SATEL PERFECTA 64 M Alarm Control Panel User Manual
- June 10, 2024
- Satel
Table of Contents
SATEL PERFECTA 64 M Alarm Control Panel User Manual
Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the warranty.
Hereby, SATEL sp. z o.o. declares that the radio equipment type PERFECTA 64 M is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.satel.pl/ce
SATEL aims to continually improve the quality of its products, which may result in changes in their technical specifications and software. Current information about the changes being introduced is available on our website. Please visit us at: https://support.satel.pl
ATTENTION!
The alarm system cannot prevent burglary or robbery. Its purpose is to signal emergency situations. It should be installed by qualified professionals who will inform you about the principles of its operation and provide regular maintenance and testing. We recommend that the alarm system be regularly tested to make sure that it will react properly in case of burglary or robbery.
Factory default codes:
Service code: 12345
User 62 code: 1111
The following symbols may be used in this manual:
note,
caution.
Thank you for choosing this product by SATEL. Before you start using the alarm
system, familiarize yourself with the instructions outlined in the following
quick user manual. For more information, please refer to the full user manual
available at www.satel.pl. Scan the QR code to go to
our website and download this or other manuals.
It is recommended that the installer prepare and deliver to the users a customized alarm system user manual. This manual must include all changes and modifications made in relation to the factory default settings.
The installer should train the users in the rules of operating the alarm system.
Using the keypads
The alarm system should include at least one keypad. The following manual
includes instructions on how to use the wired PRF-LCD keypad and the wireless
PRD-LCD-WRL / PRF-LCD-A2 keypad. For instruction on how to use the INT-KSG2R,
INT-TSG2 and INT-TSH2 keypads, please refer to the manuals included with these
manuals
The wired keypad is faster to react to user actions than the wireless keypad. The wireless keypad powered by an external power supply (connected to the APS-055 power supply) works similarly to the wired keypad. In the wireless keypad powered by the battery, the sleep mode is started after 20 seconds of inactivity. When the keypad is in the sleep mode, the display is off and the LED indicators, sound signaling, backlight (of display and keys) and proximity card reader are disabled. To wake up the keypad, press e.g.
LED indicators
green
two LEDs (marked I and II) – ask the installer which LED indicates the state of which partition ON – at least 1 partition is armed flashing – exit delay countdown in at least 1 partition
red
two LEDs (marked I and II) – ask the installer which LED indicates the state of which partition ON or flashing – alarm or alarm memory in at least 1 partition
yellow
flashing – trouble or trouble memory
blue
ON – service mode is active and service menu is displayed flashing – service mode is active but service menu is hidden or displayed in another keypad
Display
Normal mode
Date and time or the keypad name are displayed in the upper line. Press to switch to the system preview mode.
System preview mode
Information on system state are displayed. The installer selects the items to be displayed. They can be date and time, partition / zone / output state symbols, power consumption, etc. Press to switch to the normal mode.
Messages
The keypad displays messages on:
- alarm
- entry delay countdown
- exit delay countdown
- alarm memory
Keys
press to enter digits (code, partition number, etc.) press and hold for 3 seconds to view the troubles press and hold for 3 seconds to turn on/off the keypad CHIME press and hold for 3 seconds to switch the keypad between the normal mode and the system preview mode press and hold for 3 seconds to trigger the medical alarm enter the code and press to arm in full mode [if the system is disarmed and there is no alarm] or disarm the system and clear the alarm [if the system is armed and/or there is an alarm] press and hold for 3 seconds to trigger the panic alarm
enter the code and press to enter the user menu press and hold for 3 seconds to trigger the fire alarm used for full arming (see: “Arming”) used for night arming (see: “Arming”) used for day arming (see: “Arming”) used to disarm the system and clear the alarm (see: “Disarming and alarm clearing”)
Daily operation
Arming
Arming with code
Partition 1 [code] – full arming [code] – day arming [code] – night arming Partition 2 [code] – full arming[ code] – day arming [code] – night arming Partition 3 [code] – full arming [code] – day arming [code] – night arming Partition 4 [code] – full arming [code] – day arming [code] – night arming All partitions to which you have access [code] / [code] – full arming [code] – day arming [code] – night arming
Arming with proximity card [only PRF-LCD-A2
All partitions to which you have access
bring the card close to the keys and move it away / bring the card close to the keys and hold for about 3 seconds (ask the installer which method to use)
Quick arming (without code / card)
Partition 1
- full arming
- day arming
- night arming
Partition 2
- full arming
- day arming
- night arming
Partition 3
- full arming
- day arming
- night arming
Partition 4
- full arming
- day arming
- night arming
All partitions
- full arming
- day arming
- night arming
Arming without delay
when arming, hold for 3 seconds the key used to select the arming type: , or (when arming with code, do it after you enter the code)
Terminating the exit delay countdown
when the exit delay countdown is running, press , or for 3 seconds (no matter which key you press).
Not ready for arming
if you tried to arm the system but the message “Not ready” was displayed, it means the control panel detected a problem: violated zone (e.g. open window), bypassed zone, tamper or trouble.
Disarming and alarm clearing
Disarming / alarm clearing with code
PERFECTA CONTROL application
The PERFECTA CONTROL is an application which enables remote operation of the alarm system from mobile devices. The application can also send push notifications with information on alarm system events. If the IP cameras are installed in the protected premises, you can watch video from these cameras in the application. You can download the application from the internet stores: “Google play” (Android system devices) or “App Store” (iOS system devices). The tutorial will assist you in the configuration process and show you what to do next.
To add a new alarm system that you want to control from the application, you will need:
- control panel IMEI number and ID number. You can:
- obtain them in the form of a QR code from the installer or a user who has already entered the control panel data to application,
- access them in the keypad ([code] ).
- your user code.
Failure to arm
The installer can configure the alarm system in such a manner that it will not become armed after the exit delay countdown ends. It applies to situations when the control panel detected a problem that was not there when the exit delay countdown started. Find out from the installer how you will be notified of the arming failure.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>