short circuit.

HOW TO POWER ON / POWER OFF?

1. To turn ON the smart band, long press the Power button for few seconds to make it Power On.
2. To turn OFF the smart band, long press the Power button for few seconds until the Power OFF interface displays, then select Yes to make it Power Off; or on the smartband, setting  Power Off.

HOW TO CONTROL?

1. On the display screen(touchscreen), short tap the touchscreen to select; long touch the screen to enter; tap and slide from the left towards right to return; tap and slide towards left/right/up/down to change between the different menu pages.
2. Short press the Power button to return. Long press the Power Button to make it Power On/Off.

GETTING STARTED

For Android

1. How to obtain the BT Connection APK (DA FIT)
   Search for the DA FIT in the Google Play; download it and install it in your Android smartphone, or go to our website www.sami.es and download the application.

2. Installation of the DA FIT APK.
   When installing the DA FIT application on your Android, you must allow all the Application Permissions, allow this DA FIT app auto run.
   The first time you run this DA FIT, it will ask you to Enable Notifications, please tap OK and tap the DA FIT and confirm OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission management, allow all application permissions. Please allow locations services and background permission for correct use of the device.

3. How to make the wearable pair with your Android smart phone

   • First, turn on the Bluetooth of your Phone.
   • Second, run the DA FIT app on your Phone, on the home page of DA FIT, select “TO ADD”, the APP will search for new Bluetooth device(s), when the available Bluetooth device displays, please select WS-2362 (the BT name of this device) to make it pair. The pairing will be finished in a few seconds. When you pair for the first time, the app DA FIT will ask you to fill some personal information such as gender/age/height/weight. Must select OK/Confirm/Allow/Yes for any pop-up requests. Please allow locations services and background permission for correct use of the device.

Now you can start using your desired functions of the smart band.

Important: To enable all notifications of different softwares such as WhatsAPP, Facebook, Skype, Twitter, you may need to turn on the notifications on the APP manually. On the DA FIT homepage, select the Settings icon (middle icon situated at the bottom of the interface) then select notifications,  and turn on all the APP notifications you want to active.
Also you must access to settings in your Android device and in the menu of apps give the corresponding permissions to DA FIT.

For iPhone

1. How to obtain the BT Connection APP? (DA FIT)
   On iPhone, please go to APP Store and search DA FIT and install the app.

2. How to make the wearable pair with your iPhone

   • First, turn on the Bluetooth of iPhone
   • Run the DA FIT app on the iPhone, on the home page of DA FIT, tap “ADD A DEVICE” the APP will search for new Bluetooth device(s), when the available Bluetooth device displays, please tap WS-2362 (the BT name of this device) to make it pair. The pairing will be finished in few seconds. When you pair for the first time, the app DA FIT will ask you to fill some personal information such as gender/age/height/weight. Must select OK/Confirm/Allow/Yes for any pop-up requests. Please allow locations services and background permission for correct use of the device.
   • Now you can start using your desired functions of the smart band.

Important: To enable all notifications of different softwares such as WhatsAPP, Facebook, Skype, Twitter, you may need to turn on the notifications on the APP manually. On the DA FIT homepage, select the Settings icon (middle icon situated at the bottom of the interface) then select notifications,  and turn on all the APP notifications you want to active.

PRODUCT FEATURES

BLUETOOTH 5.0 LE (Low Energy)
FULL TOUCH SCREEN. Capacitive touch screen 1.69″
BUILT IN VIBRATING MOTOR
BUILD IN HEART RATE SENSOR
BUILD IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN (Quick View) – raise up your hand to light up the display screen
MENU STYLE SWITCH (Honeycomb style, Listing style) – On home screen tap and slide from upper side towards down to find it.

DISPLAY SCREEN INTERFACE

To switch Dials
On home screen, long touch the display screen until the display screen zoom out, slide left/right to change dial. More dials available at Da Fit apk/app.

On home screen tap and slide from top towards down
Shortcut menu for the following functions:

1. Do not disturb mode: you will not receive notifications
2. Theatre mode: you will not receive notifications and brightness will go to minimum
3. Torch
4. Menu Style selection: Honey Comb or List style
5. Brightness
6. Weather
7. Settings: access to settings menu.

