make it real 2110 Drink Wear A Taste of Fashion Instructions

June 10, 2024
make it real

make it real 2110 Drink Wear A Taste of Fashion

make it real-2110-Drink-Wear-A-Taste-of-Fashion

Product Information

The product is a DIY bracelet-making kit that includes beads, cords, and instructions on how to make three beaded bracelets.

The kit also comes with a water bottle that can be decorated with stickers included in the kit. The bottle should be washed
thoroughly with warm soapy water and rinsed well with clean water before use. The bottle should be hand washed only using a soft cloth to avoid damage.

Product Usage Instructions

  1. Read the instructions completely before starting the project.
  2. Attach the 30 cm (12 in) cord to the working surface with a piece of adhesive tape.
  3. Secure the knot by covering it with a drop of craft glue. Allow to dry for 5 minutes and cut off the excess lengths of the cord after the knot.
  4. Repeat steps 2 and 3 to make the other two beaded bracelets.
  5. Make sure to remove everything from the water bottle before use.
  6. Wash the water bottle thoroughly with warm soapy water and rinse well with clean water before use. Hand washes only. Use a soft cloth to avoid damage to the bottle. Wash thoroughly between uses.

For more detailed instructions, visit makeitrealplay.com for video instructions.

WHAT’S INSIDE

make it real-2110-Drink-Wear-A-Taste-of-Fashion-1

You will need

LEGEND

Scissors

Adhesive tape

Craft glue

Clear nail polish

Let dry

Repeat

READ THE INSTRUCTIONS ALL THE WAY TO THE END BEFORE STARTING YOUR PROJECT.

COIL BRACELETS

  1. Decorate the coils with the charms.make it real-2110-Drink-Wear-A-Taste-of-Fashion-5
  2. The coil bracelets can be worn on the wrist and as hair ties.

BEADED BRACELETS

  1. Measure and cut 30 cm (12 in) of elastic cord.make it real-2110-Drink-Wear-A-Taste-of-Fashion-7

  2. Attach the 30 cm (12 in) cord to the working surface with a piece of adhesive tape.

  3. Thread the beads on the cord following the sequence shown.make it real-2110-Drink-Wear-A-Taste-of-Fashion-9
    Tip:
    Mix up the components to create your own bracelet!

  4. Make a double knot using the ends of the cord.

  5. Secure the knot by covering it with a drop of craft glue.make it real-2110-Drink-Wear-A-Taste-of-Fashion-11make it real-2110-Drink-Wear-A-Taste-of-Fashion-15

  6. Repeat steps 1 to 4 to make the other two beaded bracelets.make it real-2110-Drink-Wear-A-Taste-of-Fashion-12

Before wearing the bracelets, gently pull on them to make sure they are well secured!

Avoid soaking the bracelets in water.

WATER BOTTLE

  1. Make sure to remove everything from the water bottle before use.
  2. Wash with warm soapy water and rinse well with clean water before use.
    Hand wash only. Use a soft cloth to avoid damage to the bottle.
    Wash thoroughly between uses.

WARNING!
CHOKING HAZARD – small parts. Not suitable for children under 3 years.
Remove everything from the water bottle before use. Wash with warm soapy water and rinse well with clean water before use. Hand wash only. Use a soft cloth to avoid damage to the bottle. Wash thoroughly between uses.
Water bottle is safe for cold water only. Do not soak exterior of bottle to protect the images and designs. Not microwave-safe. Not dishwasher safe.

MAKE IT REAL
1700 Reisterstown Rd Ste 211
Pikesville MD 21208 USA
410-995-8685

Jactin House, 24 Hood Street
Ancoats Urban Village, Manchester, M4 6WX UK
+44 (0) 161 302 4100

EU RP: EUCEREP B.V.
Roald Dahllaan 33 5629MC, Eindhoven, NL
+31685008887

© 2021 MAKE IT REAL, LLC

Go to makeitrealplay.com for video instructions!
Visite le site makeitrealplay.com pour des instructions video !

makeitrealplay.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

make it real User Manuals

Related Manuals