Shark WV200 Series WANDVAC Cordless Handheld Vacuum FAQs

: June 10, 2024
: Shark

Shark WV200 Series WANDVAC Cordless Handheld Vacuum FAQs

Shark WV200 Series WANDVAC Cordless Handheld Vacuum

This article contains the FAQs for the WV200 Series Shark® WANDVAC™ Cordless Handheld Vacuum. This supports the following product SKUs WV200, WV200C, WV201, WV201BLBRN, WV201GDBRN, WV201GNBRN, WV201PKBRN, WV201RGBRN, WV205, WV220, QV201NV, QV201BK, QV201PR, QV201RD and QV201RG.

FAQs

General questions about using the vacuum:

How do I use my accessories?

Attach accessories to the nozzle for quick and convenient use. To remove an accessory, pull it off the nozzle.

How do I store my vacuum?

Store the handheld vacuum by inserting the nozzle into the ION Charging Dock. You will know it is fully inserted when the blue power button light turns on.

It is recommended that you leave your vacuum on the ION Charging Dock after each use to recharge the battery completely. For optimal runtime, always return your vacuum to the dock after each use.

How long does it take to fully charge the battery?

The battery should take approximately 2.5 hours to reach a full charge.

What is the runtime of the battery on a full charge?

Expected runtime on a full charge is 10 min.

General questions about maintenance:

How do I can the filters and how often?

For optimal performance, clean the fabric filter at least once a month. Rinse filter with water only until water runs clear. Do not use soap or other cleaners. Let filter air-dry for at least 24 hours until completely dry before reinstalling. Between cleanings, lightly tap the filter over the trash to release any excess dust and debris.

How do I empty the dust cup and how often?

For optimal performance, empty the dust cup each time you vacuum.

Turn off the vacuum and hold it over the trash with the nozzle pointing down. Locate the dust cup release button on the top of the vacuum and slide it forward, and the dust cup will drop open. Tap lightly to loosen debris. Wipe the inside of the dust cup clean as needed.

How do I charge the battery?

You can charge your Shark ION W1 by placing it on the ION Charging Dock. Please note that only the ION Charging Dock should be used to charge your vacuum.

Product Specifications:

Where is the product made?

Our products are manufactured by our high-quality Shark manufacturing partners in China

What is the weight of the vacuum?

1.4 lbs (with an accessory)

What are the dimensions of the vacuum?

4.1″ L X 8.1″ W X 15.2″ H

What is the dirt capacity of the dust cup?

0.08 dry quarts

What is the Voltage?

10.8 Volts

What is the Wattage?

115 Watts

What is the Amperage?

10.6 Amps

How long is the charging cord?

The charging cord is 6 feet

What is the vacuum made of?

The Shark ION W1 Cord-Free Handheld Vacuum is produced with a combination of durable ABS, PC+ABS, and PP plastics, along with some metal and rubber components.