On home screen tap and slide from left towards right

1. Steps
2. Sleep : you must wear the watch while sleeping. Workable only when more than 3 hours sleep.
3. Hear Rate monitor
4. Training : different sports options such as walking, running, cycling, skipping, badminton, basketball, football.
5. Blood Pressure test
6. Oxygen measure
7. Weather forecast
8. News : push notifications up to 5 previews
9. Shutter : camera remote shutter – at Da Fit enter the shutter and activate and then can control your smartphone´s camera
10. Music player controller
11. Breathe : relax mode exercise
12. Stopwatch
13. Alarm : can set up to 3 alarms a través de la app Da Fit
14. Countdown
15. Flashlight : torch
16. Others: – Brightness, Shake(vibrate on/off), Disturb(do-not-disturb), Theater, Dial switch, Reset, Power Off, QR Code, About (device info)

On home screen tap and slide from right towards left

1. Steps (pedometer) – steps, distance, calories.
2. Sleep monitor
3. Heart rate monitor – short tap to start/stop. Must wear it on band before using this function.
4. Blood Pressure test – short tap to start/stop. Must wear it on band before using this function.
5. Blood Oxygen test (SPO2)– short tap to start/stop. Must wear it on band before using this function.
6. Weather – it will only be display after the smartband is pairing successfully

On home screen tap and slide from bottom towards up
Message (PUSH messages)

NOTE: If the weather does not appear on the smart device after the Bluetooth pairing, please set your weather city at the Da Fit APP, then restart the smart device. The location service on your phone should be activated also.
Data can be sync from the wearable to the smart phone on the DA FIT APK/APP. Your smart phone will synchronized when the Bluetooth is paired with this device.

More functions in Da Fit APP

1. Watch faces (dials) – discover more dials and download it and sync it to the smartband, set personalized dial with our pictures too.
2. Notifications – turn on/off for push notifications for Incoming Phone Calls, SMS, Facebook, Twitter, WhatsApp, etc.
3. Alarms – Alarm clock
4. Shutter – remote camera control (remote shutter)
5. Others – find device, Sedentary reminder, Do-not-disturb, Languages, Reset, Quick View (gesture control raise hand to light up screen), Drink water reminder, Weather, Physiological cycle reminder for ladies.
6. GPS MAP TRACE (view it on the DA Fit app). On the home page of the Da Fit, tap and select the left bottom icon, and then scroll down and select Outdoor Running, tap Start, select the Map icon (this icon is on the right bottom of the screen), to view the map. On the home page of the Da Fit, scroll down and select Outdoor running, tap the history record icon(this icon is situated on the right top of the screen) to view the GPS trace history.
7. GOAL TRACKING- supported on the DA FIT APK/APP

This product is not a medical device, the data results are for reference only, not as a basis for diagnosis and treatment.

CLEANING
In order to avoid any damage on the plating or printing of your wearable please do not use any chemical product for cleaning such as alcohol 96º. We recommend you to use a slightly wet cloth.

TECHNICAL SPECIFICATIONS

Display screen: Capacitive fully touch screen 1.69″.
Screen resolution: 240×280 pixels.
Internal Memory: RAM 160KB, ROM 128MB
System: Nucleus
CPU: Realtek RTL8762C
Charge I/O port : USB magnetic cable
Battery: Built in Li-polymer 200 mAh
Stand by time: 7~14 DAYS
Working time: 7 DAYS
Bluetooth: BLE 5.0
G Sensor: Shilan Micro SC7A20 triaxial sensor
Water-resist Rating: IP67 (this device resists raindrops; it’s not waterproof, do not put it inside water)
Weight: 35g (with silicone straps)

Declaration of Conformity

Hereby we,

Name of manufacturer: SANTOSHI SL
Address: CALLE FELIPE ASENJO N.56
Zip code & City: 28947 – FUENLABRADA ( MADRID )
Country: SPAIN

declare that this DoC is issued under our sole responsibility and that this product:

Product description: Smart Band
Type designation(s): WS-2362
Trademark: SAMI WEARABLE

is in conformity with the relevant Union harmonization legislation:

DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU

Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.

with reference to the following standards applied:

EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)

Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 25 / 10 / 2021

References

• SAMI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>