Interactive TECHNOLOGIES CS-3480 Universe for CueServer 3 Flex Installation Guide
- May 15, 2024
- Interactive TECHNOLOGIES
Table of Contents
Interactive TECHNOLOGIES CS-3480 Universe for CueServer 3 Flex
Specifications
- Model: CS-3480 Serial: 600000
- Power Input : 12-24V DC, 15 Watts Max (Only needed if not using PoE)
- LAN Connections: LAN A/B for primary power provided by PoE or PoE+
- Audio: Audio Input/Output via standard 1/8 audio cables
- Memory Card: MicroSD Memory Card included, pre-installed
- Protocols: May be configured for DMX, Station Bus, or RS-485
- Expansion Slots: 4 Smart Module Expansion Slots for optional Smart Modules
- Touchscreen Display: Color graphic touchscreen for system status and control
Mounting
Desktop Mounting
CueServer 3 Flex comes with small rubberized feet for secure placement on a
desktop, rack shelf, or tray.
Panel Mounting
CueServer 3 Flex can be panel mounted using the included side flanges.
Attach the flanges with the provided screws to mount securely on a panel
surface.
DIN Rail Mounting
Secure CueServer 3 Flex horizontally onto standard DIN Rail using the
included spring-loaded clips attached with screws. DIN
Rail must be provided separately.
Safety Instructions
- Ensure proper grounding by using the grounding screw for an
- Earth ground connection. Follow all electrical connection guidelines as outlined in the manual.
Product Usage Instructions
- Powering: Use LAN A/B for primary power via PoE or PoE+. Alternatively, use the DC Power Input with 12-24V DC if not using PoE.
- Audio: Connect standard 1/8 audio cables to Audio Input/Output for timecode input or sound effects/music output.
- Memory Card: Utilize the included MicroSD Memory Card for storage and operation.
- Expansion Slots: Populate the Smart Module Expansion Slots with available Smart Modules as needed.
- Touchscreen Display: Use the color graphic touchscreen for system monitoring, control, and settings adjustment.
Overview
CueServers are powerful lighting control and show playback processors designed to be completely self‑contained and extremely cost-effective. Available in a series of models, these powerhouse controllers provide limitless solutions to the lighting professional.
Mounting
CueServer 3 Flex can be mounted in a variety of ways. See the corresponding
images to the right
- Desktop Mounting
- CueServer 3 Flex comes with small rubberized feet that allow it to be securely placed on a desktop, rack shelf, or tray.
- Panel Mounting
- CueServer 3 Flex can be securely panel mounted by using the included side flanges. To attach the flanges to
- CueServer 3 Flex, use the provided screws. The flanges include various holes that can be used with screws, zip-ties, etc. to mount CueServer 3 Flex to a panel surface.
- DIN Rail Mounting
- CueServer 3 Flex can be secured horizontally onto standard DIN Rail by using the included spring-loaded clips.
- Use the included screws to attach the clips to the bottom of CueServer 3 Flex.
- Please note that DIN Rail is not included and must be provided by the customer.
Safety Instructions
- Read and follow all safety instructions.
- Save these instructions and deliver them to the owner after installation.
- Installation and service should be performed by a qualified person(s).
- Disconnect or turn off the power before installation or servicing.
- The product must be grounded using the provided grounding attachment point.
- Verify supply voltage with product specifications before applying power.
- Do not exceed the maximum wattage, ratings, or published operating conditions of the product.
- Do not overload.
- Follow all manufacturer’s warnings, recommendations, and restrictions to ensure proper operation of the product.
- Electrostatic Discharge (ESD) can damage this product. Personal grounding equipment must be worn during installation and servicing.
- Do not modify the product.
- Do not use the product for anything other than its intended use.
- For indoor use only. Not for damp locations. See the datasheet for operating temperature and humidity conditions.
- Do not use the product for life safety or in any situation where a product failure could cause harm to people or property.
- Failure to follow these instructions could void the product warranty
Panel Overview & Electrical Connections
- Power/Status LED
- Illuminates solid Blue when powered by DC Input, Green by PoE, and Cyan by PoE+. Various flashing patterns and colors during startup, log messages, errors, or firmware updates. See User’s
- Manual for more information.
- Touchscreen Display
- Color graphic touchscreen for system status, monitoring, control, and operational settings.
- DC Power Input
- Only used if not powered by PoE. The nominal input voltage is 24V DC.
- Reset Button
- Can be used to return to factory defaults. See the User’s Manual for more information.
- USB-C
- At this time USB-C is only used by the factory.
- Audio Input/Output
- Connect standard 1/8” audio cables to Audio Input and/or Audio
- Output for providing LTC Timecode input, or to receive sound effects and music output.
- MicroSD Memory Card
- Show programming data is stored on this card. CueServer 3 Flex comes with a card already inserted in this slot. Cards can be moved between CueServer processors when the power is off.
- MicroSD Busy LED
- Illuminates Red when the card is in use.
- Ethernet (and PoE)
- 10/100/1000MB Ethernet network connects to these jacks. The device is normally powered by PoE or PoE+ on the LAN A jack. The device can be configured to combine LAN A and LANB into a single network or to use them as two separate LANs. Ethernet is required during programming and for network-based control protocols.
- Ethernet may be disconnected after programming if not needed.
- Auxiliary DC Output
- May be used to power external accessories, such as Button Stations.
- When powered via PoE, the output voltage is 24VDC. When powered via DC Input, the output voltage is the same as the input voltage.
- Terminal Block Ports (E-H) (if equipped)
- Individually configurable as DMX Input, DMX Output, 5-Wire Station Bus, or RS-485. Only available on the CS-3480 model.
- Grounding Screw
- Attach protective Earth Ground to this screw.
- Smart Module Expansion Slots (A-D)
- Available for system expansion by installing any of the available Smart Modules (SM-xxx). See individual Smart Module documentation for specifications and wiring diagrams.
FAQ
- Q: What is the recommended power source for CueServer 3Flex?
- A: The recommended power source is PoE or PoE+ via LAN A/B. Alternatively, you can use a 12-24V DC power input if PoE is not available.
- Q: How do I reset CueServer 3 Flex to factory defaults?
- A: Press the reset button on CueServer 3 Flex to return it to factory defaults. Refer to the User’s Manual for detailed instructions.
Specifications are subject to change without notice. Interactive Technologies
is not responsible for errors or omissions. All trademarks are the property of
their respective
owners. Copyright © 2022-24, Interactive Technologies, Inc. All rights
reserved worldwide
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>