JMI TPWUMEDHD5 5 Inch Medium Heavy Duty Wheeley Bar Instructions
- June 10, 2024
- JMI
Table of Contents
TPWUMEDHD5 5 Inch Medium Heavy Duty Wheeled
Bar Instructions
Medium Heavy duty
Whiley Bar – 5” Wheels
User Instructions
SKU: TPWUMEDHD5
TPWUMEDHD5 5 Inch Medium Heavy Duty Wheeled Bar
Contents
| Letter | Quantity | Part |
|---|---|---|
| A | 1 | Wheeled Bar Base |
| B | 3 | Wheeled Bar Legs |
| C | 6 | 5/8” Jam Nuts |
| D | 3 | 5/8” Wing Nuts |
| E | 3 | Fender Washers |
| F | 3 | 5/8” Washers |
| G | 18 | ¼ – 20 x 5/8” Hex Head Cap Screws |
| H | 6 | ¼ – 20 Nuts |
| I | 6 | 3/8” – 16 x 3/4” Hex Head Cap Screws |
| J | 6 | 3/8” Washers |
| K | 3 | Rubber Feet |
| L | 3 | Levelling Screws |
| M | 3 | Gold Zinc-Plated Steel Levelling Screw Feet |
| N | 3 | 5” Wheels |
Installation instructions
- Slide Wheeled Bar legs (B) into Wheeled Bar center (A). Use 2 bolts (I) and 2 washers (J) to secure each leg.
| 
---|---
Once the wheels are all done, the wheeled bar should look like this:
- Flip base with attached legs so it is lying upside-down.
- Align wheel base with wheel (N) to the holes in attached wheeled bar leg. Use 4 hex head cap screws (G) to secure wheel base to wheeled bar leg. Repeat for each wheeled bar leg.
- Flip base again so it is lying right-side-up. The next step is to install each leveling screw (L) into each wheeled bar leg.
Screws should turn freely. Do not force.
The order of the parts should look like this: 
You may use additional hex head cap screws (G) and nuts (H) to screw into side
of base and legs for a more secure attachment.
www.FarpointAstro.com
All the brands you know and love, all under one roof
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>